Error Message BRAIN:541 - Interactive Reporting

Hello,
I'm activating Interactive Reporting and other reports in CRM Webclient 7.0. Followed instructions of BB C41 but now when trying to test some reports and create new ones, it's retrieving the following error:
I:BRAIN:541 /CRMBW/CSAL_C01_Q0001
Well, this error is retrieved with almost every query, when i try to execute it. The query above is related to campaigns.
Some reports or interactive reports created with our own criteria only retrieves this error and say that no results were found.
Also, in RSRT Tcode (in Supressed Messages) the msg text for this error is:
&CAUSE&&V1&
You need to replace variable &V1& from &V2& as a boolean value. It can
therefore only have the values 0 and 1.
Entering (MWKZ = &V3&, WAERS = &V4&, ...) under <LS>Currency/Unit</> is
therefore not advisable. Only dimension = number is allowed.
&SYSTEM_RESPONSE&
The query cannot be generated and executed.
&WHAT_TO_DO&
Change the definition of the variables.&1&
&SYS_ADMIN&
Anyone knows how to solve this problem?
Search all over for this kind of messages but not many ppl with this error.
Thanks,
Regards,
João Ribeiro

Hello Susana,
We can associate manually transport requests to BI Content.
In RSA1>Transport Connection.
But we still have to define new RFC's in the new QAS/productive systems.
We first activate the data sources in BW System in development system, but when we want to transport the BI content to the target systems, these data sources should be mapped with the corresponding source systems and that's accomplished in RSA1>Tools>Conversion of Logical System Names.
In RSA1, when you activate the datasources the system asks how do you want to activate them.
If you select background there will be no transport connection.
If you select instead to activate as dialog there will be a transport connection and the transaction will start.
Hope it helps you out on your problem.
Best Regards,
João Ribeiro

Similar Messages

  • Error Message in CRM Interactive Reporting

    When launching the report "Sales Pipeline Analysis", the  error message below appears. All other reports are working fine.
    Service cannot be reached
    What has happened?
    URL http://sapcicrp.pdccons.local:8000/sap/bw/Bex call was terminated because the corresponding service is not available.
    Note
    ■ The termination occurred in system CRP with error code 403 and for the reason Forbidden.
    ■ The selected virtual host was 0 .
    Do you know the cause of this error ?
    Thanks in advance for your help !

    Hi Joaquin,
    Apparently, that service was not activated.  After activation and running the report again in the UI, I had another error message (browser error)  :
    Accessing iFrame - Error name: TypeError. Error message: Object doesn't support property or method 'SAP_BW_URL_Get'
    Other information on that screen :
    protocol ==> http
    hostname ==> sapcicrp.pdccons.local
    port ==> 8000
    path ==> /sap/bw/Bex
    parameters ==> &TEMPLATE_ID=0TPLB_0CSALMC02_Q010_1
    starturl ==> http://sapcicrp.pdccons.local:8000/sap/bw/Bex?CMD=LDOC&sap-language=E&TEMPLATE_ID=0TPLB_0CSALMC02_Q010_1&SNIPPET_OPERATIONS=
    Kind Regards,
    Els

  • APEX_040100.WWV_FLOW_API Error while creating a Interactive Report Region

    I am getting the following error while creating an Interactive report region on a page. (version - 4.1.0.00.32)
    Error Unable to create Dynamic Query page.
    ORA-04065: not executed, altered or dropped ORA-04065: not executed, altered or dropped stored procedure "APEX_040100.WWV_FLOW_API" ORA-06508: PL/SQL: could not find program unit being called: "APEX_040100.WWV_FLOW_API"
    DBA complied package but the error persists.
    Does anyone know how to debug this
    Thanks,
    Priyanka

