Error message BL011: For object FIAA, no sub-object 100 is maintained

Hi,
When I execute asset revaluation transaction (J1AI), the system shows the following error message: For object FIAA, no sub-object 100 is maintained.
I have searched this error in OSS notes but I haven't found anything about it.
Could you help me? Thanks in advance. Regards.

Probably, the subobject 100 wasn´t created in transaction SLG0, object FIAA. By error message BL011 you´ve
to create this subobject.
Please, run the transaction SLGO, FIAA -> subobject  -> new entries -> "100 Post revaluation".

Similar Messages

  • After I downloaded Firefox 4 and I try to open Firefox, I get this error message, "plug-in object: TypeError: Components.classes[cid] is undefined". I click "OK"; Firefox opens and works just fine. Any suggestions??

    Not much to add. Before Firefox will open, I get this error message, "plug-in object: TypeError: Components.classes[cid] is undefined". I click the "OK" button; Firefox opens and I have no further problems.
    I use an Apple with OS v. 10.6.7 and had no problems until I downloaded Firefox 4.0

    That indicates you have an add-on that is not compatible with Firefox 4. For details of how to troubleshoot that see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • SMT1 creating trusted system error No authorization for object S_ADMI_FCD

    SMT1 creating trusted system gives error No authorization for object S_ADMI_FCD even after giving authorizations in both the system. Was not able find the issue by debugging.
    Thanks and appreciate your response.
    Betcy
    Moderator message: not directly related to ABAP development, please have a look in the SAP Netweaver or Security forums.
    Edited by: Thomas Zloch on Jan 26, 2012 10:37 PM

    Hi,
    Have you tried assigning authorizations to the id from which you are creating trusted system?
    If no, please do it and check.
    Also check in SU53 after getting the authorization error.
    Also check the connection between two systems in SM59.
    Cheers,
    Raja.D

  • My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

    Hi all,
    Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
    Anyway,
    I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
    Mine doesn't.
    I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
    As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
    I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
    I have had this phone for several years and it has never done this.
    It worked absolutely fine, until I loaded the latest version of iTunes it seems...
    Any suggestions?
    Many thanks

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

  • Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    This worked...found on a prior discussion:
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
    http://majorgeeks.com/download.php?det=4459
    From the link above (near the top of the page)....Under 'download locations'   click on 'download@majorgeeks'
    To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Restart your computer.
    Re-download Itunes (latest version form Itunes website) and install.  It worked!

  • Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

    I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

    Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
    There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
    If not, you must reinstall your CS4 suite.  You don't need to delete your preferences, so it should be the same as before.
    Error "Licensing has stopped working" | Mac OS
    Gene

  • Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

    trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
    I already Uninstalled and reinstalled the product and it still does not work.

    Hi,
    Try to uninstall the software again and you have to manually
    Delete the following folders:
    [Startup Disk]/Library/Application Support/Adobe/Adobe PCD
    [Startup Disk]/Library/Application Support/Adobe/caps
    [Startup Disk]/Library/Application Support/Adobe/backup
    [Startup Disk]/Library/Preferences/FLEXnet Publisher/
    [Startup Disk]/Library/Application Support/FLEXnet Publisher/
    Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
    After that try to run the cleaner tool as mentioned by kglad.
    Restart machine and then try to install again.
    *** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

  • OMB05602: An unknown Deployment error has occured for Object Type Deploymen

    I was deploying a process_flow package here in named "PF_LOAD", then the following error occured.
    OMB05602: An unknown Deployment error has occured for Object Type DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for PF_LOAD.
    Does anyone know what this error means or what possibly caused it?
    So

