Error message after installing latest itunes

Hi,
I have just downloaded the latest version of Itunes and after quitting tunes & retrying, because the UK store will not load(WHY???). I get an error msg. as follows "applesyncnotifier.exe"
core foundation.dll not found. Any ideas anyone.
Gramps

One other suggestion I've seen is to uninstall the Mobile Me Control Panel. That seems to have helped some people with the DLL issue.
Whether or not that will help with connecting to the iTunes Store I don't know. If that's come up only since the update, are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? Some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure. If you have Norton, you can find instructions for that utility on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Regards.

Similar Messages

  • Error message after installing latest update

    Since installing latest update 11.0.2.26, I am receiving error message:   An unknown error occurred (-42110)
    Itunes does work, however, when I close this message down.
    Can anything be done?  What does it mean?  Am I better off just holding out until the next update and hope it fixes itself?

    Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
    iTunes: Advanced iTunes Store troubleshooting

  • Error message after installing latest FlashPlayerPlugin

    After installing FlashPlayerPlugin_11_9_900_117.exe with the downloaded install file install_flashplayer11x32_mssd_aih.exe when I open Firefox and go to another tab I get this error message:
    The exception unknown software exception (0xc0000710) occurred in the application at location 0x.......... (this is different each time) Click OK to terminate the program.
    I do this and everything seems to work OK but I keep getting the error message each time I open Frirefox and move to different pages.
    What can I do to fix this problem?

    Hi - I've just uninstalled Flash Player 11.9 and installed archived version 11.8.800.168 as advised in your FixNow Support. At 72 years of age I find having to put things like this right on my laptop is usually most confusing,
    but it has solved the problem simply and easily!
    Thank you so much!

  • Error 2615 after installing latest Itunes version

    I just updated my Itunes upto the latest version. I imported some CD.
    Then I wanted to make a back up from whole my library.
    The system told me I needed 2 discs. I always use Dvd-RW or R.
    The first disc gave no problem at all. With the second disc I got the error 2615. I retried several times but each time the second disc fails to get burned.
    Any advised to overcome this?
    Kind regards
    Martine

    Kia Oro B Noir,
    Below the diagnostic test. As my Itunes is in Dutch and have put the english translation behind some of the information.
    Looking forward to your info to solve the burning problem. For the moment I have made a backup of the Itunes file on my external HD.
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    MEDIONPC MS-7204
    iTunes 10.1.1.4
    QuickTime 7.6.9
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod-updaterbibliotheek 10.0d2
    Cd-stuurprogramma 2.2.0.1
    Cd-stuurprogramma-DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device-stuurprogramma 1.45.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote-inzending 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes-serienummer A7327409367191E7
    Huidige gebruiker is een beheerder.(_Actual user is administrator_)
    De huidige lokale datum en tijd zijn 2011-01-03 18:33:22. (_Local time&Date_)
    De veilige modus van iTunes is niet actief. (_safe modus of Itunes is not active_)
    Door WebKit versnelde samenstelling is ingeschakeld. (_Webkit faster composition active_)
    HDCP wordt niet ondersteund. (_HDCP not supported_)
    Core Media wordt ondersteund. (_Core Media is supported_)
    Videoweergave-informatie (_Video information_)
    NVIDIA GeForce 8400 GS
    ** Informatie over externe plugins ** _Info about external plugins_
    Er zijn geen externe plugins geïnstalleerd. _No External plugins installed_
    iPodService 10.1.1.4 is actief.
    iTunesHelper 10.1.1.4 is actief.
    Mobiel Apple apparaat service 3.3.0.0 is actief.
    ** Tests cd/dvd-stations **
    LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.19.0),
    UpperFilters: incdrm (5.9.4.0), InCDPass (5.9.4.0), GEARAspiWDM (2.2.0.1),
    F: SONY DVD RW DW-Q31A, Rev LYS2
    Er bevindt zich een audio-cd in het station. (_There's an audio CD in the station_)
    12 nummers op cd gevonden, afspeeltijd 47:33 op audio-cd.
    Track 1, begintijd 00:02:00
    Track 2, begintijd 03:33:15
    Track 3, begintijd 06:38:15
    Track 4, begintijd 09:17:65
    Track 5, begintijd 13:26:50
    Track 6, begintijd 16:20:07
    Track 7, begintijd 21:24:24
    Track 8, begintijd 28:21:05
    Track 9, begintijd 31:47:73
    Track 10, begintijd 35:59:22
    Track 11, begintijd 39:50:26
    Track 12, begintijd 43:57:39
    Lezen van audio-cd geslaagd. (_reading audio cd succeed_)
    Opvragen van stationsnelheid geslaagd. (_Speed request succeed_)
    De cd-r-snelheden van het station zijn: 8 16 24 32 40.
    De cd-rw-snelheden van het station zijn: 8.
    De dvd-r-snelheden van het station zijn: 8.
    De dvd-rw-snelheden van het station zijn: 8.

