Error message after installing NICAN 2.1.3 driver
Sorry for this second message but I wanted to translate it in english which seems to be the common language on this forum.
After installation of Nican driver, shuting down computer, insertion of NI serie 1 PCI card, and turning ON computer, windows try to install NI driver but fail to install it completely.
I've an message saying that "an error occured during the installation. Specified file has not been found"
If clic on Terminate, windows try again to install the NI driver and fails again.
strangely, MAX autotest pass succesfully, and my application works correctly with NI CARD.
How could I complete installation in order to not having constantly the popup saying that installation failed ?
This sounds like a registry problem. Some times a deinstallation or upgrade of NI drivers deletes a special registry key called RunOnce.
The result is the problem you wrote about.
Check in your registry for the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
If you could not find the RunOnce key, you have to create this one.
good luck
Similar Messages
-
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Error message after installing external zip drive
After installing a replacement zip drive (and accompanying software from CD), I'm confronted with a periodic error message advising that hardware has not been closed properly disk ejected prior to removal? I'm not removing anything--the zip disk is remaining in the external drive. I've turned off all power, rebooted and reinserted USB connections and the error message keeps coming up periodically. Iomega web site isn't much help. An suggestions, please. Thanks.
Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying! -
Help! Still get error message after installing new hard drive
The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying! -
Error Message after installing Photoshop & Illustrator (CS2) on new iMac
When I launch Illustrator or Photoshop (both CS2) on my new iMac 2.8 GHz, I get the error message: "Connection Failed. server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again."
I click OK and they open, but this behavior is getting OLD. I've uninstalled and re-installed and I continue to get the error every time I open these applications. It only happens with Illustrator and Photoshop. I'm in the process of transferring all my files and apps from my old G4 which is connected via ethernet. I've de-activated and removed the old copies on the G4. Does anyone know what is causing this error message and how I can remedy the situation? Thanks for your help.
(24" 2.*GHz Core 2 Duo iMac / OS 10.5.6 / 2 GB memory)I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far. -
Error message after installing 10.8.2 update
After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?
I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise.
? some launchd process calling usereventagent which then crashes
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
abort() called
terminate called throwing an exception
This is on a 2.66 GHz Quad-Core Xeon. No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times). -
Adobe reader has stopped working error message after installing reader XI on windows 7
Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader -
Error Messages after Instaling 10.6.2
After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
Thanks A Lot For Your HelpTrying to update with the latest drivers didn't do me any good.
HP has the worst software and horrible update instructions.
This is the page that purports to having the latest for snowleopard
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
HP also has this firmware update:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
There are no instructions telling me if this has or has not been included in my printer.
I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
I'm never buying another HP anything. Especially if Apple offers me a "deal" on it. -
Error Messages After Installing Leopard 2
After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
There are a number of messages like this. What shall I do?Download and install this update, even though you've already updated.
(26492) -
Error message after installing CS6
After installing CS6 from disk error message said, "Some items for the following product(s) could not be installed successfully." The message then listed five of the eight applications in CS6. I can't find any info about where to go to identify and resolve the issue. Please advise.
Check the install logs for errors and then use the below link to troubleshoot accordingly.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Installer Log Locations:
mac: /Library/Logs/Adobe/Installers/[Adobe Application name<date>].log.gz
win: c:\Program Files\CommonFiles\Adobe\Installers\[Adobe Application name<date>].log.gz -
Anyone getting this pop up error message after installing Lion?
After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?
Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.
-
Error message after installing latest FlashPlayerPlugin
After installing FlashPlayerPlugin_11_9_900_117.exe with the downloaded install file install_flashplayer11x32_mssd_aih.exe when I open Firefox and go to another tab I get this error message:
The exception unknown software exception (0xc0000710) occurred in the application at location 0x.......... (this is different each time) Click OK to terminate the program.
I do this and everything seems to work OK but I keep getting the error message each time I open Frirefox and move to different pages.
What can I do to fix this problem?Hi - I've just uninstalled Flash Player 11.9 and installed archived version 11.8.800.168 as advised in your FixNow Support. At 72 years of age I find having to put things like this right on my laptop is usually most confusing,
but it has solved the problem simply and easily!
Thank you so much! -
Error message after installing iTunes 8.1 plc help
After have installed iTunes I get an error message saying: The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
Now I've tried to creat the folder manually, but that doesn't work either
have any of you had this problem too?
I've tried removing it and re-installing iTunes 15 times...In XP, this us usually caused by a registry problem, See:
http://support.apple.com/kb/HT1866
Sometimes My music does not show up in TweakUI. If that happens see:
http://discussions.apple.com/thread.jspa?messageID=1731188�
But be careful it involves editing the registry.
If iTunes installed, you may be able to work round this with a shift key start.
Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library
If you already have an iTunes folder containing a library, navigate to it and choose iTunes Library.itl. Otherwise create a library in My Music.
(the shift key is the one that makes upper case letters) -
Error message after installing CCP
Hi Guys,
After i inatalled the CCP 2.8, i keep on having an error message saying " CCP requires internet explorer java plug-in 1.6.0_11 or above, see attached. I installed the Java 1.7 and keep on receiving the same error.
I am actually running Win 8.1 on my PC.
Could someone help me with this, please?
Thanks in advance,
Regards,
OvigoHi David,
I have followed the instruction it doesn't work, and after i uninstalled / reinstalled and at the end of the installation i got that message that i attached for the system check, which look OK, then after i disable the firewall and double check again your recommendation and i got the same error message.
Any additional comment will be greatful.
Thanks in advance.
Regards,
Ovigo -
Error Message after Installing "Proteus"
Hi Folks -
After installing of Instant Messenger "proteus" and starting of the software I got follow Error Message:
Last login: Sun Jun 11 18:00:58 on console
/Applications/Proteus.app/Contents/MacOS/Proteus; exit
Welcome to Darwin!
peter-walthers-computer:~ PeterWalther$ /Applications/Proteus.app/Contents/MacOS/Proteus; exit
Proteus(249) malloc: * vm_allocate(size=3221225472) failed (error code=3)
Proteus(249) malloc: * error: can't allocate region
Proteus(249) malloc: * set a breakpoint in szone_error to debug
Bus error
logout
[Process completed]
Can someone help me?
MacBookPro Mac OS X (10.4.6)It's entirely possible that Proteus is simply not Rosetta friendly, and it's not a universal binary. Nevertheless, you should contact the developer for support since these forums do not provide third-party software or hardware support.
There are alternative clients such as AdiumX and Fire that are universal binaries and are similar functionally to Proteus.
Maybe you are looking for
-
Download link for Android version of Firefox Mobile Beta seems to be dead
Didn't know where else to to write this: The download link on http://firefox.com/m/beta seems to be dead. I have tried both the /da and the /en-US version. I'm on Android 2.1-update1 on a Sony Ericsson X10 Mini Pro . All other downloads and apps work
-
Webutil - CLIENT_OLE2 for exporting to MS Word
I've done a lot of reading about this on the net, and have been unable to find the solution, perhaps someone on here knows. I am attempting to launch a word document and fill it with some text. A very simple small block of code (taken from an example
-
Integrate SAP BI with third party Java application
I want to display reports from SAP BI to third party java application. I have found many javadocs, but have not found any document that helps with this problem.
-
I will aprreciate any guidance on this
-
Regarding Arabic Language RDF Report
Dear All, I am working on one Arabic Report. I have changed the following in Windows XP OS, NLS Lang for Devesuitehome - "AMERICAN_AMERICA.AR8MSWIN1256" Changed the Regional & language settings. When I run the report from Report Builder the output is