Error message after kdelibs upgrade
Hello, I hope this is the right forum for this
I ran "pacman -Su" today and it upgraded my kdelibs...
now each time I try to leave konqueror settings I get the error :
There was an error loading the module.
The diagnostics is:
Library files for "libkcm_crypto.la" not found in paths
Possible reasons:
An error occurred during your last KDE upgrade leaving an orphaned control module
You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager.
It doesn't affect so far anything else I've seen....
Thank you
kdelibs is rebuilt because of the really-not-so-funny update of openssl ... and now i try to reconstruct what else changed in kde to solve it
thanx a lot for this posting
the file it mentioned is not existend in the vanilla arch, so another kde-pkg has to be rebuilt too (besides kdelibs and kdenetwork that is building right now the 2nd time)
please be patient, i work on this
EDIT:
kdebase is rebuilt ... and available in about a hour ... it should solve this (it works for me on a uptodate arch installation)
Similar Messages
-
How can I resolve iCal desktop application error message after Yosemite upgrade?
After upgrading Yosemite on my MacBook Air, MacBook Pro and iMac, my iCloud calendar generates an error message: "The server is currently unreachable or the connection was blocked."
I am able to create and edit my iCloud calendar events on my iPad, my iPhone, and any browser by signing into iCloud.com.
All other services such as Mail, reminders, keychain, and so on continue to work normally.
Other services like Google's Calendar continue to work seamlessly across all mobile devices, web browsers, and the iCal desktop applications.
I have logged out of iCloud in System Preferences and then logged back, but that did not resolve the issue.
This is concerning since I am unable to add, edit, or delete events in the iCal desktop software on my computers.
Any help welcome!Found my solution!
When logging back into iCloud in System Preferences, I received an error message that my (iCloud) account could not verify the "identity" of the "p03-caldev.icloud.com" account.
I was required to "trust" an Entrust.net Secure Server Certification Authority certificate to remove the error message.
Everything now synchronizes across iCal on my computers and my mobile devices/icloud.com. -
ITunes restore error message after iphone upgrade to OS5
Since installing iphone OS5 I've been getting a message when connecting to itunes that my restore was interrupted and would I like to continue to restore from my last backup. I've tried restoring several times and I keep getting the same error message at the end of the restore. I also had trouble installing the OS5 upgrade because of an error -34 (something related to the fact that my music was compressed). How do I restore my phone so that this error does not keep appearing? It seems no data was lost.
Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN -
Error message after iTunes upgrade
The error message reads:
"The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
What does this mean?
I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
imac Mac OS X (10.4.4)Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.
-
Help with printer driver error message after Yosemite upgrade
Hi, I have a MacBook Air and just upgraded to OS X Yosemite Version 10.10. Following the upgrade, I am not longer able to print wirelessly at university. When I tried to reinstall the printer drivers, I got the following error message "The file /Volumes/InstallLibraryPrinter/.drivers/bizhub_C364_101.pkg does not exist". I do have access to IT support, but they were stumped by this error too. Do you have any suggestions for how to fix this, so that I can print again? Thank you for your assistance.
Re: Can not print in Preview app
may help - it shows where to download the 10.9 drivers. -
I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration. My previous computer was slowly dying so I had backed it up although it was running Mavericks. I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons. When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear. The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
Any idea why?Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN -
IPhone 3g (16gb, black) 2.1 gives an error message after the upgrade.
Hoi,
Ik heb een T-Mobile iPhone 16gb (zwart) geupgrade van 2.0.2 naar 2.1.
Upgrade is goed gegaan, tot het moment dat ik een venster zag met de tekst "Waiting for activation. This may take some time." met de knop Dismiss.
Ik heb een tijd lang gewacht (een hele nacht), maar er gebeurd niets. ook niet na het aan klikken van de Dismiss knop.
Vervolgens vanmorgen een restore gedaan, telefoon data teruggezet vanaf backup.
Helaas met hetzelfde resultaat.
Wat is de oplossing voor dit probleem, ik heb Apple support ook gebeld, maar na het maken van de iPhone menu keuze, word ik verwezen naar T-Mobile terwijl het hun product is ?I have talked to several iphone technical reps and received different answers in regards to this issue. I work for at&t and had my 1st customer with this issue today. When he left our store last night his phone was fine. He upgraded this morning to the 2.1.2 upgrade and that's when his phone was left crippled on the "waiting for activation" message. I was advised to have the customer reset the iphone in every different way possible. Also the customer did a restore from itunes. None of this helped and now the phone will be replaced. All of the reps I spoke with even tried to blame it on activation when his sim card was clearly working in other phones. After 3 hours of back and forth there was no answer.
-
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition. -
Error message after upgrading to 7.3
i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?
Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution. -
Error messages after upgrading kernel (devfs to udev) [SOL]
when installing the new kernel i got a message to change my menu.lst so it changed "/dev/discs/disc0/part3" to "/dev/hda3" (and nothing else) cause of udev instead of devfs.
after rebooting i get few error messages:
[after network start]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFBRDADDR: No such device
etho0: unknwon interface: No such devicekjs wrote:I'm also having an issue after upgrading neither eth0 nor eth1 are showing up in /dev .... I think it's due to the switch from devfs to udev...
for the record - network interfaces never show up in /dev - they're not normal devices
edit: I guess I should provide some help...
ifconfig and "ifconfig -a" will list network devices (also in /proc/net somewhere). If you do not have a network device that means that your module is not properly loaded for that device.
This should have nothing to do with a devfs/udev switch and everything to do with a kernel upgrade.
