Error message "Cannot playback image" on Canon 7D using an SDHC card in a CF adapter
Just purchased a new 32GB 45MB/s Sandisk SDHC card and popped it in my CF card adapter for my Canon 7D camera. Started off doing a few trial shots and worked fine. Tried another day and worked fine at the time (or so I thought) Images all visible on the screen on replay.
I then went on a trip to London last night and was happily shooting and looking at the images regularly to check what they were loooking like and everything was initially fine. Half way trhougb the shooting I noiced that I suddenly had an error message appear "Cannot playback image". Just tried downloading onto my PC through Lightroom and nothing to be found. Says the images have not been recorded or maybe corrupted.
Does anyone know
1) How this could have happened please?
2) If there is anyway that I can retrieve the files with this message or are they all likely to be either not there or corrupted if they are there?
( The second test shoot appeared satisfactory at the time and all the images were visible fine but on loading 50% were corrupted)
Any help / advice warmly welcomed please
+ Any free Sandisc recovery programs that might help?
Cheers
Sue
You can try here.
Do not use the card until you try the recovery. In the future stick with CF cards.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7
Similar Messages
-
Acrobat X, error message "cannot delete pages, pages are in use"
Recently updated to Acrobat X. After saving a pdf, if I try to delete a page or pages, I get an error message "cannot delete pages, pages are in use". I have to close acrobat and reopen my document to continue deleting pages. Is there a fix for this? So far, I think Acrobat 7 was better that X!!!!!!!!!!!!!!!!!!
What OS are you using? Ive read that preview pane in windows vista and 7 causes an issue with the delete page feature. The suggestion was generally to turn the preview feature off.
Heres technet article on turning off the feature:
http://social.technet.microsoft.com/Forums/en/itprovistadesktopui/thread/d2a9c302-1ef1-4d9 8-9e81-a88603ae8405 -
Download error message - "Cannot Create File"
Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH Quicksilver Mac OS X (10.3.9)Recently I developed a problem and am unable to
download anything (files, software, etc) from any
website. I begin a download, the download manager
comes up and it shows an error message "Cannot Create
File." I am using the default manager that is
incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I
downloaded a software demo. I decided to get the full
software package and trashed the demo files per the
company's instructions. I got the error message when
I tried to download the full program and now get the
message no matter what I attempt to download. Might I
have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but
still have the problem. If I use an external hard
drive with spare copy of 10.3.9 and make that my
start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH
Quicksilver Mac OS X (10.3.9)
I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5) -
why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .
Try resetting the printing system.
OS X Mavericks: Reset the printing system -
Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help
I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32). Can anyone please help me solve this problem? Thank you.
Hello. Please try the following adjustment to see if we can resolve this issue: 1. Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2. Click Settings.3. On the left, choose the Auto Scan tab.4. Click the Defaults button on the lower right.5. Continue this process with each tab on the left.6. Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
-
I use a Mac. When I try to open my iPhoto Library in Elements I get the error message "cannot complete request, PE does not recognize this type of file." The import option only allows me import a "frame from Video"?
You can't use iPhoto that way. Poking around in the iphoto library from outside iphoto is just begging for trouble, the fastest way to corrupt your library and lose all your images.
You have two choices with iphoto:
1. Set PSE as your external editor and send the photos from iphoto. Save, never save as, and don't change the name or format and iphoto will remember your last saved edits and the original, although you have to lose the edited version to revert to the original. This doesn't work with raw files.
2. Export the photos from iphoto, use File>Open in PSE and then you can make all the changes to name and format that you want. Then import the saved edited version to iphoto as a new file. -
I am on a PC. AE version 12.1.0.168. It is updated.
Does anyone know how to solve this problem. We are working on a feature film shot on Sony F55 in 4K RAW.Thanks. Now it works in PP and AE.
Morten Lorentzen
+45 5342 0856
[email protected]
Den 20/01/2015 kl. 19.55 skrev Rick Gerard <[email protected]>:
I am trying to import for Sony RAW .mxf files in AE. I get an error message, cannot be imported - this.mxf file is damages or unsupported.
created by Rick Gerard in After Effects - View the full discussion
First, your AE needs to be updated. The current version is 12.2.1.5
If that does not fix the problem let us know.
