Error message appears when using compressor

What means this error message (it's in a French version of Compressor 4) : "Failure : Quicktime error : - 50" ?

Hi Thot, just trawling these forums looking for some info.. I noticed this.... yeah the QT error -50 comes up.. cant find a specific reason. I had this has with a job I submitted via FCPX ti Compressor.app via "send to compressor". I recall a thread somewhere in these forums that this error was a result of genuine Quicktime error whilst performing work on one or more effects in FCPX.
So I simply went in and redid the effects in FCPs. It was something simple like a cross dissolves.
In any case if you are gettingt this error from a comperssor submittion of SHARE from FCPX and you see it in compressor., it might be worth do a trial and error on your FCPX storyline.
Simply make a few test projects and try to narrow down withe effect is causing this issue.
worth a look
w
Hong Kong

Similar Messages

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

The following error message appears when I try to create a PDF in Publisher:

The following error message appears when I try to create a PDF in Publisher:
PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
I have tried update patches to no avail.
Can anyone please help?
Thank you.
Susan

Hello Michael,
My version of Publisher is 2010 and my OS is Windows 8.1.
64-bit OS x64 based processor.
I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
Thank you for taking the time to view my request.
Kind regards,
Susan

Error 1074396120 appears when using IMQA copy

error 1074396120 appears when using IMQA copy,when i used in vision its working but when i tried to execute in labview its showing error image not found and not valid image. pls help me regarding this .

Have a look
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

Error message appears when I turn on my computer, help please!

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
I just started and I have no idea what to do about it!
Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel. I have tried to repair it and have un-installed and re-installed
it.
Any help is much appreciated!

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when selecting emailed link but there's no problem

I upgraded to Firefox 7.0.1. Now, when I select an emailed link to a website, I always receive a General Failure error message indicating that Firefox can't reach the website. In the meantime, the thin red-light progress line appears and the website comes up fine. Thee error message appears consistently but there's rarely a problem reaching a website. Any suggestions on how to eliminate the error message?

I'm responding to my own post. I checked the error messages more carefully and found that they are Microsoft Outlook generated and not Firefox. This could still be a Firefox problem but I thought I should point this out.
Bob

Error message appear when I compile the HelloWorldImp.c in JNI tutorial

I have followed the JNI tutorial to study JNI.
When I followed 'Step 5: Create a Shared Library' to compile the HelloWorldImp.c, following error message appears:
$gcc -g -I/usr/local/java/include -I/usr/local/java/include/solaris \
HelloWorldImp.c -o libhello.so
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o: In function `_start':
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o(.text+0x18):undefined reference to `main'
collect2: ld return 1 exit status
What's the problem?

gcc was trying to link your code into a runnable application. This is the default behaviour. Hence, it was looking for main() which is the entry point in a c/c++ application. By telling gcc to compile a shared library instead, with the -shared option, the linker did not try to produce a runnable program, and hence (that two hence's now, sorry) did not look for the main() function. Therefore (this is getting too formal!), there is no need to provide a main() function in a shared library.

Error message appears when i start PSE 6.0 and I can't use it

the heading of the message is: PhotoshopElementsOrganizer.exe - No Disk
and the body of the message is: There is no disk in the drive. Please insert a disk into drive \Device\Harddisk4\DR4
I have no idea of where to start to fix this, and I don't know anything about a hard disk drive 4, or DR4 for that mater. Anyone have any ideas for me. Thanks in advance, Ken M.

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when downloading bought videos.

There is an error message that appears right when i click to download the movie. It says There is a problem downloading "movie". The disk your attempting to use is full. Please delete some files or empty recycle bin. I emptied recycle bin and is still not letting me download it. Please help.

