Error message after latest update and backup, can't operate program at all, no customer service. LR 5.5, Windows 8.1

I updated to LR 5.5 and later restarted my computer. I didn't use the program for a few days and then when I did, it wanted to backup the catalog. I agreed and closed the program. The next time I opened it, it asked me for my region, saying it was required. When I answered, I got an error message saying it has encountered an error reading the preview cache and needs to quit. It fails to fix the error and gives the same message over and over. I can't use the program at all. Customer service has apparently been discontinued and I'm really at the end of my rope with this whole company. I don't think I've ever had a mass-release program with so many problems.

open disk utility, make sure that you're back to only 1 partition should be 'macintosh hd' unless you renamed it
do not try to use the disk, instead DL the x64 8.1 pro ISO from this link, and once it is finished, then open bca and choose all 3 options (copy iso, copy windows support and install windows)
http://getintopc.com/softwares/operating-systems/windows-8-1-download/

Similar Messages

I think my battery is fried. It gets really hot sometimes when I charge it now it won't charge at all. It froze up after the last update and I can't use it at all.

My phone froze up after last update and I can't use it at all. I think the battery is fried as well. It gets really hot sometimes when I charge it and now it won't charge at all.

Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds of holding both buttons. If still nothing try Reset while on Wall Charger, this can take about 20 seconds of holding both buttons while on Charger. If still nothing and you decide to Restore you iPhone with iTunes on computer, you may need to use DFU Mode Restore. Here are steps: Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.

Error message that my iPhone and iPad "can't be used

I have just installed the latest version of iTunes. I am getting error messages that my iPhone and iPad "can't be used because the required software is not installed". It asks me to uninstall and reinstall but I've done this and am getting the same message.
Thanks.
Sam

You have it set to automatically set the time and date. To do that it has to be able to reach out to iCloud to get the time and date and something is blocking it from being able to do so. So either need to fix the network/Internet connection or set it to not automatically set the time.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Locale Error Message After Todays Update [Solved]

I experienced an error message regarding something about cannot locale en-US.UTF8 after an update and reboot today.
I got rid of the error message by uncommenting:
en_US.UTF-8 UTF-8
en_US ISO-8859-1
in
/etc/locale.gen
Prior to fix:
$ locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
After fix:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES=C
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Didn't have time to check into this issue in much detail and would appreciate any additional info.

Additional info?
glibc has been upgraded today. You probably haven't merged the pacnew files.

Dolby Advanced Audio V2 Error Message After Lenovo Update

I received the following error message after completing a Lenovo Update: "The current Dolby audio driver version is 8.2.8000.14 and the software application expects driver version 7.2.7000.7. Please install a valid driver and software application." I have run Lenovo Update again and no updates/downloads were required. What action do I need to take to correct the problem so that Dolby Advanced Audio V2 works correctly? Thank you for your help.

'morning...
have a look at: http://forums.lenovo.com/t5/ThinkPad-Edge/E430-Dolby-Advanced-Audio-Issue/td-p/826333
even though it was originally described as an E430 problem, there are reports in the thread that uninstalling Conexant Audio from Control Panel and rebooting fixed the Dolby Audio issue.
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

TS1424 How do I clear the error message after I update my Security Information so I can purchase a song??

iTunes asked me to update my Security Information so I could purchase a song and after I answered all the questions is said there was an error in saving the changes and bounced me out. How can I purchase a song???

Hi saxxy60, I have not encountered this error before, but I have when the internet connection is lost in the middle of the download. You can try to disable any antivirus on the computer [http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/an-error-occurred-while-downloading-attachment-in/02b00230-ed67-473c-9ad8-370deac2272e?msgId=0d3d89cf-2722-43f3-b21b-2f3214e2f1d1]
You can try to get more elaborate errors if you try to reproduce the issue with an HTTP traffic capture.
*An add on [https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/ Live HTTP Headers]
*[http://www.telerik.com/download/fiddler Fiddler]
Please let us know if this helped you out!

I have OS10.6 and when I try to update I receive error message after validating packages and updates to not tke.

I have OS10.6 and when I try to upload updates I receive an error message when validating the packages. No updates take place.

