Error message appearing on photos after upgrade to 4.2
I just downloaded the 4.2 upgrade and now I am receiving an error message with most of my photos that says "LR has encountered an error" and "you cannot make adjustments to this photo". What's going on?
Are these camera-raws, DNGs, JPGs, or some other type of image files? The “unable to make changes” phrase sounds like LR cannot write to the files, and besides a permission problem—the files not writable, the files could be corrupt and LR doesn’t want to try writing metadata into the header of the image file if it is corrupt.
If these files are old, it may be that LR has better file-corruption checking, now, and you’re just now being alerted even though the files have been corrupt for some time, already.
If the files with issues are just newly imported, then perhaps LR4.2 is taxing the hardware in ways that it wasn’t with earlier versions, and this is causing hadware or driver failure, leading to corruption.
You can download and re-install the LR 4.1 update and see if things clear up.
Similar Messages
-
ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0
Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana -
IOS 6.0 error message upon setting up after upgrade
Any body else getting "An SSL error has occurred and secure connection to server can not be made" error message. Happening to both my iPhone 4S and iPad (III)
Typical Apple first day upgrade issues! Anybody beta test software these days?Dude, relax. There are probably millions of people trying to update their iPhones at the same time. Who cares about the error. It can be corrected. Don't want to have the issues, wait a few days.
-
Error messages appearing in CS5 after uninstalling CS2
I have Adobe CS5 for Windows. I was running out of space on my laptop, and started looking at unneeded programs to delete. I realized that although it had been years since I upgraded, I still had CS2 on the computer taking up several gigs of space, so I uninstalled each CS2 program. Since then, when I attempt to go into CS5 programs, I get error messages. For Photoshop, I get a message that says "Could not synchronize the color settings because the color settings file could not be found." When I go into Illustrator, the message is "Adobe Illustrator has detected a problem in the windows registry which needs to be corrected for Illustrator to work properly. Would you like Illustrator to correct the problem now?" No matter if I choose yes or no, the error comes back the next time I load it.
I am able to get into Indesign fine, but when I try to print to a PDF, I get this:
%%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo: CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Error accessing color profile: U.S. Web Coated (SWOP) v2
%%[ Warning: PostScript error. No PDF file produced. ] %%
Again, all of this started when I deleted an old copy of CS2. Any idea what's going on? Any help would be appreciated!Reinstall CS5. uninstalling CS2 has obviously messed with the PDf presets/ libraries.
Mylenium -
I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?
It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
Hal -
I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.
-
PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
i upgraded to Lion and now itune upgrade will not install (error message appears)
iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first. -
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
When opening the version of Iphoto i have an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto. What? If I can't open the current library using the latest version of iphoto, and I am asked to make changes the the newest version!!! I'm asked to run in circles chasing my tail...I had a new hard drive installed about 6 weeks ago. I am running MAC OS 10.5.8
What version of iPhoto do you have? If you're on 10.5 then you're not running the latest iPhoto
Any chance that the library was opened with another version?
Simplest solution will be to just restore from your back up. -
macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode. -
since update to 9.3, when I click thumbnails of photos i get an error message that original photo cannot be found. Didn't have this problem prior to upgrade to 9.3 and 9.3.1. Any thoughts?
This is the iPhoto for iOS forum. You should ask in the Mac iPhoto forum. iPhoto for is OS only on version 1.
-
I upgrade the iso 5 on iPhone 4 and when it ended a error message appear what do i do
I upgrade the iso 5 on iPhone 4 and when it ended a error message appear what do i do
A quick search of the forums or google would have revealed the answer without the need to post a vague question.
Temporarily disable any Anti-Virus and Firewall software on the computer. -
For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Navigation to another view after error message appears
Hi,
I have a requirement to enhance a the FPM component FITE_VC_RECEIPTS Receipts for Expense Report , to display the messages according to the expense type. These messages are for itemization. If an error message appears, i need to click on
enter itemization and enter to that view,itemize that particular expense type and then the error message should disappear after itemization is done.
But presently if error message appears i am unable to navigate to the itemization view as the navigation_abort is set 'X' and also the rv_response = 'CANCEL' in FITV_FPM.
Please suggest as how to enhance the component so as to recify the error messages and navigate to the itemization view.It is bit complicated to advice without seeing your source and understanding the problem.
In webdynpro i would have done something like this
enhance in the process_event method and return ev_result - defer. (failed status is equivalent to you cancel and navigation_abort ).
You can try to enhance like this and try out changing the values for navigation_abort and rv_response.
Maybe you are looking for
-
I get Terminal quit unexpectedly with the an error trace as shown below. As far as the app should be concerned it is being opened for the first time as this is a new profile and the following user preference file isn't present ~/Library/Preferences/
-
i have to compare fieldname from 2 different servers(as in newly added/deleted/length) the problem here im facing is handling huge data .. i have made an rfc for fetching fieldname from remote server n then reading on tabname n then comparing the fie
-
Health App: Basic Step Counting?
Do I need any external hardware to have my steps or runs measured in the health app? I can't seem to set anything up...
-
Hi All, Currently my Company have 3 module implemented in our production system MM, FI, HR and plan to implement new module PM. I'd like to know what technical things should I prepared for that plan. Such how much space should i reserve or somethin
-
Bridge 5.1: The operation could not be completed (Mac OS 10.8)
The operation could not be completed (Mac OS 10.8)