Error message at loop point of main menu...

Anyone ever get this message when building a DVD?
http://www.reflexive-cinematics.com/miscimages/errormessage.jpg
I keep getting this damn messages with Every adobe application. I was having tons of issues with encore 1.0 so I upgraded and bought 2.0. Now I'm having that error message.
Does anyone know what the problem is? And by the way, I only get that message on the main menu when it tries to loop. The menu background video is 1:00:00 ( one minute ) and the loop point is 00:07:00 ( seven seconds ) with loop amount set to forever. I've changed it to other stuff to see, but I still get the message.
I am able to burn the disc and everything works, except for the loop point at the main menu. The menu plays till it's duration and then instead of looping it ( in a DVD player ) just stops playback and ( during preview on my computer ) gives that above error message.... ' an abnormal condition has been detected. '
fyi - my computer stats are this, in case anyone was needing to know:
Pentium Prescott P4 3.0gHz
2.5 GB's of DDR SDRAM
nVidia Geforce FX5200 128MB vid card
Creative sound blaster audigy ( with live drive )
380 gig's of Hard Drive space

Well nevermind. I seem to have fixed it. I just had to build a new project and re link everything. Seems that maybe the original project got all gunked up or something. It's working fine now.

Similar Messages

  • I am trying to create an executable vi that will call out another vi and show its front panel in the executable​. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

    I am trying to create an executable vi that will call out another vi and show its front panel in the executable.  When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

    Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
    I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
    If you go down the stuff.vi route Keep us curious guys posted
    Jeff

  • Cost error message at the point of saving a Process Order

    Dear Experts,
    Raw Materials R458 and R467 are processed to produce semifinished material S229
    While creating a Process Order for material S229, at the point of saving the process order I get the following error messages:
    1 No cost element segment exists for 21501000 on 07.07.2011
    2 Cost Element Group 2950 does not exist
    At the point of saving, cost gets calculated by the system.
    Which account(s) is this cost posted to?
    Is it the ''Offsetting entry for inventory posting'' account  of the Raw materials R458 and R467? or
    Is it the ''Offsetting entry for inventory posting'' account  of the Semi material S229? or
    Is it the Cost Center to which the Resource is assigned to?
    How can I view this calculated cost value within the particular account?

    Hi,
    1. For error No cost element segment exists for 21501000 on 07.07.2011
    Can you check whether you have maintained valuation type in the accounting tab? Also have you maintained costing tab? If you have maintained then go to OBYC that is in GBB with account key VBR GL may have not maintained. Ask your FICO guy to check this.
    2. For error Cost Element Group 2950 does not exist
    Go to below link
    Cost element group does not exist. S_ALR_87013620 report
    Regards / US

  • Error message when trying to edit a menu in Photoshop.

    Hi,
    Having a horrible time with Encore. The latest niggle is with a menu I want to edit in Photoshop.
    It's a simple four button menu with a single highlight created inside Encore. It has an animated background created in the usual way. When I try to select "Edit Menu in Photoshop" I get the following error message:
    "Unable to execute script at line 0. photoshop is undefined"
    I've searched the internet, found no refernce. Updated all my CS6 apps, problem remains.
    Any help would be appreciated.

    Hello,
    That is quite unusual.  Usually both programs connect to each other accurately.  I was even able to use and older version of photoshop (i.e. cs5) and have encore cs6 link up to it.
    Is your photoshop installation in the same directory as encore?  Like "Program Files > Adobe > Encore / Photoshop"  Are you using the 32bit version of photoshop or 64bit version?  And what about Encore?
    And can you also provide a screenshot of the error?
    Thanks

  • Error message procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    I keep getting error message: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • Setting loop point on a menu

    Is it possible to set a loop point at a specific timecode on a motion menu?
    When I try to set a point or use the up and down arrows it doesn't move frame by frame, it moves 10 to 15 frames at a time.
    I am working in PAL

    As far as I know, loop points (and chapter markers) can only be placed at I-frames, which is why it moves 10-15 frames at a time. If you need to jump to a specific frame, you'll need to make sure that there's an I-frame at that frame. If you're using FCP, you can place either a chapter or compression marker and then re-export your footage. You'll need to re-encode the footage if you're not letting DVDSP do it.

