ERROR MESSAGE: Blu-Ray Object: Export File Not Found

What does this mean? I keep getting it during the build process.
Obviously the file is there and can be imported and played in AE or Premeire. It is an uncompressed 1280x720 avi at 23.97fps. My burner is an LG GGW - H20L.
Any insight on this is appreciated.

I had the same problem and changed the preset from MPEG-2 to H.264 and about 20 hours later (on a quad core machine) had a working Blu-Ray disk.

Similar Messages

Error message upon sign in stating "File Not Found (404)"?

I get this error when I sign in and I can't convert PDF. What do I do?

Hi again wjm129,
This issue is typically browser-related, so it's odd that clearing the cache and using a different browser didn't resolve the issue. What happens when you try to use ExportPDF from within Adobe Reader?
If that doesn't work, either, please get back to me about the specifics of your system, and we'll take it from there:
Operating system
Browser/version
Firewall/proxy settings (are you on a networked computer?)
Results of trying from within Adobe Reader
I look forward to hearing back from you, so we can crack this mystery.
Best,
Sara

Blue-Ray Object: "Menu"; Export File Not Found--Any Clues?

Trying to build a Blue-Ray DVD in CS3 (version 3.0.1.008). Project has motion menus and previews without errors. Upon trying to build either a disc or image I get the error
Blue-ray object: "Menu"; Export file not found.
Where "Menu" is the name of one of the sub menus in my project.
Has anyone seen this error? What is an Export file? When and how does it get created?
I have successfully burned this project to a standard DVD format.

I have the pleasure of closing out my own question. I found the following post that was the clue I needed.
http://forums.creativecow.net/readpost/145/857374
It would appear that the Blue Ray build process is a lot more sensitive to file naming. I brought into my project a menu that I used as a starting template, I edited it in Photoshop and then renamed it in Encore. During the Blue Ray build process Encore rendered the menus to the original template names, but when it needed them to build the DVD it looked for the files that had the new names I had given the menus in Encore.
Here is the fix. I exported the final menus using the Save as Template function in Encore. I then re-imported them as menus and relinked them to the DVD assets. Everything worked fine from that point on.
The interesting thing is this did not happen when building a standard DVD using the same menus.

Error while rendering: Export file not found - what to do?

Hi,
I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
Can anyone help me fix this issue? :)

Yes, I got this too:
For posterity, here is what I have found that completely fixes this error, repeatedly: Clear Encore's cache. Specifically:
Close your Encore project and exit Encore
Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
Delete the file "mlf.cache.v10"
If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore. (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
Restart Encore and load your project
...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished. I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity). Once it's all finished, I save, then immediately try to build my project again. For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one. Clearing the cache does not clear the transcodes.
I hope this helps someone. I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" How do I fix this?

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" I can burn in windows media but not itunes. I have tried to uninstall and reinstall itunes but it still does not work. Please help!!

I ran the diagnostics check and this is the message:
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 10.7.0.21
QuickTime 7.7.3
FairPlay 2.2.19
Apple Application Support 2.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00C4AB4403487290
Current user is not an administrator.
The current local date and time is 2012-12-05 23:52:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
The driver AFS.SYS is installed on the system.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

I keep getting an error message that says MSVCR80.dll is not found. What should I do?

I keep getting an error message that says MSVCR80.dll is not found. What should I do?

iTunes for Windows: Missing MSVCR80.dll

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

Error 1311....source file not found Adobe Acrobat 8.2.0

I have Vista. I keep getting installing boxes and error messages:
Error 1311. Source file not found: C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data 1.cab.
Verify file exists and that you can access it.
I cannot find that file in the set up, so it's obviously missing. I have tried uninstalling, but still get the error messages, even though the Reader is working on my PC...it's just so annoying as I am constantly cancelling installation and cancellation boxes. Can I install this file?
Thanks!
Message was edited by: Woodlandia36

"I tried to uninstall Adobe Creative Master Suite CS3. It hasn't uninstalled completely and has left traces of it still being on my system."
You could always "wipe the slate" clean.
Any and all Adobe folders would be manually deleted. (Shift+Delete to remove them from the hard drive, not send to the recycle bin)
Click Start and Run. Type regedit and hit enter.
Under HKEY_LOCAL_MACHINE\SOFTWARE delete all Adobe Folders (not just the keys, the whole folders - click once and hit Delete)
Under HKEY_CURRENT_USER\SOFTWARE do the same
Under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Change the value for the AllocateCDRoms entry to 0. (Right click and select Modify - type 0 and hit enter)
Exit the Registry Editor.
Reboot
You should not see this error anymore
Note: I only recommend this because you indicate that you have already attempted removing the entire creative suite. This will render it unfunctional if you do it. If you aren't comfortable with editing your registry, disregard these steps.

Error message with LR5 when exporting files

Hello,
I have this error at the end of all my pictures exports :
une erreur interne s'est produite : Win32 API error 2 ("Le fichier spécifié est introuvable.") when calling SehllExecuteExW from AgWorkspace.shellExecute
Nevertheless, all my pictures exports are successful.
I've re-installed LR5, but the error message is still there.
Who knows how to get rid of this error message ?
Thank you in advance for your help.

If it possible you have any plugins installed / enabled that you carried forward? One thing to check might be to disable all the plugins and do an export and see if you still get the message to rule out a plug-in causing the message instead of Lightroom.
Does it do it for all exports? Have you tried different presets?

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

Every time I install itunes i get an error message that says apple application support not found. please help!e

Hi i hope someone can help

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

"Access Connections" Error Message: ACWLIcon.exe - Entry point not found.

IBM T42 Win XP.Was runnning perfectly.
Since I downloaded and installed all the updates recommended by
System Update Version 3,
This error message comes up each time Windows Starts Up:
"ACWLIcon.exe - Entry Point Not Found
"X The Procedure entry point ?
AcSvcGetWLConnectionStatus@@YAHPAGAAVCAcWIStatus@@@Z
could be located in the dynamic link library AcSvcStub.dll "
Note That bit went blue when I pasted it here. It wasn't blue before.
@@ before and @@@ after. Significant?
PS ALSO get similar error message from ACMainGUI.exe when I try to run "Access Connections"
ACMainGUI.exe is Version 4.5.2.0 Copyright Lenovo.
How to fix please?
Yours ever,
Rick.
Message Edited by rickcw on 05-18-2008 01:59 AM

I had the same problem.
If you download 7tcx26ww.exe from Lenovo download site, it seems to work ok afterwards.
Hope this helps.

ERROR MESSAGE: Blu-Ray Object: Export File Not Found

Similar Messages

Maybe you are looking for