Error Message after Installing 9.2 Update

I installed the 9.2 update and it worked fine. When I tried again today I just kept getting two error messages
1. Really long message about CoreGraphics.dll
2. Error 7 (Windows error 193)
I tried to fix, uninstall and reinstall itunes but no change. What can I do? I wanted to sync my phone with my itunes library

1. Really long message about CoreGraphics.dll
2. Error 7 (Windows error 193)
That's almost certainly a damaged Apple Application Support, anna.
If you've got a 32-bit version of Vista, try the procedure I describe to Jroth in the following thread:
http://discussions.apple.com/thread.jspa?threadID=2256037
If you've got a 64-bit Vista, try the procedure I describe to fizzylove in the following thread:
http://discussions.apple.com/message.jspa?messageID=10918603#10918603
Note: since posting the fizzylove procedure, the download location for the 64-bit iTunes installer has changed. You can now find it at the following location (at the time that I write this reply, at least):
http://support.apple.com/kb/DL1037

Similar Messages

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I get an error message after downloading the latest update. It says to download only and then to install manually. How do I fix this?

I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.

The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.

Error message after installing 10.8.2 update

After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?

I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise.
? some launchd process calling usereventagent which then crashes
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
abort() called
terminate called throwing an exception
This is on a 2.66 GHz Quad-Core Xeon. No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times).

Error message after installing latest update

Since installing latest update 11.0.2.26, I am receiving error message: An unknown error occurred (-42110)
Itunes does work, however, when I close this message down.
Can anything be done? What does it mean? Am I better off just holding out until the next update and hope it fixes itself?

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Error Messages after Instaling 10.6.2

After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
Thanks A Lot For Your Help

Trying to update with the latest drivers didn't do me any good.
HP has the worst software and horrible update instructions.
This is the page that purports to having the latest for snowleopard
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
HP also has this firmware update:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
There are no instructions telling me if this has or has not been included in my printer.
I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
I'm never buying another HP anything. Especially if Apple offers me a "deal" on it.

Error Messages After Installing Leopard 2

After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
There are a number of messages like this. What shall I do?

Download and install this update, even though you've already updated.
(26492)

Error Message after installing Photoshop & Illustrator (CS2) on new iMac

When I launch Illustrator or Photoshop (both CS2) on my new iMac 2.8 GHz, I get the error message: "Connection Failed. server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again."
I click OK and they open, but this behavior is getting OLD. I've uninstalled and re-installed and I continue to get the error every time I open these applications. It only happens with Illustrator and Photoshop. I'm in the process of transferring all my files and apps from my old G4 which is connected via ethernet. I've de-activated and removed the old copies on the G4. Does anyone know what is causing this error message and how I can remedy the situation? Thanks for your help.
(24" 2.*GHz Core 2 Duo iMac / OS 10.5.6 / 2 GB memory)

I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far.