  • Fade in two text bullet points on main menu

    How can I fade in two text bullet points on the main menu once the main menu appears. The main menu is designated as first play and once the bullet points fade on they stay static on the menu. They are just brief instructions and aren't buttons.
    Thanks.

    make a copy of the first menu and add in the buttons
    link first menu to second, use a time out or an invisable button to advance
    create a disolve in the menu inspector

  • Error message: procedure entry point xmlTextReaderName

    error message upon booting up:  procedure entry point xmlTextReaderName not found in dynamic link library libxml2.dll 
    When website links to a pdf, we get another error message:   Microsoft Visual C++ Runtime Library  Program:C:\ProgramFiles(X86)\InternetExplorer\iexplore.exe
    How do we fix this?
    This question was solved.
    View Solution.

    For the first issue, according to this forum thread, it sounds like you need to go to add/remove programs and uninstall MobileMe and iCloud. These programs are installed automatically when you install iTunes.
    For the second error message, you may need to reset your Internet Explorer settings. Here is a fix from Microsoft.
    I hope these fixes work for you! If not, please provide more info about your system (i.e. computer product name/number, operating system, which browser you're using, and any performance issues you're experiencing beyond just the error messages).
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • URGENT! Hide buttons til after loop point on motion menu?

    Hi,
    Is it possible to hide the buttons on a motion menu til AFTER the loop point?
    I have a menu where there is a 10 second motion graphics intro, then a loop point, then 30 seconds of slight motion graphics in the background. As it should, after 30 seconds, it loops back to the loop point and only plays the last 30 seconds again and again.
    The problem I am having is that the buttons appear on the menu at the start, which looks awful as they get in the way of the 10 second motion graphic intro.
    Is there a way to make the buttons only appear at the 10 second (loop) point?
    As a side note - I tried doing the 10 second intro on its own track, then having the track jump to the menu, but that creates a little delay that is quite noticeable.. It's not a smooth and continuous flow like the way I am doing it above.
    Thanks!!!
    Jason
    G5 Dual 2.5Ghz, iMac 17" Core2Duo 2.0ghz, G4 900Mhz, 900mhz G3 iBook   Mac OS X (10.4.7)  

    JF:
    I add the button graphics into my background movie at the loop point. Then, I create an overlay file in Photoshop and add it to the menu? It will then only activate at the loop point, which works well since that's where the text would appear in the movie?
    That's right!
    I don't know is how to add the overlay in
    Select your menu, and in the Inspector windows you'll find the Select Overlay option and navigate to your PSD overlay file.
    I think that this Basic Menu Tutorial (from Drew13's www.dvdstepbystep.com site) could help you to create a basic overlay. Just keep the background of your file WHITE and your overlays graphics BLACK.

  • DSP Error Message "Bad break point"

    I have a project that I'm burning to a Dual Layer disc, the problem is this....during the encoding a message comes up that there was a problem finding a break point for the dual layer disc to write to. It was set on "Automatic" for break point so I tried manual as well and same thing. Has anyone seen this before? Are there any suggestions as to how to solve this? Please help

    hi,
    even i use Breakpoint on the fly normally and it will work, but now i am getting this message and i am nit able to set breakpoint.
    regards,
    venkat suman.

  • Can't set a menu loop point for my buttons to come in

    because my menu loop background video has text that flies in, i need my menu buttons that correspond to that text to come in on a delay. reading my dvdsp3 book, it seems i would need to set a loop point in the menu to trick it into doing this, however i cannot set a loop point on my menu - that option is greyed out and i cannot toggle it.
    the guide i have says looping isn't possible if i add drop zones or text, but i have done neither within dvdsp3.
    any help appreciated
    thanks

    ok i think i know what happened
    i was using moving video as an asset for my buttons
    once i changed that i could set a loop.
    i guess i will edit my moving video into small "buttons" in FCP and then create the real selection buttons in DVDSP3.

  • Printing error Messages of FM

    Hi Techies ,
             i have a Function module , and it has tables 'e_t_messages' parameter and it is giving all the error messages .
    i want to print all the error messages by looping that table , can you please help me in printing those messages .
    my code is :
    CALL FUNCTION 'RSNDI_MD_ATTRIBUTES_UPDATE'
         EXPORTING
             i_iobjnm           =   'ZC_REWUI'
             i_activate_md   =   rs_c_true
             i_db_commit    =   abap_true
         IMPORTING
             e_subrc           =  lv_rc
         TABLES
             i_t_attribute     = l_t_attributes
             i_t_data           = l_t_data
             e_t_messages = l_t_messages .
    IF lv_rc <> 0 .
    LOOP at l_t_messages into l_s_messages .
        write : '??????????????????????'   .
    END LOOP.
    ENDIF.
    i expect answer as my updated code .
    update my code and fill in .
    Thanks and Kind Regards,
    Praveen Bindla..