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when lesson loads from LMS

After I successfully loaded my first lesson into Syntrio LMS
and launching the lesson for the first time, there are multiple
error messages that appear in a new IE window. At first, the
browser wouldn't load the lesson unless the pop-up blocker was
turned off, but after I turned the pop-up blocker off a new window
would open displaying different errors. It happened at the very
beginning of the lesson after clicking on the "start" button on the
first slide. Then it happened randomly when clicking on other
buttons throughout the lesson, and after every quiz question. I
have copied the errror message that is being displayed.
error=0
error_text=Successful
aicc_data=[core]
STUDENT_NAME=Jarred Grant
STUDENT_ID=400
Lesson_Location=
credit=N
version=3.0
score=0
time=00:00:00
This would display while taking the quiz at the end of the
lesson:
error=0
error_text=Successful
version=2.1
Our tech support at Syntrio said it's an error with the
Captivate settings, but after going through and checking the
reporting options, it seems to be set correctly. If anybody has
encountered this error before, please provide any insight as to
what I am missing here. It is my first time building an eLearning
project so any and all help is greatly appreciated.

jarredg,
The reason you are seeing those new browser windows, is
because your
Captivate content is not hosted in the same domain as your
LMS. There are
security restrictions in the Flash Player that prevent
HTTP-POST from
occuring from a Flash file to [in this case] an LMS that
resides on a
different domain. The issue (and potential solutions) are
described here:
http://www.adobe.com/devnet/captivate/articles/output_aicc_04.html#cdc
Regards,
Andrew

An error message appears when i open itunes and itunes closes. wat to do??

when i try to open itunes, the error message "Itunes has encountered a problem and needs to close" pops up and it doesn't show up on the screen. what sould i do to get itunes to work?

Okay ... that rules out a bunch of possibilities.
We could be looking at a damaged CoreFP.dll here. In that case, we might be able to get things working again by swapping out the dll. We'll take a few additional explicit precautions, just in case. probably best to print out a copy of these instructions, because at one point in proceedings you won't be able to use a web browser.
Download and save a fresh copy of the iTunes installer to your hard drive. (Don't run the install on line, and don't start the installation just yet.)
http://www.apple.com/itunes/download/
Now head into your Add or Remove programs control panel. Uninstall iTunes.
Next, we'll remove leftover program files and folders.
In "My Computer", open Local Disk C: or whichever drive your program files are installed on.
Open the "Program files" folder.
Right-click on the "iTunes" folder (if it still existts) and select "Delete".
Open the "Common Files" folder.
Open the "Apple" folder.
Right-click on the "CoreFP" folder (if it still exists) and select "Delete".
Empty your Recycle Bin and restart the PC.
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start an iTunes install by doubleclicking on the iTunesSetup.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Does the iTunes reinstall go through okay? If so, does your iTunes start launching properly again?

Internal Error message appears when I try to open Acrobat pro XI

I recently installed Acrobat pro XI on my MacBook Air running mavericks. It installs fine, but when I try to launch it I receive an 'Internal Error occurred' message. How do I resolve this?
I have uninstlled and reinstalled from my disk, and even downloaded and installed from the Adobe site. All versions install OK, but when I try to launch it I receive this very frustrating Internal error message... How do I resolve this?

Hi garnetg,
Please check the performance in the root user account and check.
Enabling and using the "root" user in Mac OS X
Regards,
Rave

Gneral:system error message appears when I try to ...

when try to open any music songs I put in N95 8g even that songs come with N95 8g this message appear >>gneral:system error
what I can do??

Hi tito_6646,
Just saw this thread. You can try to perform a restore to factory default (I believe this is what lupos0_1 meant), which should be available under the Menu, Tools, Settings, Phone, General, Orig. phone settings.
If this doesn't help, you can try and format your N95 8GB. This can be done via the following steps:
1. Off your N95 8GB.
2. Press the buttons *, 3 and the call.
3. While holding the above buttons, power on your N95 8GB.
4. Do not release the buttons until you see the message "Formatting". (Note that I own a N80, which doesn't prompt me this message, though I read that it does on N95 8GB.)
WARNING: This method will wipe out your data and applications on your N95 8GB, so do backup your data and be prepared to reinstall your applications.
Hope this helps. Let us know.
To All: Can anyone advise if the internal 8GB will be wiped out via the Format/Hard-reset operation? In addition, anyone know on how to backup the activiation code for the Spiderman 3 movie?
Cheers.

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

An error message appears when i try to sing in on my icloud controlpanel

when i'm trying to log on my ICloud controlpanel this message appears:you can not log on because of a server error
Translation of the red font:You can not log on because of a server error

What iOS version are you currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Error message appears when using compressor

Similar Messages

Maybe you are looking for