Error message appears when i start PSE 6.0 and I can't use it

the heading of the message is: PhotoshopElementsOrganizer.exe - No Disk
and the body of the message is: There is no disk in the drive. Please insert a disk into drive \Device\Harddisk4\DR4
I have no idea of where to start to fix this, and I don't know anything about a hard disk drive 4, or DR4 for that mater. Anyone have any ideas for me. Thanks in advance, Ken M.

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Similar Messages

HT201272 Keep getting error #499 when trying to download a song from an album I purchased that failed to download. Error message appears when trying to download from iTunes and the cloud. Re-starting the computer did not help.

I downloaded an album I purhcased a few days ago but one of the album's songs did not download. I received an error message, #499, for which I can get no explanation or interpretation of what error #499 even is (other than generic terms). All my efforts to re-start the download have failed. I've tried several times to download the file to no avail, tried the cloud service to no avail, and re-started the computer to no avail.
My main intention is to, of course, get the download completed. My secondary intention is to, hopefully, bring to the attention of Apple - iTunes staff, the grossly inadequate, dare I say cryptic, error message descriptions iTunes displays.
I can provide the purchase receipt number if it is required.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

The following error message appears when I try to create a PDF in Publisher:

The following error message appears when I try to create a PDF in Publisher:
PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
I have tried update patches to no avail.
Can anyone please help?
Thank you.
Susan

Hello Michael,
My version of Publisher is 2010 and my OS is Windows 8.1.
64-bit OS x64 based processor.
I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
Thank you for taking the time to view my request.
Kind regards,
Susan

The following error message came when I tried to open Firefox and install Firefox Home. "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

The following error message came when I tried to open Firefox and install Firefox Home.
"can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Error message appears when I turn on my computer, help please!

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
I just started and I have no idea what to do about it!
Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel. I have tried to repair it and have un-installed and re-installed
it.
Any help is much appreciated!

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when selecting emailed link but there's no problem

I upgraded to Firefox 7.0.1. Now, when I select an emailed link to a website, I always receive a General Failure error message indicating that Firefox can't reach the website. In the meantime, the thin red-light progress line appears and the website comes up fine. Thee error message appears consistently but there's rarely a problem reaching a website. Any suggestions on how to eliminate the error message?

I'm responding to my own post. I checked the error messages more carefully and found that they are Microsoft Outlook generated and not Firefox. This could still be a Firefox problem but I thought I should point this out.
Bob

Error message appears when attempting to access apps = server connnection error -1.

photosmart 6510, operating on a Mac computer. Error message occurs on product screen. all network and wireless connections appear good. no new product updates available. The apps function was previously working OK until last 2 weeks

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Once that is done make sure to turn the printer off and back on and try the apps again. If you are still having trouble, try turning off your router and the printer. Turn the router back on first, and leave the printer off untill the router looks like it is stable. Once the router is stable, turn the printer on and try the apps.
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error message appear when I compile the HelloWorldImp.c in JNI tutorial

I have followed the JNI tutorial to study JNI.
When I followed 'Step 5: Create a Shared Library' to compile the HelloWorldImp.c, following error message appears:
$gcc -g -I/usr/local/java/include -I/usr/local/java/include/solaris \
HelloWorldImp.c -o libhello.so
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o: In function `_start':
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o(.text+0x18):undefined reference to `main'
collect2: ld return 1 exit status
What's the problem?

gcc was trying to link your code into a runnable application. This is the default behaviour. Hence, it was looking for main() which is the entry point in a c/c++ application. By telling gcc to compile a shared library instead, with the -shared option, the linker did not try to produce a runnable program, and hence (that two hence's now, sorry) did not look for the main() function. Therefore (this is getting too formal!), there is no need to provide a main() function in a shared library.

Error message appears when lesson loads from LMS

After I successfully loaded my first lesson into Syntrio LMS
and launching the lesson for the first time, there are multiple
error messages that appear in a new IE window. At first, the
browser wouldn't load the lesson unless the pop-up blocker was
turned off, but after I turned the pop-up blocker off a new window
would open displaying different errors. It happened at the very
beginning of the lesson after clicking on the "start" button on the
first slide. Then it happened randomly when clicking on other
buttons throughout the lesson, and after every quiz question. I
have copied the errror message that is being displayed.
error=0
error_text=Successful
aicc_data=[core]
STUDENT_NAME=Jarred Grant
STUDENT_ID=400
Lesson_Location=
credit=N
version=3.0
score=0
time=00:00:00
This would display while taking the quiz at the end of the
lesson:
error=0
error_text=Successful
version=2.1
Our tech support at Syntrio said it's an error with the
Captivate settings, but after going through and checking the
reporting options, it seems to be set correctly. If anybody has
encountered this error before, please provide any insight as to
what I am missing here. It is my first time building an eLearning
project so any and all help is greatly appreciated.

jarredg,
The reason you are seeing those new browser windows, is
because your
Captivate content is not hosted in the same domain as your
LMS. There are
security restrictions in the Flash Player that prevent
HTTP-POST from
occuring from a Flash file to [in this case] an LMS that
resides on a
different domain. The issue (and potential solutions) are
described here:
http://www.adobe.com/devnet/captivate/articles/output_aicc_04.html#cdc
Regards,
Andrew

Error message appears when downloading bought videos.

