Error message and crashing of LabVIEW 5 when controlling K-Teams Khepera robot

I have the gripper turret attached to K-Team's Khepera 1 Robot and use the K-Team provided LabVIEW VI's to control the arm movement or gripper. Every so often I get an error message after the VI runs and LabVIEW has to shut down.
Does anyone know why this is? I dont' know whtehr you will know the exact cause but maybe what the error meassage below means. I am using LabVIEW 5.0 and the error message is shown below and in the attached file.
Thanks
Sam
LABVIEW caused an invalid page fault in
module LABVIEW.EXE at 0137:0076cc3b.
Registers:
EAX=00000004 CS=0137 EIP=0076cc3b EFLGS=00010212
EBX=00000074 SS=013f ESP=01a6fd68 EBP=01a6fd74
ECX=00000001 DS=013f ESI=0323c498 F
S=31bf
EDX=000000f4 ES=013f EDI=00000000 GS=013f
Bytes at CS:EIP:
f3 a5 5e 5f 59 8b e5 5d c3 57 06 1e 66 8e da 66
Stack dump:
0323c498 030b5b31 00000000 01a6fee4 006b4f21 0323c498 00000000 00000004 030b5b30 00000007 0323c0bc c10745e4 01a6fdd8 bffa4633 03076ece 03076e44
Attachments:
labviewgrippererror416.bmp ‏64 KB

I'm not an expert per say but this could be a Windows corrupted hard disk fault.
Perform System Backup!!!
Empty re-cycle bins
Delete Temporary files
Run disk check
Defrag hard disc
reboot
Defrag hard disc
Rationale
A page fault is either memory or memory being paged to hard disk. An error in allocation raises this issue. I have seen it most often when the hard disk is heavily fragmented and or mis-allocation of hard disk space as a result of the aforementioned and Microsoft Word leaves temporary files around that have caused these kinds of issues.
There is a smaller possiblity that you have faulty memory but that's much less likely I would think.
Run a load of apps like Notepad with BIG files in them to cause the system to fill up and page to disk
then see if you get the same issue.

Similar Messages

Iweb 08: adobe flash player error messages and crashing when saving

Hi.   I switched not too long ago from an 08 Imac to a mid 2011 with Mountain Lion.    I brought the applications I could from the other computer, including Iweb 08.
today was the first time I tried to tweak my site with it. I opened the old file on the new computer using this method:
http://iwebfaq.org/site/iWeb_Transfer_Site.html
All seemed well at first. Then I got a slew of error messages to the effect of "Adobe® Flash® Player has stopped a potentially unsafe operation. The following local application on your computer or network: blah blah is trying to communicate with this internet-enabled loaction: blah blah blah".
My site is used to display my work in the video production field, so it's related to the various players/videos embedded.
In addition, when I tried to save after opening that first time, and any time, since, it crashes during the save.
Any ideas what's going on here?
Here're two of the pages on my site that were making iweb go nuts:
http://videoproduction.joshbass.com/Videoproduction-_ENG_Interviews.html
http://videoproduction.joshbass.com/Videoproduction-_Commercial.html
Thanks.

Whether or not you use iWeb, you may be aware that things have changed. Since you're a professional, I assume the trade must have talked about it.
I'm not a professional, but I have read about it for the past few years.
Adobe Flash is on it's way out. Especially on Mobile devices, such as my iPad, where your movies do not display.
Here's how I do it.
It started with this in Flash :
http://www.wyodor.net/_Movies/rolando/
Then made this with the <embed> code 4 years ago :
http://www.wyodor.net/Tutorials/ImageWidget/ClickMovie.html
And in a similar style, made for iPad :
http://www.wyodor.net/mfi/cultureclub/Movies.html
Then HTML5 came along and made a sample with custom code to explain it :
http://www.wyodor.net/_Demo/html5/HTML5Video.html
And with code from the Interwebs :
http://www.wyodor.net/_Demo/html5/HTML5_Zencoder.html
http://www.wyodor.net/_Movies/sublime/
And regarding the Adobe messages? It's not particular to your situation. It's a warning that you try to use Flash outside the protected area of a website.
You can either ignore it, or prevent it by making separate webpages for each flash video and then display them with an iframe in the HTML Snippet. The HTML5 demos above do that.
So the magic word is : Educate.

My project gets an error message and crashes everytime I go to render or preview on AE

I have recently starting using AE on my computer, every now and then its struggled to work but I haven't had any major issues until now.
When I try to render or preview my project I've had an error message pop up saying:
"After Effects error: crash occurred while invoking effect plug-in "Shatter".
then followed by a second message
"After Effects error: Crash in progress. Last logged message was <6492> <getdepthpinflags> <5> 32:32 bit
and finally
"After Effects can't continue: sorry, After Effects has crashed. See http://www.adobe.com/support/products/aftereffects.html for known issues. If you still can't resolve this issue, please contact Adobe Technical Support (2).
it then asks me to save and crashes.
I think it may be to do with my computer specs as it does struggle at times in other areas on AE
can someone tell me if i need to buy something like a new graphics card or something?
I don't have any knowledge when it comes to computer specs so heres a link to all the specifications for my computer: HP Support document - HP Support Center
please help me! need to have this project finished so if I need to buy something new for the computer i need to buy it straight away
thanks

How much ram do you have installed? Which OS? Your link to specs provides no details for your system.
What version of AE are you using down to the last decimal point?
We need to know something about your project. The kind of footage used, the size of the comp you are trying to render, the render settings are all critical information.

