Error Message Appears When Attempting to Connect Ipod Touch to Macbook

The error is OxE8000001, or something similar to that (Zero for O possibly)

Have you tried here:
http://support.apple.com/kb/TS3221

Similar Messages

Error message 3014 when trying to restore ipod touch

error message 3014 when trying to restore ipod touch, i have tried everything, any suggestions?

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Error message appears when attempting to access apps = server connnection error -1.

photosmart 6510, operating on a Mac computer. Error message occurs on product screen. all network and wireless connections appear good. no new product updates available. The apps function was previously working OK until last 2 weeks

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Once that is done make sure to turn the printer off and back on and try the apps again. If you are still having trouble, try turning off your router and the printer. Turn the router back on first, and leave the printer off untill the router looks like it is stable. Once the router is stable, turn the printer on and try the apps.
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

'Configuration Error: 6' appears when attempting to open Photoshop on new Macbook

I had Photoshop CS5 installed on my previous Macbook which is now broken, however a friend of mine was able to copy it on to an external hard drive for me. I have now purchased a new Macbook, copied and installed Photoshop on to it from the external, however when I try to open it, 'Error: 6' appears, it states: 'Configuration error. Please uninstall and reinstall the product. if this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.'
How do I fix this problem? Thank you in advance.

Install Photoshop from scratch from the original medium, download or DVD.
Whether your friend "copied" Photoshop from your own broken Mac Book or from his machine (the latter would be completely illegal software piracy, by the way), that will NEVER work on your new machine.
First, the Photoshop installation places many auxiliary files outside the Photoshop folder all over the place. Copying misses a bunch of critical files.
Second, the activation of the installed copy of the activation is tied to the serial numbers on the CPU of the machine and is useless in any other machine.
I repeat: Install Photoshop from scratch from the original medium, download or DVD.

HT5654 iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

I'm getting unknown error message 0xE000065 when plugging in any ipod/iphone into itunes. Why????

I'm getting unknown error message 0xE000065 when plugging in any ipod/iphone into itunes. Why????

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

The following error message appears when I try to create a PDF in Publisher:

The following error message appears when I try to create a PDF in Publisher:
PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
I have tried update patches to no avail.
Can anyone please help?
Thank you.
Susan

Hello Michael,
My version of Publisher is 2010 and my OS is Windows 8.1.
64-bit OS x64 based processor.
I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
Thank you for taking the time to view my request.
Kind regards,
Susan

TS3694 I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB) 2.0.4 Mac to my OS X version 10.9.5 Mac computer. It cannot by synced. Help!!

I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB) 2.0.4 Mac to my OS X version 10.9.5 Mac computer. It cannot by synced. Help!!

See Corrupt iPod classic.
tt2

HT5655 Error message received when attempting to download Adobe Flash for Mac version 10.8.5. HELP!

Error message received when attemping to download Adobe Flash on MacBook Air using either Safari or Firefox.

Are you downloading directly from the Abobe site? Non-Adobe hosting sites may have corrupted or contaminated versions.
http://get.adobe.com/flashplayer/?promoid=KEWEI

Error messages I when install final cut studio on my Macbook Pro

Why am I getting error messages, I when install final cut studio on my Macbook Pro? The Mac book Pro is a 2.5 ghz 17'. The software; FC Studio is about a year old.
Boe

What error message(s) are you getting?
Also, if you don't get an answer here, you might post in the FCS discussion.

Error message appears when I turn on my computer, help please!

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
I just started and I have no idea what to do about it!
Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel. I have tried to repair it and have un-installed and re-installed
it.
Any help is much appreciated!

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when selecting emailed link but there's no problem

I upgraded to Firefox 7.0.1. Now, when I select an emailed link to a website, I always receive a General Failure error message indicating that Firefox can't reach the website. In the meantime, the thin red-light progress line appears and the website comes up fine. Thee error message appears consistently but there's rarely a problem reaching a website. Any suggestions on how to eliminate the error message?

I'm responding to my own post. I checked the error messages more carefully and found that they are Microsoft Outlook generated and not Firefox. This could still be a Firefox problem but I thought I should point this out.
Bob

Error message appear when I compile the HelloWorldImp.c in JNI tutorial

I have followed the JNI tutorial to study JNI.
When I followed 'Step 5: Create a Shared Library' to compile the HelloWorldImp.c, following error message appears:
$gcc -g -I/usr/local/java/include -I/usr/local/java/include/solaris \
HelloWorldImp.c -o libhello.so
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o: In function `_start':
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o(.text+0x18):undefined reference to `main'
collect2: ld return 1 exit status
What's the problem?

gcc was trying to link your code into a runnable application. This is the default behaviour. Hence, it was looking for main() which is the entry point in a c/c++ application. By telling gcc to compile a shared library instead, with the -shared option, the linker did not try to produce a runnable program, and hence (that two hence's now, sorry) did not look for the main() function. Therefore (this is getting too formal!), there is no need to provide a main() function in a shared library.

Error Message Appears When Attempting to Connect Ipod Touch to Macbook

Similar Messages

Maybe you are looking for