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • After installing latest iTunes I began having R6034 error messages, found and tried fox of removing 5 Apple programs and reinstalling iTunes.  Now iTunes says my library cannot be accessed because it was created with a newer version of iTunes.  HELP!

    After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes.  Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes.  Need Help!!!

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • After installing latest itunes on new PC unable to login to my account in iTunes Store

    Hi all,
    I get a new PC and wanted to use it with my apple devices.
    System is Windows 7 64 bit and, after installing latest iTunes I am not able to login to iTunes (needed to authorize my new PC and use it with my devices)
    Always get the message that iTunes Store is not available at the moment.
    For instance, I tried the diagnosys tool inside itunes and everything is ok.
    Please help me...
    Clemente

    There are a number of things you could do. One would be to network the two computers and transfer your iTunes folder from one to another. Here are a few links that may help you out:
    New PC & moving iTunes library
    Copying songs over a network to use with iTunes for Windows
    iTunes: Copying music between authorised computers with iTunes for Windows
    Another way would be to use an external hard drive, the guide for using the iPod as a hard drive is a good starting point. Apart from the sections on initially setting up the iPod, the instructions are the same for copying the iTunes folder to an actual external drive. If you substitute "external hard drive" for "iPod" the process is the same: How to use your iPod to move your music to a new computer

  • HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

    After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
    22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
    in my ipod.

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • Problems to sync my computer calendar with my Iphone after installing latest Itunes download

    problems to sync my computer calendar with my Iphone after installing latest Itunes download

    When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

  • I am still getting an error message to install latest software

    I am getting an error message to install latest software, and I have already done so!

    Read Before Posting: How To Get A Useful Answer To Your Question

  • Error message after installing iTunes 8.1 plc help

    After have installed iTunes I get an error message saying: The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
    Now I've tried to creat the folder manually, but that doesn't work either
    have any of you had this problem too?
    I've tried removing it and re-installing iTunes 15 times...

    In XP, this us usually caused by a registry problem, See:
    http://support.apple.com/kb/HT1866
    Sometimes My music does not show up in TweakUI. If that happens see:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188
    But be careful it involves editing the registry.
    If iTunes installed, you may be able to work round this with a shift key start.
    Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library
    If you already have an iTunes folder containing a library, navigate to it and choose iTunes Library.itl. Otherwise create a library in My Music.
    (the shift key is the one that makes upper case letters)

  • Error message when installing quicktime/itunes

    PLease help! I continue to get this error message when trying to install quicktime HKEY_LOCAL-MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quicktim e.
    What should I do? In lamens terms please, not very computer literate.

    an error message appears saying that a program required for the installation is missing
    In the course of your troubleshooting to date, have you tried the following user tip with that one?
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I'm receiving an error message 7 (Windows error 127) while installing latest iTunes

    While installing the latest iTunes i'm receiving a message Error 7 (Windows error 127) please reinstall iTunes.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HT1926 Problems synchronizing iPod touch after installing latest iTunes update

    After having installed the latest iTunes update I can't sync my iPod touch with iTunes anymore. Error message reads: Attempting to copy to the disk "Acer" failed. The device is not connected." I already re-installed iTunes completely. Another error message says: "iTunes could not back up the iPod because the iPod is disconnected". But the iPod was connected. What can I do?

    Temporarily disable any security software on the computer.

  • Iphone won't connect after installing latest itunes

    After installing the latest version of iTunes and plugging in my iphone I received the error message "Iphone cannot be used because the proper software is not installed." I've already tried removing and re-installing the program. Not sure what else I can try to get this working.  I'm running windows vista.

    Hi Neodoc,
    Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    I hope this helps,   
    -Joe

Maybe you are looking for

  • Data Grid Display child Class data

    Hi,    I have  2 Action Script class binded to remote java class Class 1 package hmil.setup.model import hmil.com.general.model.Employee; [Bindable] [RemoteClass(alias="hmil.setup.model.Area")] public class Area public function Area() public var ARMS

  • Organising photos in photoshop elements 11

    I am new to the process. I have just downloaded hundreds of photos in their new files. Whe opening up it suggests I should do a back up. If I follow that procedure, the programme goes on a search in my laptop finding certain photos. Is this necessary

  • Genre Shuffle on iPod Video 60GB

    Does anyone know how to enable the iPod Video 60GB to shuffle within a genre? iPod Video 60GB   Windows XP Pro  

  • FieldPoint automation project

    I use LabVIEW 7.1 and NI FieldPoint devices (FP-1000) for educational purposes. I want to control a automation unit which has got 6 digital input(DI) and 5 digital output(DO). I used the sequence structure, but actually I am not sure the solution whe

  • Photos won't print

    I'm using PM 7.0.  I've placed several photos in the document, but none of them print.  They show on the screen but print with an 'X' in the box.  How can I correct this?