    Hello ???,
    We are experiencing this too at login in an application. The error is caused by violating the constraint WWV_FLOW_DATA_IDX1 on columns FLOW_INSTANCE, ITEM_ID in table WWV_FLOW_DATA. So for some reason the value of an item in session state is set multiple times.
    When looking at the Access view (statement below) I see that there are multiple logins per second for a user (I have seen 12 times as maximum).
    select login_name, application, access_date, count(*)
    from WWV_FLOW_USER_ACCESS_LOG_V
    group by login_name, application, access_date
    having count(*) > 1
    order by access_date descSince this count of logins varies from 1 to 12, it looks like it is not caused by the application itself, but I also don't have a clue what the root cause is.
    Is there anyone else with more information on this issue?
    We are on APEX 4.0 and Oracle 11g and the applications have all been built in this environment, so no upgrades have been performed.
    Regards, Wouter
    Edited by: Wouter Breeuwsma on 31-mei-2012 12:05

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • When trying to import music files I get a error message that says "importer reported a generic error" I'm using windows 7, DellPC, installed premiere elements 13 2 days ago. Also when previewing and editing video,screen looks great but when I transfer to

    When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?

    chansen232
    Premiere Elements 13 on Windows 7 (presumed 64 bit).....
    1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
    The following are the instructions for the iTunes converting
    http://support.apple.com/en-us/HT1550
    If any problems with the instructions, please let me know, and I will go through them with you.
    2. How you set up the project and the export settings that you select greatly influence your end product result.
    a. What are the properties of the source media?
    b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
    (If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
    if the fields look grayed out.)
    c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
    customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
    Let us start here and then decide what next.
    Thanks.
    ATR

  • "no data found" message wrapping in interactive report

    I've looked around and can't figure out what's going on. Any help would be greatly appreciated.
    I have an interactive report which, when no data is found, displays the "no data found" message wrapping very tight. I have uploaded a screenshot of it to TinyPic for you to see what I see.
    The HTML generated around the "no data found" text is the following.
    >
    <DIV id="apexir_DATA_PANEL">
    <TABLE summary="">
    <TBODY>
    <TR>
    <TD>
    <TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
    <SPAN class="fielddata">
    No submissions were found in the system.
    </SPAN>
    </TABLE>
    </TD>
    </TR>
    </TD>
    </TR>
    </TBODY>
    </TABLE>
    </DIV>
    >
    I've looked through the HTML code that is generated for that page, but can't figure out why the words are wrapping. Any thoughts?
    Shane.

    Well, my problem is back again. It is only doing this in IE 8, not FF. When I run IE 8 in "IE 7" mode, the error message shows up fine, all on one line. I actually have two span tags now so I can have some spacing around the "no data found" message. I cannot get the "span" tags to show up in the HTML code. The software for this discussion forum seems to be filtering it out or the web browser is interpreting it when it should not. I will replace the SPAN tags with square brackets so you can see them. I also had to change "style" to "st_yle" so the software did not filter it out. It sure looks like a jumbled mess now.
    >
    <DIV id="apexir_DATA_PANEL">
    <TABLE summary="">
    <TBODY>
    <TR>
    <TD>
    <TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
    [SPAN class="fielddata"][span st_yle="padding: 15px;"]No submissions were found in the system.[span][SPAN]
    </TABLE>
    </TD>
    </TR>
    </TD>
    </TR>
    </TBODY>
    </TABLE>
    </DIV>
    >
    Since I am using an interactive report, I do not believe I have any report template I can alter to adjust how the report and/or "no data found" message are being drawn up. I do have the region of the interactive report set to "Reports Region 100% Width", but the HTML in question is not being generated by that template.
    I wonder if the problem is specific to how IE 8 might be interpreting the inside TABLE tags when it does not have any TR or TD tags within it. Any further thoughts on the matter?
    Shane.

