Error message after clicked the SRM "Full Functionality" tab

Hi, SRM gurus,
After I logon to SRM and clicked on the "Full Functionality" tab, I immediately got the following error message.
Short Text of the Message: Object type SCH is not supported
URL: http://augustus.corp.bcm.tmc.edu:1080/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Path: /sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Message ID: BS
Message Type: E
Message No.: 018
Message Variable 1: SCH
Message Variable 2:
Message Variable 3:
Message Variable 4:
Error Code: 560
Error Text: ERROR_MESSAGE_STATE
Runtime Error: Object type SCH is not supported
ABAP Call Stack: Method: CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CREATE_NEW_INSTANCE of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CONSTRUCTOR of program /SAPSRM/CL_CH_WD_BOM_SC=======CP
I had no problem at other tabs like "Order Status", "Advance Search".
Where should I look to resolve the issue?
Thanks in advance!
Best regards,
Fisher Li

...SRM and clicked on the "Full Functionality" tab...
I have never seen this tab. Is it a custom tab? In any case, by looking at your error message, I suspect somewhere in your iView definition, the object type is mistaken. Instead of "SCH", it most likely should be "SHC", which is the default process type for shopping cart.

Similar Messages

Where can I download CRX developer edition ? Im geting error message on clicking the Download link

Where can I download CRX developer edition ? Im geting error message on clicking the Download link.
Someone pls help me to download CRX.
Thanks in Advance.

Hi Jayanth,
Are you able to down load the develoer version finally?

I get an error message after downloading the latest update. It says to download only and then to install manually. How do I fix this?

I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.

The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

ITunes (windows) crashes after clicking the Movies or TV tabs in the store

I'm getting really frustrated with this. EVERYTIME I click the Movies or TV shows tab in the iTunes store the storefront comes up saying that my browser does not allow for the images to be viewed and then I get a windows error message stating that the program has encountered an unexpected error and needs to close. Please help me fix this. It caused my computer to crash and I lost ALL of my purchased files.

i'm having this problem too!!! i have the most current version of iTunes. i had a nano and just bought the 30gb ipod so i can watch movies and stuff while at work...so far no luck : ( it keeps sending an 'error report' but nothing has changed, and its been 2 days now....arrrgh! what do i do?

Error Messages on clicking the previous button from the review of PCR.

Hi,
When we fill the PCR form and review it. it works fine.
Once i click the 'previous' button from the review stage, A pop up window with title - 'Adobe Reader' comes up which says - 'Message limit exceeded <a number> errors not reported'.
Does this have to do with the Action methods of this button.
This is common across all forms including the standard forms delivered by SAP.
Any pointers or duggestions to this will be highly appreciated.
s/m - NW2004
reg: ISR Adobe forms
Kindly help.
Regards,
Anto

Hi Anto,
i've seen this message too in the ISR scenario on NW2004. It is related to the Active Component Framework (ACF). Please try installing the most recent xACF file. See note 766191 for more info and a link to the file for SP18.
kind regards,
Marijn Sponselee

HT4972 I have an Iphone 4 and each time I try to update to iOS 7.0.6 I receive an error message after attempting the update. I have gone through the update process about 3 different times, and each time I get the error message after about 30 minutes.

I have an IPhone 4 and each time I try to update to iOS 7.0.6 I receive an error message. I have gone through te update process about 3 times and each time I get message saying there was an error and it was unable to update.

What is the error message, and the error number specifically? You can look it up here: http://support.apple.com/kb/TS3694

Error message after write command

Hi,
i have a program that will display an error message after a write command...
it goes like this: when you click on the button change material it will go to the transaction MM02 and when you saved your changes the value of the table will refresh but when it was refresh and there is no data that would retrieve an error message will pop-up no data selected..but when you click on the check button or enter the previous data still appears which is wrong it should go back to the selection screen...
can anybody can help me with this?
thank you...
regards,
mae

hi,
i am currently in the output table with a valid data and when i change the procurement type from E to F at the button change material(transaction MM02) it should display an error message after saving the changes and then go bak to the selection screen not on the previouse output table...
how will i do it?
thank you

After re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

after re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

dgrparker a écrit:
photoshop element 2.0 - on windows 7. the program ran fine on the old HD, but this error popped up when I re-installed it on the new HD
Elements 2.0 is an old version. The message may be due to the fact that your new HD is much bigger than your older one, and not due to the classical reasons:
http://www.easyelements.com/scratch-disk-is-full.html

Unknown error message after I click sign in from the app stort

Hello ,Excuse me if this has already been discussed.
I have been prompted to download a new version of iphoto after discovered it missing my mac pro
I get an "Unknown error" message after I click sign in from the app store to download.
I can't download and I can't find iphoto.
Have I lost all my I photos is one question I have.
Thank you

Your photos should be safe as they are in the Library.
As to the download issue: contact Mac App Store support. There's a link on the right hand side of the Store Window.

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to ex

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to extract Adobe Photoshop Elements 13. Please download all parts.: I've also gotten an Exit Code: 7 when trying to install. I've turned my McAfee virus system off while trying to install.

Hi,
Have you tried downloading Photoshop Elements 13 from here?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
There is only one file to download - which one depends on your system (32-bit or 64-bit).
These are the trial versions but will convert to the full version when you supply your serial number.
Brian

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I have Nuance PDF Converter 7.2 and after I scan a document and want to email it, I get an error message that says the scan cannot be attached to an email.

I want to be clear: I can scan the document with Nuance PDF Converter 7.2, but after the scan, I want to email the scan to someone.
When I click on the word "email" on the left side of the Nuance screen, I get a failure message. For a couple of years this process worked without a problem. I was told by Nuance Support that the problem was in the email software. Is there something on a drop
down menu that I can click on the resolve the problem? Thanks.

The problem could be that your computer doesn't have Thunderbird identified as the default e-mail program, so the first step is:
Thunderbird: Menu bar: Tools: Options: Advanced Tab: System Integration:
Press the "Check Now..." button.
In the resulting "System Integration" window, make sure that "E-Mail" is check-marked, and "Always perform this check when starting Thunderbird" is checked. Then click the "Set as Default" button.
If you have Windows 8 or 8.1, then there is also another step: 
Windows Control Panel: Programs: Default Programs: Set your default programs. 
Find "Thunderbird" on the left side, and click to select it. 
On the right side, click "Set this program as default". 
Then reboot the computer. 
If the problem still exists, then do a clean install of Thunderbird:
Certain Thunderbird problems can be solved by performing a ''Clean reinstall''. This means you remove Thunderbird's program files and then reinstall Thunderbird. Please follow these steps:
#Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
#After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
#Delete the Thunderbird installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#** C:\Program Files\Mozilla Thunderbird\
#** C:\Program Files (x86)\Mozilla Thunderbird\
#*'''Mac:''' Delete Thunderbird from the Applications folder.
#*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
#Now, go ahead and reinstall Thunderbird:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
WARNING: Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions, emails, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!
Please report back to see if this helped you!

Error message after clicked the SRM "Full Functionality" tab

Similar Messages

Maybe you are looking for