Error Message - Admin Access

Computer: Satellite L755 -
OS: Windows 7 64 bit
I have just installed a Paint Shop Pro X on my laptop but it will not play at all.
This is what happens:
- installed the program
- installion completes, I open the program
- I get error that states: You must have administrator level access to access the program for the first time.
What is wrong?
Also, WHY do I not have administrator privileges? I am the only user and I AM an administrator.
I keep getting the “must have administrator privileges” message at other times as well.
I AM THE ADMINISTRATOR!!!
(I called your tech support and they are completely useless and had no idea what to tell me to do. THis was after he placed me on hold 6 times)

I tried to run the program as the administrator and I rec'd the same error message.
You need to right-click the executable itself (not a shortcut to it) and click Run as administrator.
If necessary, you can set up a shortcut that opens it this way.
Please tell us which Satellite L755 you have when you post here. There is a label on the bottom.
-Jerry

Similar Messages

I am trying to download itunes and keep getting an error message cannot access network location %appdata%

I am trying to download itunes to windows 7 and keep getting the error message "cannot access network location $APPDATA%\." I have contacted an Apple advisor and was not able to resolve the problem. What to do?

Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
https://discussions.apple.com/community/itunes
B-rock

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

Use another browser.
Mylenium

Error message when accessing account/ contact list

Hi experts,
One of our users encountered this error message when accessing account and contact list.
message=>
Error: originating at /OnDemand/user/AccountList
拒绝访问。(SBL-DAT-00542)
Weird thing is she has exact the same user set up as others (same role, privilege, pagelayout, etc), but only she got this problem.
Does anyone know how to fix this, please?
Thanks,
Sabrina

Sabrina, I would recommend contacting On Demand customer care in reference to this issue.

TS2776 error message 'cannot access conflict information sync server'

I recently can't sync my iPhone with my Microsoft Outlook calendar. I receive an error message 'cannot access conflict information sync server. Try again later.' Help!

You are trying to use conflicting services for sync, disable all the ones that you do need. Once only one is enabled, you will be OK

Unable to send emails, get error message that access to server is denied...problem began a few days ago

For the past few days, since the Thunderbird update, I have been unable to send any emails from my thunderbird account. I have also tried going into my juno account online, and any emails that I send out come back with the mailer demon response - tha the email did not go through. With help from Juno I have tried to reconfigure my account, turn off my Anti-Virus and Firewall (Norton 360) changed my password many times, but nothing is working.
This is the error message that I receive...An error occurred while sending mail. The mail server responded: Access denied...4664b9656464c9c921b121b9b9c5354d11b420a93520358d357984a56d99d1cd24a07174e57559e0b1f00c7149f025b925ed4d45140c20f5.... Please check the message and try again.
In the past, I have received this message and was told by Juno to change my password. When I did that, I was again able to send out emails. But this time nothing has worked. I even tried a system restore to go back before the Thunderbird update, but that did not help either. I really need to use my email, and just can't imagine what has happened to it. I am not sure if this is a problem for Thunderbird or for Juno my email server. Please advise. thanks.

To diagnose problems with Thunderbird, try the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
Note that Norton's is notorious for not being "off" when their interface says they are. Safe mode with networking guarantees that.

Drive restriction group policy causes error message when accessing Open and Save As Dialog Boxes on Windows 8.1

We are running Windows 8.1 Pro x86
I am really curious as to why the drive restriction group policy causes the error message to pop up:
"This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."
It does not prevent from actual saving so functionality is not lost but it really annoys our end users and we're getting a lot of complaints. We cannot use the workaround of hiding drives instead of restricting as this still presents security issues. This
is happens when saving (or clicking on a button like "Browse" that opens the 'Open' dialogue box) in all Office 2013 applications, Internet Explorer, Paint, Notepad, and probably most others. I've looked at many forums and no suggestions for workarounds
have succeeded for us to get rid of this error message and in fact, I read a post that stated that someone contacted Microsoft and they said this was by design and there is no workaround. I find this very unfortunate that we either have the choice of compromising
security or annoying our end users. It seems to me like the new dialogue box in Windows 8.1 (and maybe 8?) attempts to access the local drive under the logged in user's account before it actually opens up the dialogue box which conflicts with the group policy
that restricts access to the drive.
Has anyone at all had any luck getting this to go away without removing the restrictions? It seems like the answer is either buried in the Windows code or somewhere in the registry.
Thank you in advance for your time!

Thank you for your time and response! Unfortunately, we have the machine locked down pretty tight (they are public use computers that require heavy restriction) and it is set to restrict all drives so access is limited to the local profile. We did try
testing your method, however, by adding the Desktop as an allowed location in the Office policy (which would not solve the issue for the other applications but was good for a test) using the path %userprofile%\desktop. When choosing that location, it does
not throw the error but unfortunately, it does not remember like it did for your with the E: drive so it still always throws the error when first loading the dialogue box no matter what I do. If you're able to confirm that this is simply by design and we're
just expected to inform our users to click through the errors, then I guess that's the accepted answer. Although, do you think that there might be a registry key value that is set after you save to the E: drive for the first time? Maybe we could set that value
to %userprofile%\desktop if it's doing the redirection after the first save through registry. Thanks again!

HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method.

Error message in accessing a PDF file, using AR V.9.2.0

When I run the following code, I get the error message as in the attached file. The PDF file was created using ScanSoft PDF Professional.
Personally, I am getting rather fed with AR - the last version crashed my Internet Explorer V8 (and V7), but it worked with the following code..
==================================================================================
<html>
<body>
<div>
<object width="800" height="800" data="STTA_Monthly_Stats.pdf#toolbar=1&
navpanes=0&scrollbar=1&page =1&view=FitH" type="application/pdf" title="Title of this pdf file">
<p>Your browser does not support embedded PDF files.</p>
</object>
</div>
</body>
</html>
==================================================================================

Accessing PDF file attached.

Error message while accessing portal's desktop in wlp10, thanks

Dear All,
I created a portal based on WLP10.
I use the Weblogic Portal Administration Console for setting up the
navigation on different roles.
After I added a portal called "portal", and a desktop called,
"portalDesktop", I got an error message when I accessed to view the desktop.
The message is:
Resource /portal/mydesktop could not be resolved for locale null.
Please let me know if I overlook any configuration part.
Thanks,
It often seems that I have only typical and common things to say, in which case I join my voice or my vote to that of others. -- Jacques Derrida

yeah, i felt weird too.
I tried to connect
http://localhost:7001/WARportal/appmanager/portal/portal
but still the same error msg pops up again and again
"Resource /portal/portal could not be resolved for locale null."
And the thing is, when I first time deployed the portal desktop, it works fine. But when I've done some changes on the portal code, and published it, I found the changes are not working for the desktop accessed through appmanager, but works fine with if you launch it in workshop.
So, I delete the previous node, and resetting and deploying it again, then the error make me stucked there.
I was wondering, is it possible clean the portal and desktop information in any xml file or file folder.
Please advice, thanks
It often seems that I have only typical and common things to say, in which case I join my voice or my vote to that of others. -- Jacques Derrida

Error Message when accessing songs

Error Message:
The song "1000 Miles" could not be used because the original file could not be found. Would you like to locate it? Yes or Cancel
I recently lent my computer to a friend who wanted to copy some of my music from itunes. When i got my computer back i now can not access my all of my music.
My songs are still located under My Documents, My Music which means they are not deleted however when i try to play them through Itunes i receive the above error message.
I have tried to fix this by re-uploading my music library however this has not completey worked. Some songs can now be accessed and others can not.
If you know how to fix this please get in touch. My hotmail is [email protected]
Many thanks
Sheree

Sabrina, I would recommend contacting On Demand customer care in reference to this issue.

Why do I get an error message 'write access not granted' when I try to copy paste jpegs from my folder on desktop to an external hard drive/(Transcend)pendrive

This is a new problem. I transferred some images from my Nikon camera via image capture but converted my raw files to jpegs in the Nikon View nx 2 software and saved them in a new folder on my desktop. I use a 2010 MBP that has OS10.9.5 fully updated. When i tried copying and pasting the jpegs to an external pen drive I got an error message saying the jpg (the number) could not be saved as write access is not granted. I thought the pen drive may be full. So I attached an external hard drive. got the same message. I then opened the same jpeg in photoshop cc and tried saving it as png on the hard drive, got the same message. Was unable to handover the photographs to my client. Was hugely embarrassed. Pl let me know if there is a way out of this and if its a Mac OSX issue? Thanks.

right click on the jpeg (the other mouse button then you use to click with) or on trackpad, hold down control and click, in the menu that pops up, click on "get info" next, if the box labeled "locked" is checked, uncheck it. Down at the bottom, there should be a box with your user name, "staff" and "everyone". to the right of this are options to change these you may need to click the small padlock icon and enter in your password. then change all of the permissions to read and write.

Ical server error message when accessed remotely

hello we have a 10.6.7 ical server running mostly smoothly when accessed from the LAN.
however, when accessed remotely it generates the following error message:
The server responded with “HTTP/1.1 501 Not Implemented” to operation CalDAVAccountRefreshQueueableOperation.
the message provides the following 2 responses / buttons: stay offline or go online - trouble is once you click go online, it comes up with the same message again.
unfortunately, research the error message has so far not produced any promising results, thus any ideas would be much appreciated.

There are many reports here on this site about this, crossing different carriers and regions of the world. Consequently, the only deduction that can be made is that this is a system-level issue rather than a single user issue. Hence, what each affected user must do is contact their mobile service provider for formal support and possible escalation up to BlackBerry.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Reader error message when accessing documents on other websites

have repaired adobe reader twice, still get "adobe reader error" message when trying to access my visa acct. run vista home basic. What is problem. Also seems to cause windows to close IE on me through daa execution program. I am a thoroughly confused computer nerd on this.

We cannot know. Your information is way too vague to make any sense of it and the whole affair sounds utterly unrelated to Adobe software in the first place. Perhaps some security tool running amok, perhaps simply a missing system library, perhaps a failed install. Who's to say?
Mylenium

Error Message - Admin Access

Similar Messages

Maybe you are looking for