  • Error when process an Interactive Reporting Query  - EPM 11

    Hi everyone...
    We are on EPM 11.1.2 working with Interactive Reporting
    I already submitted a SR with Oracle, with this problem that I describe on the next lines:
    If I open a document and then try to process the Query (Essbase/Oracle datasource). It throws the next error message…
    *[2018]: "Failed to acquire Data Access Service with data sources that match the specified OCE";*
    If try Again (like 1, 2, or 3 times) without close the document … then the query process responds without problem.
    If I try to process the query again (without close the document)… eventually it throws me the same error.
    Why sometimes makes the connection with the values configured and sometimes throws the error ?
    Any clue, about the origin of this problem... or some tests to discard some kind of configuration
    Note:
    - The connections are already configure in DAS, and in some time it works well
    - We have 2 DAS Services running on my environment (with the same values ) created at the beginning to work as a cluster.
    Regards
    Alberto Martínez

    Yes I did.
    I have written the code as given below. It is not working either. Can you please check my code.
    DATA:
          FM_NAME TYPE RS38L_FNAM,
          FP_DOCPARAMS      TYPE SFPDOCPARAMS,
          FP_OUTPUTPARAMS   TYPE SFPOUTPUTPARAMS.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    Get the name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
    i_name = 'ZHR_APPT'
    IMPORTING
    e_funcname = fm_name.
    Set form language and country (->form locale)
    fp_docparams-langu = 'E'.
    fp_docparams-country = 'US'.
    fp_docparams-fillable = 'X'.
    call the generated function module
    CALL FUNCTION FM_NAME
        EXPORTING
          /1BCDWB/DOCPARAMS        = FP_DOCPARAMS
          T_HR                     = wa_emphr1
       IMPORTING
        /1BCDWB/FORMOUTPUT       =
        EXCEPTIONS
          USAGE_ERROR           = 1
          SYSTEM_ERROR          = 2
          INTERNAL_ERROR           = 3.
    Thx,
    John

  • Error installation oracle Hyperion interactive reporting web client

    I can't install the web client through Hyperion workspace v11.
    My steps are:
    Workspace --> Tool --> Install --> Interactive Reporting Web Client
    Then error message is shown: unexpected status 400 (no host matches server name XXXXXX.com) returned on XXXXXX:45000/workspace*/dataaccess/../../InsightInstaller/setup.ini access check
    Please check if the server is properly configured.
    After I pressed OK, another error message is shown:
    unable to launch the installer. Please use the information bar (if available) to install activeX control or check if you have Admin right on this computer.
    I am using IIS v5.1.
    Can any friends help on this issue?
    Is there anything to configure in my IIS? or the version is too old ?
    Thank you ~!
    Jeff T

    The solution to this problem is simple and easy.
    Which port are you using to login to workspace for installing the client. I predict its 45000 port.
    Try using the 19000 port for logging into the workspace and try installing the IR web client. It works.
    Let me know if there are still any issues.

  • Error in exporting from Interactive Report to PDF format

    Hello,
    i am using APEX and from an Interactive Report i am trying to export using Download | PDF format. The table and corresponding report has only text fields. Database character set is UTF-8. Up to now i haven't been able to get a PDF file that can be open from Adobe Acrobat Reader. Every file fails opening with message like "Adobe Reader could not open filename.pdf, because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). This happens for every report i have tried up to now. If i export report in CSV format all are ok.
    Is there a known bug with PDF download of APEX?
    TIA

    See this link: http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
    FOP & Cocoon are free (just need to install the software and configure) Bi Publisher I believe works only for Standard Reports and no Interactive reports at this time.. If you have the $$ BI Publisher is worth the investment!!
    Also, it is rumored that APEX 4.0 will have the PDF generation built in as apposed to the current model where you need to bolt something on..
    Thank you,
    Tony Miller
    Webster, TX

  • Error Message in EoL/EoS Report

    currently running LMS 3.2 get the following error message when running the Eol/Eos report: under reason for failure get unable to get data from Cisco.com try again later. using the same login that is used to login to Cisco.com.

    The online version of this report is currently broken.  We have been working to fix it for a while now, but unfortunately, I do not have an ETA.  The workaround is to use the offline report mode, and download the data from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .

