Error message after iTunes upgrade

The error message reads:
"The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
What does this mean?
I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
imac Mac OS X (10.4.4)

Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

Similar Messages

ITunes restore error message after iphone upgrade to OS5

Since installing iphone OS5 I've been getting a message when connecting to itunes that my restore was interrupted and would I like to continue to restore from my last backup. I've tried restoring several times and I keep getting the same error message at the end of the restore. I also had trouble installing the OS5 upgrade because of an error -34 (something related to the fact that my music was compressed). How do I restore my phone so that this error does not keep appearing? It seems no data was lost.

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Error message after iTunes upgarde

I just upgraded iTunes to 9.0.2 but now when I try to open it, I get the following error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes."
Everything worked well until I upgraded. This message is confounding since to my knowledge there is no newer version than 9.0.2???

Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

How can I resolve iCal desktop application error message after Yosemite upgrade?

After upgrading Yosemite on my MacBook Air, MacBook Pro and iMac, my iCloud calendar generates an error message: "The server is currently unreachable or the connection was blocked."
I am able to create and edit my iCloud calendar events on my iPad, my iPhone, and any browser by signing into iCloud.com.
All other services such as Mail, reminders, keychain, and so on continue to work normally.
Other services like Google's Calendar continue to work seamlessly across all mobile devices, web browsers, and the iCal desktop applications.
I have logged out of iCloud in System Preferences and then logged back, but that did not resolve the issue.
This is concerning since I am unable to add, edit, or delete events in the iCal desktop software on my computers.
Any help welcome!

Found my solution!
When logging back into iCloud in System Preferences, I received an error message that my (iCloud) account could not verify the "identity" of the "p03-caldev.icloud.com" account.
I was required to "trust" an Entrust.net Secure Server Certification Authority certificate to remove the error message.
Everything now synchronizes across iCal on my computers and my mobile devices/icloud.com.

HELP! Error message after itunes 10.2 update + ipad will not appear on Macs

Everything was fine until I tried to update to 10.2. Error message appeared and ipad lost sync. Now ipad does not show on computer when itunes opens. Also ipad missing several apps from screen.
How/why the heck did this happen????

See this support document for error codes. Resolve iOS update and restore errors - Apple Support The 39 does not appear, but there is a 37 and 40, so I would believe it is close to that.
If you are having trouble updating, you need to check this support document for that. You may need to put the device into Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
It could also be the security software on the Windows PC. Another question, is the device jailbroken?

Error message after kdelibs upgrade

Hello, I hope this is the right forum for this
I ran "pacman -Su" today and it upgraded my kdelibs...
now each time I try to leave konqueror settings I get the error :
There was an error loading the module.
The diagnostics is:
Library files for "libkcm_crypto.la" not found in paths
Possible reasons:
An error occurred during your last KDE upgrade leaving an orphaned control module
You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager.
It doesn't affect so far anything else I've seen....
Thank you

kdelibs is rebuilt because of the really-not-so-funny update of openssl ... and now i try to reconstruct what else changed in kde to solve it
thanx a lot for this posting
the file it mentioned is not existend in the vanilla arch, so another kde-pkg has to be rebuilt too (besides kdelibs and kdenetwork that is building right now the 2nd time)
please be patient, i work on this
EDIT:
kdebase is rebuilt ... and available in about a hour ... it should solve this (it works for me on a uptodate arch installation)

Help - error message after iTunes update

I have a Windows 7 PC
I updated iTunes about four days ago and got an error message.
What should I do to correct this annoying issue?
AppleSyncNotifier.exe - Entry Point Not Found
The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dll

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Help with printer driver error message after Yosemite upgrade

Hi, I have a MacBook Air and just upgraded to OS X Yosemite Version 10.10. Following the upgrade, I am not longer able to print wirelessly at university. When I tried to reinstall the printer drivers, I got the following error message "The file /Volumes/InstallLibraryPrinter/.drivers/bizhub_C364_101.pkg does not exist". I do have access to IT support, but they were stumped by this error too. Do you have any suggestions for how to fix this, so that I can print again? Thank you for your assistance.

Re: Can not print in Preview app
may help - it shows where to download the 10.9 drivers.

Photos are there but the videos are appearing as blank icons with an error message after the upgrade to Yosemite

I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration. My previous computer was slowly dying so I had backed it up although it was running Mavericks. I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons. When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear. The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
Any idea why?

