Error message after iTunes upgarde
I just upgraded iTunes to 9.0.2 but now when I try to open it, I get the following error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes."
Everything worked well until I upgraded. This message is confounding since to my knowledge there is no newer version than 9.0.2???
Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.
Similar Messages
-
HELP! Error message after itunes 10.2 update + ipad will not appear on Macs
Everything was fine until I tried to update to 10.2. Error message appeared and ipad lost sync. Now ipad does not show on computer when itunes opens. Also ipad missing several apps from screen.
How/why the heck did this happen????See this support document for error codes. Resolve iOS update and restore errors - Apple Support The 39 does not appear, but there is a 37 and 40, so I would believe it is close to that.
If you are having trouble updating, you need to check this support document for that. You may need to put the device into Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
It could also be the security software on the Windows PC. Another question, is the device jailbroken? -
Error message after iTunes upgrade
The error message reads:
"The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
What does this mean?
I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
imac Mac OS X (10.4.4)Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.
-
Help - error message after iTunes update
I have a Windows 7 PC
I updated iTunes about four days ago and got an error message.
What should I do to correct this annoying issue?
AppleSyncNotifier.exe - Entry Point Not Found
The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dllMany thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…
Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
Trying to update frpm itunes 10 to itunes11, but get error message after installation
I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6. I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6. Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM. I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone. Help please
First backup your music and content.
Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
Try and install 10.7 first iPhone 4s will work with this. You can find the download here
http://support.apple.com/kb/DL1576
Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5 -
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.
Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock -
Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.
In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat -
I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R -
After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Error message after upgrading to 7.3
i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?
Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.
Maybe you are looking for
-
How can I make my Mac Book Pro print to a Panasonic KX-MB772?
How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?
-
How can I send an SMS message to a group?
I cannot seem to figure out how to add a second recipient to the SMS message. I routinely beep out messages to the 5 people I work with, I'd hate to send it out to each separately.
-
Need to display updated file on the screen
Hi, I have a requirement in which we take beginning date(say 5-May-2010) and end date(day 15-May-2010) as input and spawn a script which processes some jobs for all the dates between these two dates.Now this script writes a log for each date the jobs
-
Can anyone confirm if the E72 has the same appoint...
I'm looking at a possible upgrade - just checking to see if some of the things that really bug me about the E71 have been fixed. John K E72 user
-
Adjust white balance for multiple images at once?
Is this possible to adjust the white balance for multiple images at the same time? Or adjust the exposure for that matter?