Error message after updating to iTunes 9

I updated my iTunes to the latest version- iTunes 9. After installation, I get message: **yBrowser.exe: Entry point not found**. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library sqlite3.dll. I re-started my PC and the message came up: *iTuneHelper.exe- Entry point not found*. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library sqlite3.dll

Hi
I had this problem.
I fixed it by downloading a new version of SQLite3.dll.
Find the old one in the System32 folder replace it and re boot.
I got it from here
http://www.dll-files.com/dllindex/sqlite3.zip?0VHfQ0VFmQ
Worked for me but try at your own risk
Thanks to GSR852 from Xsellize for pointing me in the right direction.
Cheers
Mark
Message was edited by: wombatsev

Similar Messages

Window - No Disk error message after update to iTunes 7.1

I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
What is the fix?
Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
Thank you fellow consumers.
David
dell laptop Windows XP

Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
Rachyl

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

Hi there MRDLS,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

HT4623 Error message after updating iOS 6: Cannot connect to iTunes Store. Any help would be appreciated!

When I tap the App Store button or the iTunes button I get an error message: Cannot connect to iTunes Store. Can anyone please help? Please!

I just updated the iOS6 and that is when I started having problems. I get the message when I tap App Store and iTunes app. I get email messages but when I delete them they come back. I open them up but does not connect to the internet properly.

Error message after updated 3GS iPhone to iOS5.0?

I get an error message: iTunes could not connect the iPhone "iPhone" because the pairing record is missing? Anyone else run into this error when updating to 5.0?

Same problem here. After the update, all my music was gone on my iphone. I have try to sync many time and nothing happen

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

I got an error message with updating my iTunes and now its saying I need to re-install iTunes. How do I do that

When I was prompted there was an update on iTunes I did as usual and began installing the update. Something happened during that time and I got an error saying it didn't download correctly. Now when I go to open iTunes it gives me an error message and says I need to re-install the program. I'm not sure how to do that. I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc. Can anyone please give me some insight on what to do?
Thanks

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
littlered1382 wrote:
I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Error message when updating to iTunes 8.0

I have been using and upgrading iTunes on my laptop for a long time now, and have never experienced this problem before.
When updating, it begins installing, then gives me an error message saying: "The feature you are trying to use is on a network resource that is unavailabe", and asks me to browse my computer and find the location of iTunes.msi.
How do I fix this problem? Will I have to completely re-install my iTunes? I really don't want to have to re-do my entire library.

When you get this message, doing an installer file cleanup often fixes it.
Here is am method for removal, cleanup and reinstall of iTunes:
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes

-69 Error Message After Update

Has anyone else gotten the -69 error message since they downloaded the most recent update? I can't get any of my new downloads (movies or music) to transfer from the computer to my IPOD. I'm very frustrated and would appreciate any help that you can provide.

See if this trouble shooting article helps.
iTunes displays error 69 when syncing iPod.

Error message after update while creatin equipment with BAPI

Hi All,
I'm creating equipment master record with BAPI 'BAPI_EQUI_CREATE'. After commit I receive the following error message in my inbox -
Update was terminated
System ID....   ***
Client.......   ***
User.....   ***
Transaction..   Z***
Update key...   4AD49ADAF8E13020E10000000A701B19
Generated....   15.10.2009, 16:44:33
Completed....   15.10.2009, 16:44:33
Error Info...   Error while determ. loc. crcy: exchange rate type date from to
Who knows what's the reason and how can it be fixed.
Thanks in advance,
Kind Regards,
Nikolai.
Edited by: Nikolai Gurlenia on Oct 16, 2009 2:18 PM

Hi ,
Try to run the transaction and post the record manually and see how it behaves.
Contact your functional consultant and check with them if they recently made some config changes
Thanks
Ramya

Error message after updating Nokia Browser.

In my Nokia X2-02, after updating Nokia Browser, it gave me an error message: Conflicting applications, Show items?
Please fix this bug, as I have tried resetting all settings and updating the software via PC.
Any Idea?
Solved!
Go to Solution.

This is a known problem which happens sometimes: there's a new versio of browser available, but the application get corrupted during the download/installation of the app and stops working. Updating the device SW with Nokia Suite does not unfortunately fix the problem.. The only sure way to have the issue fixed would be to take the phone to a Nokia Care service point for refurbishing. http://www.nokia.com/global/support/locations/
Another possible workaround for the problem is to use e.g. Opera Mini instead of Nokia Browser. (you can install it with Nokia Suite even though the Nokia Browser on your phone is now non-working).
I have tried to push Nokia to release a new SW update for most device models which would correct the issue without the need to refurbish the device at a Care Point, but the latest conclusion was that the problem does not occur frequently enough to create such fix... Except for a few very latest devices should be getting it in near future
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Blank screen w/error message after updates

Toshiba U305-s2812 laptop was performing fine, loaded updates and things went downhill. Decided to restore to a previous date. The restore function initiated as normal, seemed to take along time to restore files so I walked away. Upon returning screen was blank with message (0xc0000135 logon.scr- application err. failed to initalize). Everything seems to load, but screen goes blank when it should go to the logon screen. After it sits for approx. 20 mins....error message appears (0xc0000135 logon.scr- application err. failed to initalize). Also, performs the same if I attempt to boot to safemode. Pointer appears and responds to mouse movement, but there is nothing on screen to point to. Any suggestions?

Satellite U305-S2812
0xc0000135 logon.scr- application err. failed to initalize
Logon.scr is that funny small drifting picture that Vista starts out with. It's in the Windows\System32 folder.
You can try going into the Recovery Environment and replacing the file. I can supply a copy of the file
Can you reach the Advanced Boot Options menu? Turn the computer on and immediately press and hold the F8 key. On the Advanced Boot Options menu, choose Repair Your Computer.
If you can't reach the RE this way, I can tell you how to get there another way, but you'd need to jump through some hoops.
It would be easier all around to restore the hard disk to its original state using Toshiba recovery media.
How would you like to proceed?
-Jerry

Error message after using new itunes 11.0.0.163

Every time after I sync & close the itunes app from the PC. I got this Error message "Apple Push has stopped working" new itunes version: 11.0.0.163. Can anyone help??

See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221

Error message after update Apple what have you done?

Apple can you fix this mess.
I get this error message now without even trying to log on to itunes "The program can't start because MSVCR80.dll is missing from your computer"
Please do a fix to fix this I unstaled and istalled again itunes but still same error message.
All I did update my iphone via the pc as it asked me to do so.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Error message after updating to iTunes 9

Similar Messages

Maybe you are looking for