    Hi David
    OWB version 10.2.0.3.0
    This is what I cought from the log when tried to deploy the process flow via OMB+
    OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN_PROCESS_FLOWS'
    Action plan DEPLOY_PLAN_PROCESS_FLOWS created.
    OMBALTER DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN_PROCESS_FLOWS' ADD ACTION 'PF_LOAD_PROCESS_FLOW_PACKAGE_DEPLOY' SET PROPERTIES (OPERATION) VALUES ('REPLACE') SET REFERENCE PROCESS_FLOW_PACKAGE 'PF_LOAD'
    Action plan DEPLOY_PLAN_PROCESS_FLOWS altered.
    OMBDEPLOY DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN_PROCESS_FLOWS'
    OMB05602: An unknown Deployment error has occured for Object Type DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for PF_LOAD.
    When I viewed via the control center jobs detail window, it is not even logged there.
    Cheers
    So

  • LIV - credit memo : error message shown for unit price variances

    hi
    In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO).  Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
    thanks

    Hi,
    If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
    Is this giving you a particular problem?
    remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
    Steve B

  • Further error messages exist for this transaction

    Hello all ,
    i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external  number ranges
    please help me out how to solve this.
    Regards
    Ahmad

    Hi Mohammad,
    There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
    Thanks,
    Prem

  • SWL order Error message on monitor 'Sum of % 200.0 exceeds 100%'

    Dear all,
    i am getting the following error for shop with limit order.
    User has created A SWL PO with all identical data like vendor, Pur org, product category and only description change for 2 lines. Its showing only one PO which is in 'Error in Process' .
    How can a cart with two lines convert into a 2 line PO ?? as per standard SRM it should create 2 different PO.
    Noted that Error message in monitors reads 'Sum of %>200.0<exceeds 100%' in RZ20.
    Line 1 reset. Sent to for approval. Ran resubmission process - did not work
    Error in process. Error message in monitors 'Sum of %>200.0<exceeds 100%'>

    Hi,
    I think that the error is with the backend system which cannot handle 2 limits for one PO...
    There is an OSS note...
    Kind regards,
    Yann

  • Error - No authorization for object while viewing transformations in BI 7.0

    Folks,
    In BI 7.0, In the Data flow diagram, when I had tried to click on the transformation sybmol, system is throwing an error message No authorization for object   (authorization object ) Message no. RS_EXCEPTION250
    Do I need to request for authorization to just view transformations or is this error something different ?
    Thanks

    Did  SU53 and below is theauthorization info. Does quality system usually not have access even to display/read transformations for func people ???
    Authorization check failed
      Object Class RS   Business Information Warehouse
        Authorization Obj. S_RS_DTP   Data Warehousing Workbench - Data Transfer Process
          Authorization Field ACTVT Activity
                                                                                    03
          Authorization Field RSONDTPSRC Source
                                                                                    DTP_46UAQF4V7BE5JR0I3HKLLC6D2
          Authorization Field RSONDTPTGT Target
                                                                                    ZSD_DEL
          Authorization Field RSSTDTPSRC Subtype of the Source
          Authorization Field RSSTDTPTGT Subtype of the Target
          Authorization Field RSTLDTPSRC Type of Source
                                                                                    DTPA
          Authorization Field RSTLDTPTGT Type of Target
                                                                                    ODSO
      User's Authorization Data xxxx
      Object Class RS         Business Information Warehouse
        Authorization Object S_RS_DTP   Data Warehousing Workbench - Data Transfer Process
          Authorizat. Z:GEFUNONC00 Data Warehousing Workbench - Data Transfer Process
            Profl. Z:GEFUNONC   Profile for role Z:GENAPO_FUNC_ONCALL
            Role Z:GENAPO_FUNC_ONCALL Generic APO Fucntional Oncall Role
            Authorization Field ACTVT Activity
                                                                                    03, 16, 23
            Authorization Field RSONDTPSRC Source
            Authorization Field RSONDTPTGT Target
            Authorization Field RSSTDTPSRC Subtype of the Source
                                                                                    ATTR, HIER, TEXT
            Authorization Field RSSTDTPTGT Subtype of the Target
                                                                                    ATTR, HIER, TEXT
            Authorization Field RSTLDTPSRC Type of Source
                                                                                    CUBE, IOBJ, ISET, ODSO, RSDS, TRCS
            Authorization Field RSTLDTPTGT Type of Target

  • Error Message when starting Object Manager on the Client

    I�ve installed sgd 4 successfully and I can start applications - except
    Array- and Objectmanager from my client.
    Here I get the message
    ErrTransportNotAvailable
    ErrTransportNotAvailable
    Standard error of script process:
    Third tier output log:
    Any ideas on this??
    I have telnet installed and enabled, but can�t log in as root yet.