I receive error messages after installing Illustrator and InDesign

Before today, I spent 3 days downloading the trial programs for Design & Web Premium CS6:
Photoshop, Illustrator, InDesign, Audition, Bridge, DreamWeaver, ExtendScript Toolkit, Extension
Manager, FireWorks, Media Encoder, Muse, Prelude, Widget Browser, Flash Builder 4.7, Flash Professional and Media Encoder. (This is all through my online classes, and I do have a serial number that was sent to me, but no CDs.)
I used Adobe Application Manager to install them.
Everything downloaded and installed fine on my main computer (running Windows 7), but on my older,
slower, backup computer (running Win XP) I encountered problems.
I have DSL (the lowest speed, 1.5), Win XP (32 bit) SP2, 28.6 GB capacity hard drive.
Used space (after the downloads): 17.2 GB (61%)
Free Space: 11.4 GB (39%)
Downloading the trial on my Win XP computer gave several errors, and I had to re-install and/or update (at first it would say 'Try,' but then after that was done, some of them would say 'Update') most of the programs several times before they finally all seemed to fully download OK. For one of the programs, it gave an error saying there was not enough hard drive space. So then I deleted a few programs from my hard drive. But all the other programs gave different errors, which would say that they installed, but that there were problems, or that they could not install, etc.
But, after downloading everything, and everything seeming to be OK, when I tried to open Photoshop CS6 (trial version), it said:
Photoshop.exe - Entry Point Not Found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.
(And it had the red circle with the white "X" inside it.)
I then tried to open Illustrator, and it said:
"Illustrator.exe - Application Error
The application failed to initialize properly (0xc000001d).
Click on OK to terminate the application."
I then tried to open InDesign and it gave the same error as Illustrator.
So then I ran all my anti-virus, anti-spyware and diagnostic software to see if there were any viruses or spyware or malware found. Nothing was found except some tracking cookies.
Then I uninstalled all the Adobe software, which took a while.
Then I used Adobe Application Manager to only download Photoshop. It seemed to download and install, but finally it said, “Installation completed though some optional components fail to install correctly.” This is one of the errors I had gotten previously. When I clicked to see more info about the error, it said to either find a certain file, which I could not find because it looked like some of the files it mentioned were invisible files, or it gave another option, to download Microsoft Visual C++ 2010 Redistributable Package (x86).
So I went to Microsoft’s website and downloaded that. But when I tried to install it, it said I needed to install Windows Installer 3.1 or higher. So I went to that website and downloaded that (the downloaded installation file was called WindowsInstaller-KB893803-v2-x86.exe. So I installed that.
Then I went back and tried to install Microsoft Visual C++ 2010 Redistributable Package (x86) again (that installation file is called vcredist_x86.exe). After it extracted the file, it said, “Microsoft Visual C++ 2010 x86 Redistributable Setup: (red circle with white “X” inside) “Setup has detected that this computer does not meet the requirements to install this software. The following blocking issues must be resolved before you can install Microsoft Visual C++ 2010 x86 Redistributable Setup software package.” “Please resolve the following: A newer version of Microsoft Visual C++ 2010 Redistributable has been detected on the machine.” Then at the bottom of the error window, it said: “Please, see the Microsoft Visual Studio website for more information.” Then it only had a “Close” button.
I went to the Microsoft Visual Studio website, but I’m not sure what to do. It has an Office Developer Tools for Visual Studio 2012 (“Now you can create rich, immersive apps for Office 2013, SharePoint 2013, and Office 365.”) with a “Download Now” button, but that does not sound to me like what I need.
I saw, on one Adobe site, a suggestion to go to the Adobe Creative Cloud website and download the software from there (which I noticed also used the Adobe Application Manager). So I did that for Photoshop, and after it installed and updated, it gave me the same error: “The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.”
As of Friday March 29, I have been working on downloading and installing the software for FOUR (4) days now without success, and it is just so frustrating because it is taking so much time and effort.

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

Error message after installing Office 2013 from DVD

After i install office 2013 on new Win 8.1 Pro laptop , i can start in control panel mail 32 bit option to configure accounts...
i found error in event logs:
Log Name: Application
Source: Application Error
Date: 2014-06-24 5:20:58 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: PMCHome
Description:
Faulting application name: rundll32.exe, version: 6.3.9600.16384, time stamp: 0x52158827
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x531812f4
Exception code: 0xc06d007e
Fault offset: 0x00012c1a
Faulting process id: 0x1180
Faulting application start time: 0x01cf8ff2304d4f6f
Faulting application path: C:\Windows\SysWOW64\rundll32.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: 6ebd5d06-fbe5-11e3-8263-7c7a9101e4d2
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-24T21:20:58.000000000Z" />
<EventRecordID>1851</EventRecordID>
<Channel>Application</Channel>
<Computer>PMCHome</Computer>
<Security />
</System>
<EventData>
<Data>rundll32.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>52158827</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.16656</Data>
<Data>531812f4</Data>
<Data>c06d007e</Data>
<Data>00012c1a</Data>
<Data>1180</Data>
<Data>01cf8ff2304d4f6f</Data>
<Data>C:\Windows\SysWOW64\rundll32.exe</Data>
<Data>C:\Windows\SYSTEM32\KERNELBASE.dll</Data>
<Data>6ebd5d06-fbe5-11e3-8263-7c7a9101e4d2</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Can some answer why?
Fresh install, no errors in install at all
Regards