Are you using Software Update? And what is the error message?
You are on 10.6.0? Why don't you download the combo updater for 10.6.8 directly from Apple and try to install it from there:
http://support.apple.com/kb/DL1399

Can't see Korean characters properly in text messages after latest update

Pretty simple, Korean characters used to work on my Q10 (being able to see them), but now after the latest update, they show up as half Chinese characters and completely garbled and unreadable.
This has basically made my Q10 useless to me, and I've moved back to my Galaxy S3. While I love my Q10 and BlackBerry, all of the bugs I've encountered has sort of made me... well, not happy.
Is there any chance this particular issue is going to get fixed?
Thanks.

Just as additional information: moving my SIM card to a different phone and recieving the exact same text works on other phones, so it's definitely the Q10 and latest update (as I never had an issue previously with it).

I receive error messages after installing Illustrator and InDesign

Before today, I spent 3 days downloading the trial programs for Design & Web Premium CS6:
Photoshop, Illustrator, InDesign, Audition, Bridge, DreamWeaver, ExtendScript Toolkit, Extension
Manager, FireWorks, Media Encoder, Muse, Prelude, Widget Browser, Flash Builder 4.7, Flash Professional and Media Encoder. (This is all through my online classes, and I do have a serial number that was sent to me, but no CDs.)
I used Adobe Application Manager to install them.
Everything downloaded and installed fine on my main computer (running Windows 7), but on my older,
slower, backup computer (running Win XP) I encountered problems.
I have DSL (the lowest speed, 1.5), Win XP (32 bit) SP2, 28.6 GB capacity hard drive.
Used space (after the downloads): 17.2 GB (61%)
Free Space: 11.4 GB (39%)
Downloading the trial on my Win XP computer gave several errors, and I had to re-install and/or update (at first it would say 'Try,' but then after that was done, some of them would say 'Update') most of the programs several times before they finally all seemed to fully download OK. For one of the programs, it gave an error saying there was not enough hard drive space. So then I deleted a few programs from my hard drive. But all the other programs gave different errors, which would say that they installed, but that there were problems, or that they could not install, etc.
But, after downloading everything, and everything seeming to be OK, when I tried to open Photoshop CS6 (trial version), it said:
Photoshop.exe - Entry Point Not Found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.
(And it had the red circle with the white "X" inside it.)
I then tried to open Illustrator, and it said:
"Illustrator.exe - Application Error
The application failed to initialize properly (0xc000001d).
Click on OK to terminate the application."
I then tried to open InDesign and it gave the same error as Illustrator.
So then I ran all my anti-virus, anti-spyware and diagnostic software to see if there were any viruses or spyware or malware found. Nothing was found except some tracking cookies.
Then I uninstalled all the Adobe software, which took a while.
Then I used Adobe Application Manager to only download Photoshop. It seemed to download and install, but finally it said, “Installation completed though some optional components fail to install correctly.” This is one of the errors I had gotten previously. When I clicked to see more info about the error, it said to either find a certain file, which I could not find because it looked like some of the files it mentioned were invisible files, or it gave another option, to download Microsoft Visual C++ 2010 Redistributable Package (x86).
So I went to Microsoft’s website and downloaded that. But when I tried to install it, it said I needed to install Windows Installer 3.1 or higher. So I went to that website and downloaded that (the downloaded installation file was called WindowsInstaller-KB893803-v2-x86.exe. So I installed that.
Then I went back and tried to install Microsoft Visual C++ 2010 Redistributable Package (x86) again (that installation file is called vcredist_x86.exe). After it extracted the file, it said, “Microsoft Visual C++ 2010 x86 Redistributable Setup: (red circle with white “X” inside) “Setup has detected that this computer does not meet the requirements to install this software. The following blocking issues must be resolved before you can install Microsoft Visual C++ 2010 x86 Redistributable Setup software package.” “Please resolve the following: A newer version of Microsoft Visual C++ 2010 Redistributable has been detected on the machine.” Then at the bottom of the error window, it said: “Please, see the Microsoft Visual Studio website for more information.” Then it only had a “Close” button.
I went to the Microsoft Visual Studio website, but I’m not sure what to do. It has an Office Developer Tools for Visual Studio 2012 (“Now you can create rich, immersive apps for Office 2013, SharePoint 2013, and Office 365.”) with a “Download Now” button, but that does not sound to me like what I need.
I saw, on one Adobe site, a suggestion to go to the Adobe Creative Cloud website and download the software from there (which I noticed also used the Adobe Application Manager). So I did that for Photoshop, and after it installed and updated, it gave me the same error: “The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.”
As of Friday March 29, I have been working on downloading and installing the software for FOUR (4) days now without success, and it is just so frustrating because it is taking so much time and effort.