    Hi Matthias
    I can't immediately explain this but the error message says that a
    connection to port 33521 on host 172.17.32.37 was refused. This usually
    means that the 33521 service (whatever this is) is not currently
    running.
    I don't recognise this as a port number that should be connected to
    during a launch, perhaps it would help if you posted the messages in
    the server error logs that occur at the time the launch is made.
    In case this is some kind of proxy service it might be worth checking
    to see if anything is running on this port. i.e. use
    netstat -an | grep 33521
    there may be something listening on the loopback interface?
    In general you should use 'ssh'. To get this working for the X11
    protocol, which is the protocol required by the object manager. You
    need to enable X11 forwarding in your /etc/ssh/ssh_config ( set
    ForwardX11 yes), and in your /etc/ssh/sshd_config ( set X11Forwarding
    yes ) on all machines connecting via ssh.
    Note. I'm assuming you are using Linux with moderate security settings
    because you are getting this problem -- if you are using something
    different the actual files you need to change may vary.
    Regards
    Barrie
    On 2005-02-17, Matthias Michl <[email protected]> wrote:
    Hello,
    how to set up SGD to launch xterm?
    I can run the objectmanager within an x-session on the SGD Server itself.
    But not within SGD.
    I can connect to the server by ssh and telnet from my Windows client
    perfectly.
    I have switched the objectmanager to connect over telnet and I get the
    message
    ErrTransport not Available
    connect (7, 172.17.32.37:33521):(111) Connection refused
    Standard error of script process:
    Third tier output log:
    Kind Regards
    Matthias
    Mel O wrote:
    It usually means that the object's connection method is not configured
    correctly. So if you have telnet enabled but the object is configured
    for SSH, you'll get this message.
    Try launching a xterm. konsole on the SGD 4 server. You can do this via
    SGD. Then as root
         $ tarantella objectmanager
    Now check that the Object and Array Manager objects have telnet selected
    as the connection method.
    Regards,
    Matthias Michl wrote:
    I�ve installed sgd 4 successfully and I can start applications - except
    Array- and Objectmanager from my client.
    Here I get the message
    ErrTransportNotAvailable
    ErrTransportNotAvailable
    Standard error of script process:
    Third tier output log:
    Any ideas on this??
    I have telnet installed and enabled, but can�t log in as root yet.

  • Error: Number range  for object RESB does not exist

    Hi
    I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as  follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
    Many thanks
    BE
    Error Msg Text:
    Number range  for object RESB does not exist
         Message no. 61501
    Diagnosis
         The system cannot create a document for an MRP element if no number
         range or interval has been maintained in Customizing of MRP or if t
         number range you have maintained is not allowed.
         Below is a list of MRP elements that are affected:
         Number range object  MRP element
         PLAF                 planned order (operative oder simulative)
         EBAN                 purchase requisition
         RESB                 dependent requirements
         MDSM                 simulative dependent reqmts (long-term plannin
         MDTB                 MRP list
    Procedure
         Check the number ranges in Customizing. If you do not have the necessa
         authorization, please get in touch with your systems administration.

    Hi
    Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
    NR Object                             MRES/DREQ
    No.                          From Number            To Number          Curr Number          Ext
    01                           0000000001               8999999999           380                    blank
    02                           9000000000               9500000000           blank                  checked
    RB                          9500000001               9999999999           blank                  checked
    Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
    thanks
    BE
    Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Maybe you are looking for