    Hi Praveen,
    You can try to achieve this as follows:
    CALL FUNCTION 'RSNDI_MD_ATTRIBUTES_UPDATE'
         EXPORTING
             i_iobjnm           =   'ZC_REWUI'
             i_activate_md   =   rs_c_true
             i_db_commit    =   abap_true
         IMPORTING
             e_subrc           =  lv_rc
         TABLES
             i_t_attribute     = l_t_attributes
             i_t_data           = l_t_data
             e_t_messages = l_t_messages .
    IF lv_rc <> 0 .
    LOOP at l_t_messages into l_s_messages .
        write : l_s_messages-MSGTXTP  .
    END LOOP.
    ENDIF.
    Please put a break point at the loop an check whether the field MSGTXTP is containing message with all the parameters.
    Regards,
    Abijith

  • Linking to a loop point

    I'm working on a personal project and I'm making a three page menu. I have a main, chapters, and bonus features. In the menu I have a loop point set up and it works fine. I was wondering if there was a way to link to the loop point, because when I link one menu to the main menu it goes back to the main menu, and it would be nice to have it link to the loop point on that menu. Hope someone can tell me how or link me to the answer.
    Thanks

    Is this bluray?  What version of Encore?
    Some users have created a second menu - copy of the first minus the lead in motion - so that it looks like what you get with the looping point.

  • GPRM-based button with Start at Loop Point Troubles

    First of all, I'm running DVD Studio Pro 4.2.1 on OS X 10.4.11
    I'm trying to finish a project where when a video ends, it jumps back to the menu directly to the next button in order. This menu also has a loop point set in order to skip an opening animation. So I wrote the following script to accomplish this:
    1: mov GPRM 0, SPRM 8
    2: div GPRM0, 1024
    3: add GPRM0, 1
    4: jump "menu name"(Loop) [GPRM 0]
    When I simulate the disc, everything works fine. However, a burned disc fails to return to the loop point. It will start on the next button when the highlights appear at the loop point, but the menu will begin from the beginning animation, not at the loop point.
    Is there some conflict between the GPRM based button command and the start at loop point command? I did perform a test with the GPRM based button commands left out and the start at loop point function worked perfectly.
    Edit: The "GPRM 0" at the end of the script shouldn't be a link but in brackets instead... the forum changed it to a link by default.
    Message was edited by: brazzamHD

    Given lines 1, 2 and 3, it is very unlikely that GPRM0 will ever be zero...
    What your lines are saying, roughly, is:
    "find the value of the last button that was pressed on a menu, and reduce it to a simple integer we can work with. Add '1' to the button number and then jump to the loop point on the menu IF the value in GPRM0 is '1'"
    The problem is that it will never be '1' because of line 3. The lowest value it could be is '2' when you keep that line in there.
    Also, you don't specify which GPRM you are evaluating in either version of line 4 - I assume GPRM0, as that is the one you are working with in lines 1, 2 and 3.
    If you want to return to the loop point of a menu depending on the button the user previously selected being the first button then the code is this:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    Jump MenuName (Loop) If (GPRM0 = 1)
    However, you might want to simply start at the loop point of the menu but make sure that the user is on the same button they were on previoulsy, in which case the code would be:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    Jump MenuName (Loop) \[GPRM0\]
    To do this you \must make sure that you have checked the GPRM based button checkbox in the property inspector.
    If you want to go to the next logical button after the one the user was on previoulsy, then you would need to add a '1' to it. The code looks like this:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    add GPRM0, 1
    Jump MenuName (Loop) \[GPRM0\]
    Note that the bracket shapes are important... a GPRM based button jump means that you will go to a button which has a value the same as that in the specified GPRM. The square brackets signify it is this kind of move, and not a simple evaluation of true or false.

  • Error message while activating a function

    Hello guys
    I have just written a simple function and am trying to activate it.
    When I click on check button it says 'no syntax error'. However, when I click on activate button, I get the following error. Any feedback on this will be greatly appreciated.
    Error Message:
    =================================
    Function Module ZBAPI_XI
    The main program of the function "ZBAPI_XI" does not begin with
    "FUNCTION-POOL".
    =================================
    Thanks
    Ram

    Hi,
    Try this..
    GO to SE80..
    Give the function group..
    Then activate the main program..
    Thanks,
    Naren

Maybe you are looking for