Error message: Adobe encore no longer works

I am working with Premiere Pro CC and Encore CS6, finished one project, burned blue ray, all OK.
On the next day, i could not start a new project, encore opens, the error message comes, it is only possible to close encore.
Opening a old project causes the error: no access ??? Same problems with admin rights.
I have a Windows 8.1 x64 System, installed Encore CS6 again, the error messages come every time.

>Same problems with admin rights
Right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD or a BluRay, you must have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)

Similar Messages

  • I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working"

    I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help.  I get the same message. What to do?

    Can you open Reader by itself?  If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Adobe Acrobat X Pro - Error Message : "Adobe Acrobat Has Stopped Working"

    I use Windows 7 - 64bit / CS6 Master Collection that has Adobe Acrobat x Pro.
    When the computer is on for a little while, Acrobat would generate the error message that it has stopped working and then shuts down. Once that error message occurs, I cannot get Acrobat to stay open. It opens the PDF document, stays open for a few seconds then the error message occurs and it shuts down.
    What helps for a short term is to restart the computer. This seems to temporarily remove the error until the computer is on for a while then the error returns.
    This problem repeats. Product repair feature does not work. This has nothing to do with the license, I tried that fix and it made no differnce. I do not have this issue with other Adobe products included in the master collection.
    It seems fruitless and frustrating to send a message to Adobe Support, the run around with pages and links is like smacking walls on every turn, it is obvious Adobe does not want people contacting their support. Service from Adobe for their products is poor.
    I hope that someone here has the answer to the problem. Anyone?

    Ok, here is the update.
    The link: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html , leads to a webpage that says to download a fix ZIP file named: "Acrofix.ZIP". It contains the file "acrofix.exe".
    I did use this "exe" file about 2 months ago and it did nothing to fix the issue. I used it again today, because the same issue of "Adobe Acorbat has stopped working", occurred again and again it did not work, the problem of "Adobe Acrobat stopped working" presists. Again the only work around, which is temporary, is to reboot the computer.
    So far these do not work:
    Relicensing or Registering the Licence
    Acrofix.exe
    Anyone else have an answer? - or am I the only one suffering this really annoying issue?

  • Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

    Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

    Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, download the full offline Reader installer from 
    http://get.adobe.com/reader/enterprise/
    and run it immediately after restarting your computer.

  • Error message "Adobe Acrobat has stopped working"

    I just upgrade to Acrobat 9 Std. I am running windows vista. When I open Acrobat and try to create a PDF I receive a message "Adobe Acrobat has stopped working" then another one "Windos will close the program and notify you for a solution", What shoul I do ???????
    Mauricio.

    If you have not updated to the most current version, you might try that.

  • Adobe Reader on Toshiba laptop Windows 8 Error message: Adobe Reader has stopped working

    I uninstalled and reinstalled Reader and it works on the finish page but when I click on it I get the above message.  Below are the full details from the error message.
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    AcroRd32.exe
      Application Version:    11.0.3.37
      Application Timestamp:    518e18e3
      Fault Module Name:    StackHash_5861
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    PCH_0C_FROM_ntdll+0x0002E1A4
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.2.9200.2.0.0.768.101
      Locale ID:    1033
      Additional Information 1:    5861
      Additional Information 2:    5861822e1919d7c014bbb064c64908b2
      Additional Information 3:    f3d5
      Additional Information 4:    f3d5be0cad2787556264647dc02181c3
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=190175
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt

    guygriff wrote:
    it works on the finish page but when I click on it ...
    Sorry, I do not understand this.  But some things you can try when Reader is aborting...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Error message Adobe InDesign has stopped working as soon as I open the application

    I had a computer crash on Friday and I just reinstalled InDesign this weekend and it has worked fine. This afternoon I started to receive an error message that Adobe InDesign has stopped working and Windows will close the program and notify me if a solution is available. I've rebooted and closed every other program. I have also been downloading my lost files from Carbonite since yesterday and have paused the download. Do I need to uninstall the program and reinstall?

    Use System Restore to go back before the crash.

  • Error Message: Adobe Reader has stopped working correctly.  Windows will close the program and notify you if a solution is available.  I have uninstalled the reader program and reinstalled the reader program.  The same error message appears.  Help

    Does anyone have an answer to the above error message?

    Can you open Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • Error message: Adobe Flash Player 11.6 r602 stopped working and was closed

    I keep getting this error message: Adobe Flash Player 11.6 r602 stopped working and was closed.

    elmer33 wrote:
    I loggin by selecting "Run as Administrator".  Does this qualify as being logged-in as Admministrator?   If so, this still does not allow deletion of the intended file.
    Thanks for your suggestions.
    Use File Assassin. If it can't remove it. it CAN'T BE REMOVED.

  • ERROR MESSAGE "MACROMEDIA PROJECTOR HAS STOPPED WORKING"

    I am using Windows Vista, and can no longer play any of my
    games. Was able to play before now I get this stupid
    error message: "Macromedia Projector has stopped working." I
    have tried redownloading the games again, tried redownloading the
    Flash and shockwave players, still nothing. HELP!

    I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
    This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
    Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

  • I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    Thank you for responding.  Nothing actually worked!  After reading the posts online, I called Apple.  They indicated they have seen problems with some software after their upgrades.  The technician was able to fix the problem on my computer remotely, but I have no clue what he did!  But, it was definitely related to their recent upgrade to my computer.

  • I have downloaded Adobe Photoshop digitally but when i activated adobe I keep getting this error message Adobe Premiere Elements.exe - NO DISK. There is no disk in the drive. Please insert a disk into drive/device/harddisk/dr1

    I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1

    It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
    If you meant Adobe Photoshop Elements, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content
    If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    Right click your document, hover over "Open with..." and then click "Other".
    Find TextEdit and click "Open".
    TextEdit will then do it's best to open your document.
    If you have iLife, do the same but instead of opening with TextEdit open with Numbers, Pages, Keynote, e.t.c.
    To download iLife, click here.
    If the above link does not work, click here.
    -----EDITS-----
    Added "If the above link does not work" at the bottom of the post.
    <Edited by Host>

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

Maybe you are looking for

  • Screen goes black / fine in safe mode

    My g4 has original 64mb agp card. when i boot it looks ok just before the mac os screen then it goes black if i boot in safe mode , everything appears ok , but there is some interference lines on the screen(can change res etc. ) boots ok in single us

  • Invoice for subcontractor ?

    I have a doubt regarding subcontraction cycle, I have tested one scenario for the same as, 1.Created a PO, having Item category L, ticked and maintained the SC Vendor in the delivery address tab and Maintained the component in the Material tab pages

  • Window parameter in navigateToURL function

    Hi all, I have a frame based HTML file in which my SWF is displayed in the left frame. My SWF file has a button that simply, when clicked, displays a HTML file in the "rbottom" frame. Following is the code I used: var a:String; function aboutmeClicke

  • How to move elements (figures and tables) to float

    Hi all, We have created an XSLT for the XML-IN in Indesign, its working fine and all the styles are applied automatically and figures and tables were placed as inline. Now we need to move the INLINE elements to FLOATING. How to move the INLINE elemen

  • Speedgrade CC always creates keyframe for 3D geometry modification

    Even though I have Auto Keyframe Creation disabled,  every time I modify a stereo clip's geometry,  a new keyframe is created at the playhead.   Any idea how to stop this???