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

The installation was interrupted message after iTunes upgrade

I would appreciate help with my problem. I'd like to use iTunes but it doesn't work.
Description of the problem: I was happily using iTunes for more than a year. I received a notice that a new version was available and I upgraded. When the installation was complete I received the following message:
"The installation was interrupted before iTunes could be completely installed."
iTunes is not listed in the Programs menu and there are no files at c:\program files\itunes (itunes folder is not there).
After subsequent downloads and installs, I get the same error. When I do the iTunes standard install, QuickTime is
available and works well. I went back to the previous version, but it continued to give me the same error. I found very old versions of iTunes on the web and they too had the same problem.
During the install the iTunes icon briefly appears on my desktop and then disappears. The message box indicating that the installation was interrupted occurs right after that.
I've tried to describe the problem in quite a bit of detail below to help avoid suggested fixes that have been tried and failed.
1. I have followed the steps in the KB article. Please see the details of that work below.
http://docs.info.apple.com/article.html?artnum=93976
2. I have Administrator access. I have verified that I'm part of both the Adminstrators and SERVICE groups under Impersonate a client after authentication. This process is found in the following doc:
http://docs.info.apple.com/article.html?artnum=300361
3. Windows is fully updated through the Windows Update utility. See Windows version info below.
4. I can install any other application. I use this computer for work and I can install and uninstall any other application
I try. No other known errors or problems. I've installed other applications that use Microsoft Installer and InstallShield installers without problems.
5. I tried the Quicktime standalone install and I received the notice that "The installation was interrupted..." Quicktime is now not found on the machine and there is no Quicktime files in the Program Files. During the middle of the installation, I received the following error. Error during QuickTime Standalone (7.1.0.210) install:
Error 1905.Module c:\program files\QuickTime\qtuiPanelControl.dll failed to unregister. HRESULT -2147220472 Contact your support personnel.
When I attempt to install iTunes from the standard install, Quicktime installs properly and works. It only fails during the standalone install.
6. No strange characters in the folder. There is no itunes folder so it contains no folder. The download exe is on my desktop.
7. Temp Folder emptied and machine restarted (many times)
8. Uninstall older versions - They are not listed as installed so there is nothing to uninstall. The Windows Clean Up utility does not list them so I can't use that tool to remove them. It appears that iTunes is cleaning itself up when the installation fails so there are no files. There is no iTunes folder at c:\program files\.
9. iPodService alert is not there so I don't need to delete it.
10. Redownload software - It has been downloaded many times. Each time I'm careful to permanently delete the previous install exe so it is redownloaded.
11. AntiVirus software has been disabled. I'm using McAfee VS Enterprise 8.0.0. I have also checked the AV logs to see if it has blocked an install or other event around that time - there is nothing in the AV logs to show any blocked or prevented activity. No activity at all because the software is disabled.
12. Registry - A search of "itunes" in the Registry Editor finds a lot of references. Too many to list, but most are in keys that apply to file types.
13. I have downloaded and attempted to install the Windows Installer 3.0 package from the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5FBC5470-B259-4733-A914 -A956122E08E8&displaylang=en&Hash=9PV3FS4
I'm told by a box during the install that the version I have installed is newer than the one on the website and there is no need to install it.
14. The version of iTunes that I'm trying to install right now is 6.0.4.2. I've had this problem for at least three months so I've been trying many versions before its release.
15. Other than the mentioned AV program, I don't have a third-party firewall, anti-spyware or monitoring program installed.
System:
IBM ThinkPad T42
Windows XP Pro
1 GB RAM
McAfee VirusScan Enterprise 8.0.0
Microsoft Windows XP Professional
Version: 5.1.2600
Service Pack: 2.0
Location: C:\WINDOWS
Hot Fix: KB913446
IBM T42 Windows XP Pro

It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
7.0.0.70 is the verion I just installed.
Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

HT1926 Error message during iTunes upgrading

I try to upgrade iTunes on my PC to the latest version but in the middle of the installation process a box appears asking: "do you want iTunes to make changes to your computer?". Regardless of what I press, the installation process gets interrupted with the message: "errors occurred during installation before iTunes could be configured". What goes wrong here?

Make sure you are installing iTunes from an account with Administrator privileges. If you can't get it to install then you may need to uninstall all Apple software, reboot, then try again.
tt2

IPhone 3g (16gb, black) 2.1 gives an error message after the upgrade.

Hoi,
Ik heb een T-Mobile iPhone 16gb (zwart) geupgrade van 2.0.2 naar 2.1.
Upgrade is goed gegaan, tot het moment dat ik een venster zag met de tekst "Waiting for activation. This may take some time." met de knop Dismiss.
Ik heb een tijd lang gewacht (een hele nacht), maar er gebeurd niets. ook niet na het aan klikken van de Dismiss knop.
Vervolgens vanmorgen een restore gedaan, telefoon data teruggezet vanaf backup.
Helaas met hetzelfde resultaat.
Wat is de oplossing voor dit probleem, ik heb Apple support ook gebeld, maar na het maken van de iPhone menu keuze, word ik verwezen naar T-Mobile terwijl het hun product is ?

I have talked to several iphone technical reps and received different answers in regards to this issue. I work for at&t and had my 1st customer with this issue today. When he left our store last night his phone was fine. He upgraded this morning to the 2.1.2 upgrade and that's when his phone was left crippled on the "waiting for activation" message. I was advised to have the customer reset the iphone in every different way possible. Also the customer did a restore from itunes. None of this helped and now the phone will be replaced. All of the reps I spoke with even tried to blame it on activation when his sim card was clearly working in other phones. After 3 hours of back and forth there was no answer.

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this?

Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Error message after iTunes upgrade

Similar Messages

Maybe you are looking for