Error Message "camera is unable to initialize" since update a week ago.

Camera won't work, I keep getting this error message since update android version 4.4.2. HELP!

    redchef101,
I am so sorry to hear you are having issues with your device. Lets get to the bottom of this camera issue. What type of device do you have? Was the issue resolved by following the steps provided by tbo27? If you try another camera application do you receive the same error message?
LindseyT_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Mac takes almost 10 minutes to start up since update two weeks ago

    Hello all! I've had my mac for almost three years now and it has been problem free until the beginning of this year.
    First in February the hard drive failed for no reason which of course I had to pay to replace. Since then things have
    been running smoothly until a couple of weeks ago when the computers update software prompt came up. One update
    was for security, the other update was for java. I figured both were important so of course I updated. From the next day forth
    my mac has been taking at least 10 minutes to boot up and another 4-5 minutes to open up a browser. These beneficial updates
    seem to be doing more harm than good. Can anybody help? Thanks!

    There are no known issues with any of the updates for Mac OS X.
    There is a very high chance that your hard drive might be to blame. Apple provide the highest quality of hard drives and many others are not as good and may cause performance issues.
    I would suggest that you delete any un-nesescary files and empty your trash, internet history (which can take up gigabytes of space on older Macs) and un-needed pictures. I did this last year (after backing up all the files just in case) and it sped up my start up speed.
    I would al;so reccommend using an application called CleanMyMac which will give you back tens of gigabytes of space (40GB for me!).
    The more space you use the longer it takes for the computer to locate and load files which can slow processes down, so deleting files will help your problem a lot.
    Hope this helps!!!

  • An error message came up when updating camera raw 6.7 on my CS5 on windows 8

    I Have Lightroom 5.5 and CS5 Photoshop.
    An error message came up when I tried to update CS5 and Camera raw.
    Can you assist.
    [email protected]
    Regards
    Peter

    Try manual update.
    Product updates

  • Droid Razr M Camera is unable to initialize problem HELP!!

    I have a Droid Razr M and lately when I try to use the camera I get a message saying "camera is unable to initialize".  Now this doesn't always appear but when it does I have to reboot my phone if I want to use the camera.  As you can imagine this is very frustrating and time consuming especially if you are just trying to snap a candid pic.  Does anyone else have this issue or know a fix for it??  Thanks!

    I have the same problem with my one year old Razor Max.
    I did what was suggested by breezex in #1 (pasted below) but don't know how to system cache clear/cache partition reformat.
    Settings > Apps > All > Camera    and clear cache and data
    A system cache clear/cache partition reformat.  Just follow the instructions for an alternate factory reset (using volume and power buttons) and do the cache clear instead of a factory reset.  Be careful.
    I launched in Safe Mode without success. I went to my local Verizon store and they eventually did a factory reset (wiping out everything). Then the camera worked. That was yesterday, 4/3/13.
    Now: same thing all over again, except Safe Mode helps. Camera starts but often freezes on a random image.
    This is probably happening a lot more than we see here in this page.
    Please HELP Verizon!!!!

  • I am unable to update apps on my iPhone 4. I tried rebooting but still I get an error message which says "unable to update"

    I am unable to update apps on my iPhone 4. I tried rebooting but still I get an error message which says "unable to update"

    I really didnt want to restore unless i had absolutely other option.
    as per usual, apple wont help unless i buy an apple care plan. helpful much.

  • Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

    I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem.  I've done it several times and still get the error.  I'm fearful I have lost all my music.  What can I do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • How do I resolve error message "mapi was unable to load aplzod.dll"? Outlook2010 on Win7

    Attempts to open Outlook calendar files (apparently located) on iCloud result in the error message "MAPI was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\Internet Services\APLZOD.dll". Be sure the service is correctly installed and configured."
    I am running Outlook 2010 on Windows 7. I have uninstalled and reinstalled iTunes with no apparent effect. Is this a problem with iTunes or Outlook, how do I resolve it?

    That's part of my problem - I was getting the error message when I tried to click on iCloud in the Calendar portion of Outlook 2010. I don't know where it was generated (iCloud, iTunes, or as an add-in to Outlook).
    After my original post I tried restoring my computer to a date when I knew this worked, the restoration worked, and I can access my calendar. So that problem resolved itself.
    I do have another question, but I'll post it separately. Thanks for your response.

  • Error message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later."

    I'm getting this error message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later."
    Later has come.
    What does it mean?
    How can I sync my iPad?
    Thanks

    Hi vbsugihara,
    Thanks for visiting Apple Support Communities.
    You can find troubleshooting steps to resolve the error message you're seeing in this article:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    All the best,
    Jeremy

  • Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

    Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
    This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1 
    It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'.  How do I fix it (my husband's 2 devices work fine on the PC)

    I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'.  How do I fix it (my husband's 2 devices work fine on the PC).  It's driving me mental and has stopped me putting anything new on for months.  Help!!!

    http://support.apple.com/kb/TS2690

  • My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

  • I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

    I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • The following error message came when I tried to open Firefox and install Firefox Home. "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

    The following error message came when I tried to open Firefox and install Firefox Home.
    "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

    This issue can be caused by an extension or plugin that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

Maybe you are looking for

  • Subtotal in ALV without sort technique to maintain heirarchy of records.

    Hello Abappers, In my functionality, i want to perform subtotals of the expenditures of a particular SBU. So in the ALV under each Business Unit, there are various Expense types and under them various SBU's Heirachy is as follows : BU - > Expense Typ

  • Trouble install

    I recently lost my cd and when i install a new driver i usually uninstall everything and do it clean. when i tryd this without the cd i cannot get the drivers to install properly. i have an audigy 2 zs and in add remove the driver wont even show up a

  • Creating custom activity( DSC service)..but  getting errors while starting  service in workbench

    Hi , I have some hands on   developing the  process. So I started creating one custom activity. I created one activity  which takes  inputs and gives a string after some  calculation. But program requires some additional jar  files which are  include

  • Material Master List by SQVI

    Hi, I am trying to create a List of Materials Master by using SQVI. I have used MARA table, MARC table & MVKE table. Some of the data is getting populated in the ALV Grid Display, but would like to know, what would be the sequence and the relevant ta

  • Center Mark in Outline View

    I am using Illustrator Cs6 on windows and when I used to switch to outline view there used to be a crosshair mark showing the center of shapes and the same mark for stray points, and about a week ago those marks have dissapeared. I checked the attrib