  • Too much errors/messages in Web Analysis reports stops workspace

    Too often workspace stops to work for the client with the following (example) messages. It seems that too much informational and error messages from reports (like a non working report link or missing member) gives the workspace client so much trouble that login off or closing the browser is the only solution. This seems not the right workaround. Anyone experiencing the same?
    Internet Explorer popup:
    Line: 2608
    char: 4
    Error: 'undefined'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp
    {next}
    Internet Explorer popup:
    Line: 2688
    char: 3
    Error: 'undefined'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp
    In a Hyperion(r)Workspace-error popupscreen:
    An error was encountered while closing all content
    Can only remove children
    Internet Explorer popup:
    Line: 1385
    Char: 4
    error: 'this.leftComp.getDataModel()'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp

    it seems that all errors are related to the migrated anaqlyzer report. In the new 931 version less characters are allowed to use than the old 71 version.
    In the main name of the reportgroup the migration just rplaces the wrong characters. But links and url insite reportgroups and reports are not changed during migration. Activating (clicking on it) such links is the main cause of the freeze.

  • Error Message when Scheduling a report in Infoview

    I have created a report in Crystal Report using the Universe.  Report is saved to the Enterprise and set up to schedule in Infoview.
    When the report is scheduled for now or any other "when" time, I receive the error message:
    "Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\tfcu-fics.reportjobserver\~tmp58860bbee30730.rpt: Unable to connect: incorrect log on parameters."
    Currently running CR Version - 11.5.0313
    BOE Version - 11.5
    On my workstation - the ODBC connection, System DSN, for crystal is using the Adaptive Server Anywhere 9.00 driver - have no issues creating the report from the Universe.
    On the server the ODBC connection, System DSN, for crystal is using the SQL Anywhere 10 driver.  Would using the SQL Anywhere 10 driver create the error message above?
    To test this I changed the workstation System DSN connection for crystal to SQL Anywhere 10 and when trying to refresh a report created from the Universe I kept receiving the ODBC Login window asking for the database password.
    Is there an issue with SQL Anywhere 10 and a Universe not holding the database username or password?

    Try This..
    1. Open the crystal client on your local machine and import that particular report.
    2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
    3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
    Let us know.

  • Error message when displaying a report in a windows form

    Hi,
    use Cr 2008.SP3 Fixpack 3.5,
    Visual Studio 2008 prof. editon version 9.0.30729.1 SP,
    :NET Framework 3.5 sp1
    vb.net 2008
    when displaying a report in a Windows form sometimes the following error message appears
    System.NullReferenceException: Object reference not set to an instance of an object
       bei CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
       bei System.Windows.Forms.Control.WmMouseMove(Message& m)
       bei System.Windows.Forms.Control.WndProc(Message& m)
       bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
       bei System.Windows.Forms.UserControl.WndProc(Message& m)
       bei CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    The rest of the error message is in german:
    ************** JIT-Debuggen **************
    Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
    Konfigurationsdatei der Anwendung oder des Computers
    (machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
    Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
    Zum Beispiel:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
    Ausnahmen an den JIT-Debugger gesendet, der auf dem
    Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
    Thank you
    Otto

    Can you define "sometimes" a bit more?
    Is it after a number of runs of a report?
    Is it on a particular report?
    Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
    Can you duplicate the issue if you isolate the report to a new test app?
    Did you happen to notice if the issue existed prior to FP 3.5?
    Is this on your dev computer or a client computer?
    OS?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • How to show a error message to user from report.

    I don´t wanna to go in a form builder to create a simple form for just two inputs.
    I have put two inputs into reports parameter screen, but I know that reports is not like forms, I cannot use SET_ITEM_PROPERTY to hide an element or put a runtime message to a label.
    How can I show an error message when I validate an input from user, when some input trigger raise?
    Thanks a lot!

    The SRW.message doesn't show me no alert on report 10g !!!
    is there any restriction that can be made to block the displaying of the alert on the web environnement?
    thanks..

  • Unknown Error Message when creating Visual Reports

    I get the Unknown error message periodically when trying to create an excel cash flow report. I am running Excel 2010, and Project 2010.
    Very frustrating

    Hi Jim,
    Are you able to view other reports without any issues.
    Is the happening only on this project?
    Also, Please let me know the project professional patch.
    Thanks,
    Phani

Maybe you are looking for