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

Ipod sync is greyed out after latest update and libary was wiped

i updated the latest update...2 weeks later opened itunes my libary was gone bar itunes purchases...
now when ipod is connected if i go to file/ devices ipod isnt there eg bla blas ipod and the sync is greyed out ..
now before i updated the latest update all was fine..
ive since put my libary back as is stored on external hard drive and reset ipod and added libary back to ipod
but still the same as dicribed above.
now i connected my wifes iphone 4s to itunes went to file/devices hey presto itunes reconised it as eg wifes iphone
but dosnt do for ipod..
any ideas cheers.

Normally a greyed out Wifi is a hardware failure, but with some of the problems I've seen with the upgrade to iOS 4 on 3G phones, I'm not convinced the problem/problems aren't related to software. I have two suggestions, neither of which are guaranteed to work: 1. Restore your phone as a "new" device in itunes & not from backup. But first delete any and all .ipsw files on your computer. This will force itunes to re-download the current OS. The .ipsw file can be found here:
OS X: ~/Library/iTunes/iPhone Software Updates
XP: C:\Documents and Settingsusername\Application Data\Apple Computer\iTunes\iPhone Software Updates
7 & Vista: C:\Usersusername\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
You may have to turn on "show all hidden files" to find them.
Once done, reboot your computer, launch itunes, connect your phone & restore as "new". When finished, DO NOT SYNC, rather eject your phone & see if all is working properly. If it is, sync your content back to your phone. If not, proceed AT YOUR OWN RISK!
2. Try and downgrade to 3.1.3 from here:
http://www.felixbruns.de/iPod/firmware/
Note: Before you try this, bear in mind this is NOT endorsed by Apple & that you run the risk of making your phone inoperable.

Error 4251 After Latest Update

Hello, it seems after doing the latest update this week, I can no longer burn my playlists to a disc.
I saw some archived but never answered previous topics on this from 2010. Does anyone have any tips to correct or back out the last update?
Thank you,
Dawn

Hello Dmparker5,
Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes. I recommend reviewing the following articles for steps to troubleshoot and resolve this issue:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error Message- Changed email passwords and now can't scan to email

Changed google email accounts and now wont scan to email, error message.
How o I change or confirm passwords. It has also lost air print.

Hi @sellingsf ,
Welcome to the HP forums.
I understand that you need to update teh settings for your scan to email feature and have an Airprint issue.
I would like to help.
First you will need to gather your printers IP address.
Touch the wireless icon on the front panel of your 8600.
If it says IP no link, your printer has fallen off the network. This would be why Airprint is not working.
Once you have the printers IP address, open safari or chrome.
In the address bar type the printers IP address and press return.
This should take you to the printers Embedded Web Server (EWS).
Once at the EWS you should see the scan to email setup.
Choose the option to edit the email and type in your new password.
Save and test.
With the inability to Airprint, go into system preferences.
Then go into printers and scanners.
Select the 8600 plus and click the minus icon to remove it.
once the printer is gone, click the plus sign to add the printer again.
If you encounter any 'hiccups' or require further assistance, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

An error occurred while software update and now can't get emails either

Please Help, an error occurred while software update (unable to update) and now I can't get my emails either.

I figured it out....I had downloaded and deleted my photos. then I was able to upgrade...easy!

Help - error message after iTunes update

I have a Windows 7 PC
I updated iTunes about four days ago and got an error message.
What should I do to correct this annoying issue?
AppleSyncNotifier.exe - Entry Point Not Found
The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dll

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error message after latest update and backup, can't operate program at all, no customer service. LR 5.5, Windows 8.1

Similar Messages

Maybe you are looking for