Error message at teh time of doing PGI

Hi
I am trying to create OBD , at the time of doing PGI I am getting the error as shown below ,Kindly guide how to go about it .
"Date 12.02.2011 lies after the end of factory calendar TH"
Regards
Suvin

HI
I think this is because your factory calender TH has been configured till 12-02-2011. Thats why you are getting that mesage.
Goto SCAL and change the settings
regards
Prashanth

Similar Messages

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Error Message 3 Quick Time failed to install

I have tried every way I know possible to download iTunes. I have loaded Quicktime stand alone, I have loaded iTunes to my hard drive and tried to start the install from there and not the internet. I have turned off all firewalls and virus/spyware software. I continue to get Error Message 3, Quick Time failed to install. I am very frustrated with this problem as well as the run around I'm getting from Apple. I can't even update my iPod. I thought my iPod purchase was going to be great. But after the short battery life issue and now the software issue. I am starting to re-think my purchase. Does anyone have a solution to the software problem that works??? Apple even tried to blame the problem on my computer. I see from all the people that have this problem in this forum it is not my computer. Please help if you can...Thanks, M
Toshiba Qosmio F25-AV205 Windows XP Pro Also Windows Media Center

Do you use Yahoo messenger? It's probably easier to walk you through it

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

How to raise multiple error messages at a time in a BADI

Hi all,
I'm using CHECK method of BADI ME_PROCESS_PO_CUST for some validation in ME21N/ME22N. I want to raise multiple error message at a time, when user clicks on Check button or Save button. Please let me know, is there any function module for this or is there any particular procedure for this?
Thanks in Advance,
Siva Sankar.

Hi,
Raising messages from within BAdis is not a good choice and from the look of it , it appears to be causing a dump.
Look if the BAdi interface has any exceptions defined for the method, if so, raise the exception with your message like:
MESSAGE e002(sy) WITH 'Error' RAISING <badi_exception>.
Otherwise call the FM POPUP_TO_CONFIRM To show msgs to user
Regards
Kiran Sure

Error message from my time capsule

I get the following error message from my time capsule when I try to backup my HD:
There was a problem connecting to the server "XXXXX".
Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.

You have lost all network connection to the TC. This is not so unusual since Mavericks.
You have listed hardware but the more important part is OS you are running.
Have you done a restart of the TC? That often gets it going.
A full network restart in correct order is next. With everything off.. power up modem.. wait 2min.. power up TC.. wait 2min. Power up computers etc.
Still no luck. Factory reset the TC and start over.

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Error: "Message short text 26 107 does not exist"

Hi DS Expert,
We've upgraded our DS from 3.2 into 4.2.
But sometimes several jobs fail with error: "Message short text 26 107 does not exist".
This error does not occur in DS 3.2.
Please help...
Thank you.

Hi,
Such a message seems to be SAP/BI related.
check wether you had shortdumps in your connected SAP system.
In DS there are no "long/medium/short-" texts stored.

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

Cannot download itunes. error message is run time error 6034

I cannot download itunes. the error message is run time error 6034. advices to contact application support team

Try the following user tip if you're still having the 6034 issues:
Troubleshooting issues with iTunes for Windows updates

Playlist refuses to burn. Error message received every time.

Error message received every time I attempt to burn a playlist: The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.

I'm having the same problem. Did you find a solution?

Error message at teh time of doing PGI

Similar Messages

Maybe you are looking for