Error message - attributes of the user inconsistent or not defined

Hi,
We are in SRM 7.0 have created new plant and some users assigned to this plant.
However when logged into portal page, it gives the error message ' Attributes of the user inconsistent or not defined' see PPOMA_BBP.
When checked in the org structure the data entered are correct.
What could be the reason for this error message.
Rgds,
Madhan

Hi,
Please check the following in the org structure in PPOMA_BBP for the users
1. Check whether the attribute for the ITS --URL is given.
2.Check the attribute for the company code is given.
3.Check whether the Roles for the users is given
in addition go to the check tab and check if any Red mark are there.
correct those attribute.
The error is basically related to the PPOMA_BBP only
Regards
G.Ganesh Kumar

Similar Messages

I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on all my tunes and each one I select ends up with a "?"

I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error message MH 175 "The listing end is not allowed to be in the past"

Hi,
While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
thank you
regards
prahlad

Hi,
Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
Regards
GK

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I get an error message saying that the original file could not be located on about half the songs in my library. Not all but half.

I'm unable to play approx. half the songs in my library. I get an error message saying that the original file could not be located. I am asked if I want to locate the file, I click locate and get a screen with a list of confusing looking files and nothing seems to solve the problem. As is probably apparent by now I am not particularly computer literate. I don't understand why this problem occurs on only half my library.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error message pops up "The following files could not be imported because they could not be read."

Lightroom has suddenly stopped recognizing files on my camera's sd cards. An error message pops up "The following files could not be imported because they could not be read." My iphoto app can download them so why can't Lightroom?

The answer is here - about a million times over - and it's not a Lightroom problem. It's actually a Mac OS issue. You need to fix the write permissions on the destination folder for the import.

I cannot install my samsung c410w because I always receive an error message saying that the software driver is not available.

Each time I try to install it, I get an error message saying the software for the driver is not available.

The driver appears to be available on this page:
http://www.samsung.com/us/support/owners/product/SL-C410W/XAA

I purchased and downloaded a movie and when I it backed up to my computer it changed something and now when I try to watch the movie I get an error message that says "The request URL was not found on this server.? What do I need to do to correct it?

I purchased a movie and downloaded it and when I conected my I Pod to my computer, now I get a message "The requested URL was not found on this server". What do I do to fix it?

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Error message when posting invoice : Day-end closing not defined

Hi,
In our training environment we migrated from FAGLFLEXT to FMGLFLEXT and activated fund management.
Now when posting an invoice the system provides an error message: "FQ252 Day end closing not defined".
There is no configuration related to F845 but we are prevented from posting the document due to this error message.
Any idea of where this could come from and of what need to be done to prevent this from happening?
Rgds
Sophie

Hi Sophie,
Can you check if you have entries in either PSO43 or PSO43USER tables (can be accessed via F8O2 transaction)?
Regards,
Eli

HT4061 I had purchased two movies and several iTunes music and since installing the updated ios6, I am unable to view the movies. It keeps send an error message stating that "the request URL was not found on the server" also the music purchased wont play.

As with the music, it just scrolls rapidly through my play list nut not playing any songs.....

I've had the same problems -- latest version of Mac OS and iTunes. Content plays on my iPhone, but I get the grey screen and message telling me to authorize. I even deauthorized the computer and reauthorized it to no avail.
And it is the right apple account.

The attributes of the user are inconsistent or not defined. See PPOMA_BBP

Hi all,
I created a free text SC and after approval by the manager, the SC was routed to the Sourcing cockpit as I had activated sourcing for the product category that was ordered.
Now in the SOCO, when I select my SC and click on the 'Next' button, I get an error : "The attributes of the user are inconsistent or not defined. See transaction PPOMA_BBP."
I have defined the following attributes for my purchaser
Acct assgnmnt Categry --- (Cost centre)
Acct system for vendor --- (ECC logical system)
Company code --- (XXX)
Cost centre --- (XXXXX)
Del address --- (XXXXX)
Doc type in R/3 --- (ECPO)
Local currency --- (EUR)
Mov type --- (201)
System Alias --- (ECC logical system)
System alias for accounting system --- (ECC logical system)
System alias for vendor --- (ECC logical system)
User role --- (employee/op purchaser/st purchaser)
Which other attribute do I need to define? Is there something that I have missed?
Strangely it works fine if I give my user SAP_ALL profile!!
Regards

Hitesh & Velu,
I did regenerate the role and it is in green now. Still it does not work.
However I noticed that when I ran the attribute check for Purchaser's position, I got the following errors.
Application 'RFx': Assign purchaser PURCHASER1 to a purchasing organization
Message no. BBP_ATTR_CHECK151
Diagnosis
User PURCHASER1 has a purchaser's authorizations but is not assigned to any purchasing organization.
System Response
Purchaser PURCHASER1 (position S 50000015) cannot run the EBP applications RFx without encountering errors.
Procedure
Assign a purchasing organization to purchaser PURCHASER1 (position S 50000015). Select an organization unit above the purchaser and select the property 'purchasing organization' on the 'Function' tab.
I have already done the above, all org units have a function that links them to backend ECC. Why is it still prompting me with the same error?
Regards

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Error message - attributes of the user inconsistent or not defined

Similar Messages

Maybe you are looking for