Hi,
Rundll32.exe is responsible for calling Windows DLL (or Dynamic Link Library) files and loading them into your PC's memory.
Usually the rundll32.exe Application error is not a straight forward error. There are lots of possible reasons for this error, includes a failed or incorrect installation or uninstallation of any softwares, which might have left erroneous Windows registry
entries.
Tracking down the exact issue can take lots of investigation. The severity of this error really depends, if everything works well for you, you can just ignore it. However, if you want to correct this, try below steps:
Since you notice this error right after you installed Office 2013, try to remove and re-install it using default setting.
Reboot your computer, many programs require a reboot for successful installation.
Try to update your computer drivers. This is usually the cause of lots of .dll file error.
Try to run the System File Checker tool (SFC.exe) to correct any incorrect system file. It is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files:
http://support.microsoft.com/kb/929833/en-us
Hope this helps.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

Error message after installing Acrobat 8.1 in Vista

I bought the Technical Communication Suite in June 2008, and installed it on my old computer, which was Windows XP.
Now my old computer has died, and I just bought a new Dell Studio with Windows Vista 64 bit. So now I'm trying to install in the new computer. I turned off my virus protection software, and then installed FrameMaker and Acrobat.
I received several FrameMaker errors which are now resolved, but I still have the following Acrobat error.
When I open a pdf file, I get a warning that says "A part of the Capture 3d plug-in has been damaged. To fix it you will need to repair the installation of Acrobat. This may have been a result of an anti-spyware application modifying the system's registry"
That doesn't make sense to me because I had turned off my virus protection before starting the install. I also tried rebooting at various times, but still get that message. However, I AM able to create pdf files, so I'm not sure if they're damaged in some way that I can't see. But even if they're OK, I certainly don't want to see that error message every time I create a pdf.
Any ideas?
Gilda Spitz

Thanks Bill. Sorry it took me so long to reply - today was my first chance to play with your suggestions.
Unfortunately I still have the error message about 3D not installing correctly. I did several updates to Acrobat 8, getting up to 8.1.6. Then I found an update for Acrobat 9 for VISTA 64 bit (which is what I have) so I tried that too. Still no luck getting rid of the error message.
I don't think the error message is causing any trouble because my pdfs seem fine, and I don't use the 3D functionalitiy. I thought that maybe I could just disable the 3D functionality, but I can't find a way to do that. Any ideas?
Gilda

Error messages after installing mavericks

as soon as i installed mavericks i started getting error messages - "com.apple.safariServices quit unexpectedly while using the WebKit2 plug-in" i get a similar message about ibooks, can anyone help me? i cant open either of them?

Download and install this update, even though you've already updated.
(26492)

I have OS10.6 and when I try to update I receive error message after validating packages and updates to not tke.

I have OS10.6 and when I try to upload updates I receive an error message when validating the packages. No updates take place.

Are you using Software Update? And what is the error message?
You are on 10.6.0? Why don't you download the combo updater for 10.6.8 directly from Apple and try to install it from there:
http://support.apple.com/kb/DL1399

Error message after installing CS6

After installing CS6 from disk error message said, "Some items for the following product(s) could not be installed successfully." The message then listed five of the eight applications in CS6. I can't find any info about where to go to identify and resolve the issue. Please advise.

Check the install logs for errors and then use the below link to troubleshoot accordingly.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Installer Log Locations:
mac: /Library/Logs/Adobe/Installers/[Adobe Application name<date>].log.gz
win: c:\Program Files\CommonFiles\Adobe\Installers\[Adobe Application name<date>].log.gz

Error Message after Installing 9.2 Update

Similar Messages

Maybe you are looking for