Just for some more info, can you please report the output of:
· lsmod
· uname -r
· ls /lib/modules
· ifconfig -a -
I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R -
Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)
Hi! everyone,
As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
***Message starts here***
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error restart your computer. If this message appears again, follow these step:
Run system diagnostic utility supplied by your hardware manufacturer. In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.
Disable or remove any newly installed hardware or drivers....etc.
Technical information
***STOP: 0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
....................................... ........etc.....
****Message ends here****
As i stated before I've never seen this message before the upgrade. So, here is my configurations:
BEFORE
875P NEO-LSR w/ BIOS v. 2.0
2.53ghz 512 FSB CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb on channel 1 - 512mb on channel 3) (KINGSTON pc2700 module)
CURRENT
857P NEO-LSR w/BIOS v. 2.0
3.2ghz 800 FSB 512mb (L2 cache) CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
* may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU. So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
I will greatly appreciate it if someone in here who may has experienced it before or know what all this means. Please adviseThanks for your advise bejon2000.
Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week. So, can I just do the BIOS update now with the os already inplaced ??? I assum the aswer is yes, however I just wanted to confirm before I do it, you know
I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
SiSoftware Sandra
Display on Screen
Device Type : Desktop/Notebook
System Summary
Analysing...
Tip 2546 : Large memory modules should be ECC/Parity.
Finished Successfully : Yes
****Mainboard Information
Analysing...
Power / Aux Temperature : 59.0°C / 138.2°F
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Finished Successfully : Yes
***CPU & BIOS Information
Analysing...
Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
Finised Successfully : Yes
APM & ACPI Information
Analysing...
Notice 224 : SMBIOS/DMI information may be inaccurate.
Finished Successfully : Yes
PCI, AGP, CardBus Bus(es) Information
Analysing...
Finished Successfully : Yes
Video System Information
Analysing...
Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
Finished Successfully : Yes
Windows Memory Information
Analysing...
Finished Successfully : Yes
Drives Information
Analysing...
Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Tip 1821 : Removable Drive (H:) : Label (name) drive.
Finished Successfully : Yes
Ports Information
Analysing...
Warning : Communications Port (COM1) : Port in use. [5]
Finished Successfully : Yes
Keyboard Information
Analysing...
Finished Successfully : Yes
Mouse Information
Analysing...
Finished Successfully : Yes
Sound Card Information
Analysing...
Finished Successfully : Yes
Printer and Fax Information
Analysing...
Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
Finished Successfully : Yes
MCI Devices Information
Analysing...
Finished Successfully : Yes
Windows Information
Analysing...
Tip 1300 : Enter your company name or "Home" instead of "Unknown".
Finished Successfully : Yes
WinSock Information
Analysing...
Finished Successfully : Yes
Processes Information
Analysing...
Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
Finished Successfully : Yes
Modules Information
Analysing...
Finished Successfully : Yes
OLE Information
Analysing...
Finished Successfully : Yes
DirectX Information
Analysing...
Finished Successfully : Yes
Network Information
Analysing...
Finished Successfully : Yes
SCSI Information
Analysing...
Warning 2600 : WDC WD80 0JB-00CRA1 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : TOSHIBA DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : PLEXTOR DVDR PX-716A : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Finished Successfully : Yes
Font Information
Analysing...
Finished Successfully : Yes
CMOS Information
Analysing...
Finished Successfully : Yes
OpenGL Video Information
Analysing...
Finished Successfully : Yes
Services Information
Analysing...
Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
Finished Successfully : Yes
ATA/ATAPI Information
Analysing...
Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
Finished Successfully : Yes
Data Sources Information
Analysing...
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
Error : Tables/Views : No tables/views found.
Error : Procedures/Functions : No procedures/functions found.
Finished Successfully : Yes
Hardware IRQ Settings
Analysing...
Finished Successfully : Yes
DMA Settings
Analysing...
Finished Successfully : Yes
I/O Settings
Analysing...
Finished Successfully : Yes
Memory Resources
Analysing...
Finished Successfully : Yes
Plug & Play Enumerator
Analysing...
Finished Successfully : Yes
Performance Tune-up Wizard
Finished Successfully : Yes
There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
******UPDATED*****
here is the last part of the error that i described in my first post, I just saw it again right now
****STOP: 0x.......
**** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
Beginning dump of physical memory
Dumping physical memory to disk: (counting from 1 to 99 then it shut down the computer) -
I have never been able to upgrade my phone I always get an error message after it goes 2 hours on the computer someone told me I could do it wifi but I don't know where to go to start the download
Make sure you have the right system requirements before you start to update the iOS, you will need:
Apple ID (required for some features)
Internet access
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download from www.itunes.com/download) -
Trying to update frpm itunes 10 to itunes11, but get error message after installation
I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6. I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6. Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM. I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone. Help please
First backup your music and content.
Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
Try and install 10.7 first iPhone 4s will work with this. You can find the download here
http://support.apple.com/kb/DL1576
Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5 -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
Maybe you are looking for
-
My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?
-
Limit smart album to a number of pictures ? like last 100 pictures...
Hi, Using Aperture 3, is it possible to limit the amount of pictures that appear in a smart album ? A bit like what you do with a smart playlist in iTunes. So is it possible to create a smart album that says something like the last 100 pictures added
-
I have activated audit profile and configured all parameters. I have replaced profile parameter from DIR_AUDIT=/usr/sap/sid/D00/log to DIR_AUDIT=/usr/sap/secaduit after the server reboot still dir_audit is showing old path(means usr/sap/sid/d00/log)
-
Throw Exception with Severity Severe on ALBPM 5.7
Hello, Would like to know if there is a way of throwing an exception with severity severe so that the calling PAPI call will get the error back. Thank you in advance your you suggestions. Edited by: user8913595 on Mar 3, 2011 11:54 AM
-
How do I upgrade to 10.7?