Title tool VideoFrameFactory error message and crashing

I have located a few mentions of this error among other users, but no Adobe response and no clear solution. In PP CS6, I am now getting a an error message every time I open the title tool: ../../src/VideoFrameFactory.cpp-78. About half the time it also crashes. Frustrated! I am trying to complete a two minute video and this portion is taking hours as I keep needing to open up the title tool related panels and to re-start the computer. Please help if you can.

I too have been having the same issue for weeks now.
I'm using Premiere CS6 6.0.3 creative cloud. VideoFrameFactory.cpp-78
Whenever I open a title, or make a new title, I receive the error.    Then I can do one of 2 things...
1. I can close the title, it will save, and then I can exit Premiere and restart Premiere. Upon opening a title, I will get the error message again.
2. I can open another Title (instead of closing Premiere). I will then get the same error message (videoframefactory.cpp-8), but then Premiere will crash. This is 100% occurance rate... If I receive the error, and I dont want premiere to crash, I must exit before opening another title.
I have seen this posted since 2010. Any chance of a fix? I tried various other leads... such as font re-installs, and deleting a WorkspaceConfig file. No luck with either of these.   Also tried a few iterations of Nvidia drivers, uninstall and reinstalls.
Any chance of some assistance? Has anyone else found a fix?   Every day I use the creative cloud, it feels more and more like I'm paying a monthly fee to be a beta tester...

Premiere Pro CC error message and crash

Hi All,
I am in the middle of a project and on a tight deadline. I have Premiere Pro CC and have tried the phone line for help. However, after 90 minutes on hold, I gave up and thought I'd try here.
So I have a project that was loading fine yesterday. I shut PP down last night and all was good. Today I tried to open the project and it gave me an error message that read;
[/morereel64/releases/2013.09/shared/adobe/MediaCore/MediaLayer/ImporterHost/Make/Mac/../. ./Src/Audio/AudioWaveform.cpp-173]
After that, I click "Continue" and it then tells me "Sorry, a serious error has occured..."
I have tried uninstalling All Adobe Apps, using Cloud Cleaner, deleting my preferences, creating a new project and importing the old one in, exporting an XML to reimport... Nothing is working. And now I'm panicking!
Please can someone help? Please?
I'm kinda going out of my mind...
Thanks

New projects don't seem to have this problem with 7.2, but I have a critically important older project that I can't seem to make work even after deleting Media files and letting them rebuild. I also tried importing the old project into a new one. I sent it to speedgrade then saved it as the premiere project... and as soon as I open the premiere project... there it is again. It freezes... needs to be closed, and then the project is corrupted and unuseable. I spent a few hours with an Adobe Tech controlling my computer... until we ended up with the Blue Screen of Death. I really need some answers on this.. at LEAST how to salvage a good timeline from this project and make it work with SpeedGrade. This is a feature length documentary that is very large. The project is shot in 4K, but I'm editing with HD proxy footage for all except a couple of shots that I'm using the 4k Footage. MOST of the footage on the timeline is MPEG2 from a Sony F55. Some is from a Canon 1D.... and as I said.. a couple of shots are Sony XAVC 4K. HELP!

I was forced into an update and now i get constant error messages and crashes I'm missing folders and it doesn't work the same way twice.

Last week I had a pop up that said I had an update from Thunderbird. It wouldn't take no for an answer and went ahead and did the update. It updated to 12.0.1 which from what I can see is already outdated. Since it did its update it hasn't worked right and I keep getting messages of long running scripts. I have messages running in tabs across the top that I can't get rid of. It takes extra steps to get back to the inbox. I also lost 2 of my folders. I' ran AVG scan and maintenance. Malwarebytes found 2 problems that it quarantined but didn't seem to be associated with T/bird. One folder came back after that. I have another folder that is labeled NSTMP that shows 518MB of use but when I open it there is nothing there. I'm not sure if I picked up something in the last update or not. It seems it tried to do this before and I told it never to update. At this point should I just update to the latest program and see what happens? I can't seem to find a way to transfer all of the folders to a thumb drive without going one message at a time and I'd at least like to back it up. Any thoughts/ideas appreciated. Thanks Doug T

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Error Message and Crash at Startup

Every time I try to start PP I get message /ppro721/releases/2013.10/shared/adobe/MediaCore/ASL/Foundation/Make?Mc/../../Src/Directo ryRegistry.cpp-283
I unistalled and reinstalled program and updates, but no luck. Any ideas?

Have you tried Adobe chat?
Next link has a "Chat Now" button near the bottom
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do.

I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?

I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

HT204088 The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

You are not able to view purchase history on your iOS device. You may only re-download previous purchases from the iOS device.
To review your iTunes Store account's purchase history, follow the steps in this article from a computer only:
Seeing your iTunes Store purchase history and order numbers
http://support.apple.com/kb/HT2727

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.

I run windows 7/8 and lightroom 5.7 i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly. What do I need to do to fix it.

I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.

THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970

Error message and crashing of LabVIEW 5 when controlling K-Teams Khepera robot

Similar Messages

Maybe you are looking for