There is an error message that appears right when i click to download the movie. It says There is a problem downloading "movie". The disk your attempting to use is full. Please delete some files or empty recycle bin. I emptied recycle bin and is still not letting me download it. Please help.

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Why does this error message appear when opening Ffox?

ent returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED) [nsIFileInputStream.init]" nsresult: "0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)" location: "JS frame :: chrome://xdmdownloadmgr/content/overlay.js :: anonymous :: line 110" data: no]
This just started to happen today! Ffox does not open until i click "OK" in box w/error message listed above. This box appears at top left of desktop. A 2-step process that is aggravating.

yup happens on all of the Apple Discussion from my testing.
I think it has to do with the WWDC Apple site redesign. Notice how there are the new grey buttons at the top? But when you go to the Login page you see the old purple and white (which I prefer, but that's another topic). I think that the login page(s?) haven't been updated and that's causing problems.

An error message appears when i open itunes and itunes closes. wat to do??

when i try to open itunes, the error message "Itunes has encountered a problem and needs to close" pops up and it doesn't show up on the screen. what sould i do to get itunes to work?

Okay ... that rules out a bunch of possibilities.
We could be looking at a damaged CoreFP.dll here. In that case, we might be able to get things working again by swapping out the dll. We'll take a few additional explicit precautions, just in case. probably best to print out a copy of these instructions, because at one point in proceedings you won't be able to use a web browser.
Download and save a fresh copy of the iTunes installer to your hard drive. (Don't run the install on line, and don't start the installation just yet.)
http://www.apple.com/itunes/download/
Now head into your Add or Remove programs control panel. Uninstall iTunes.
Next, we'll remove leftover program files and folders.
In "My Computer", open Local Disk C: or whichever drive your program files are installed on.
Open the "Program files" folder.
Right-click on the "iTunes" folder (if it still existts) and select "Delete".
Open the "Common Files" folder.
Open the "Apple" folder.
Right-click on the "CoreFP" folder (if it still exists) and select "Delete".
Empty your Recycle Bin and restart the PC.
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start an iTunes install by doubleclicking on the iTunesSetup.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Does the iTunes reinstall go through okay? If so, does your iTunes start launching properly again?

Gneral:system error message appears when I try to ...

when try to open any music songs I put in N95 8g even that songs come with N95 8g this message appear >>gneral:system error
what I can do??

Hi tito_6646,
Just saw this thread. You can try to perform a restore to factory default (I believe this is what lupos0_1 meant), which should be available under the Menu, Tools, Settings, Phone, General, Orig. phone settings.
If this doesn't help, you can try and format your N95 8GB. This can be done via the following steps:
1. Off your N95 8GB.
2. Press the buttons *, 3 and the call.
3. While holding the above buttons, power on your N95 8GB.
4. Do not release the buttons until you see the message "Formatting". (Note that I own a N80, which doesn't prompt me this message, though I read that it does on N95 8GB.)
WARNING: This method will wipe out your data and applications on your N95 8GB, so do backup your data and be prepared to reinstall your applications.
Hope this helps. Let us know.
To All: Can anyone advise if the internal 8GB will be wiped out via the Format/Hard-reset operation? In addition, anyone know on how to backup the activiation code for the Spiderman 3 movie?
Cheers.

Numerous Norton anti-virus error messages appear whenever I start my iMac.

Whenever I restart my new iMac I get approximately 10 NORTON AntiVirus Error messages which state: "Norton virus Auto-Protect could not continue. Please run Live Update or reinstall Norton Antivirus and Restart (Code: 10)." I've tried all these things and have attempted to uninstall Norton and Symantec products to no avail. In my system preferences under the category OTHER there exists a file called Norton Auto-Protect and Norton Quick Menu which I can't do anything with. How can I stop these messages from appearing every time I start my iMac? Ideally, I'd just like to get rid of Norton and Symantec.

Here is an article with a direct link to their uninstaller:
http://www.macworld.com/article/150466/2010/04/uninstall_norton.html
After you've gotten rid of it, you may want to read this:
http://www.reedcorner.net/thomas/guides/macvirus/

Error message appears when i start PSE 6.0 and I can't use it

Similar Messages

Maybe you are looking for