Second question, are you using the Sony import utility? If not, give that a try. Last question, can you open the files in Premiere Pro? I hope you are not trying to cut a feature film in After Effects.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7114564#7114564 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7114564#7114564
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.
I just figured it out. All I had to do was close out of iTunes then restart.
-
My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?
Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
I am trying to download itunes to windows 7 and keep getting the error message "cannot access network location $APPDATA%\." I have contacted an Apple advisor and was not able to resolve the problem. What to do?
Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
https://discussions.apple.com/community/itunes
B-rock -
i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
While syncing iPad with my computer, i get an error message: cannot back-up to this computer
while syncing iPad with my computer, i get an error message: cannot back-up to this computer. I'd like to know why? Is it safe to download IOS6 if the ipad is not backed up?
This is the same computer that I originally synced with the iPad and the first backup worked. Is there any way too solve this problem so I can upgrade to iOS 6
-
Getting error message Cannot Resolve Symbol when trying to compile a class
Hello All -
I am getting an error message cannot resolve symbol while trying to compile a java class that calls another java class in the same package. The called class compiles fine, but the calling class generates
the following error message:
D:\Apache Tomcat 4.0\webapps\examples\WEB-INF\classes\cal>javac
ConnectionPool.java
ConnectionPool.java:158: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
private void addConnection(PooledConnection value) {
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
The code is listed as follows for PooledConnection.java (it compiles fine)
package cal;
import java.sql.*;
public class PooledConnection {
// Real JDBC Connection
private Connection connection = null;
// boolean flag used to determine if connection is in use
private boolean inuse = false;
// Constructor that takes the passed in JDBC Connection
// and stores it in the connection attribute.
public PooledConnection(Connection value) {
if ( value != null ) {
connection = value;
// Returns a reference to the JDBC Connection
public Connection getConnection() {
// get the JDBC Connection
return connection;
// Set the status of the PooledConnection.
public void setInUse(boolean value) {
inuse = value;
// Returns the current status of the PooledConnection.
public boolean inUse() {
return inuse;
// Close the real JDBC Connection
public void close() {
try {
connection.close();
catch (SQLException sqle) {
System.err.println(sqle.getMessage());
Now the code for ConnectionPool.java class that gives the cannot
resolve symbol error
package cal;
import java.sql.*;
import java.util.*;
public class ConnectionPool {
// JDBC Driver Name
private String driver = null;
// URL of database
private String url = null;
// Initial number of connections.
private int size = 0;
// Username
private String username = new String("");
// Password
private String password = new String("");
// Vector of JDBC Connections
private Vector pool = null;
public ConnectionPool() {
// Set the value of the JDBC Driver
public void setDriver(String value) {
if ( value != null ) {
driver = value;
// Get the value of the JDBC Driver
public String getDriver() {
return driver;
// Set the URL Pointing to the Datasource
public void setURL(String value ) {
if ( value != null ) {
url = value;
// Get the URL Pointing to the Datasource
public String getURL() {
return url;
// Set the initial number of connections
public void setSize(int value) {
if ( value > 1 ) {
size = value;
// Get the initial number of connections
public int getSize() {
return size;
// Set the username
public void setUsername(String value) {
if ( value != null ) {
username = value;
// Get the username
public String getUserName() {
return username;
// Set the password
public void setPassword(String value) {
if ( value != null ) {
password = value;
// Get the password
public String getPassword() {
return password;
// Creates and returns a connection
private Connection createConnection() throws Exception {
Connection con = null;
// Create a Connection
con = DriverManager.getConnection(url,
username, password);
return con;
// Initialize the pool
public synchronized void initializePool() throws Exception {
// Check our initial values
if ( driver == null ) {
throw new Exception("No Driver Name Specified!");
if ( url == null ) {
throw new Exception("No URL Specified!");
if ( size < 1 ) {
throw new Exception("Pool size is less than 1!");
// Create the Connections
try {
// Load the Driver class file
Class.forName(driver);
// Create Connections based on the size member
for ( int x = 0; x < size; x++ ) {
Connection con = createConnection();
if ( con != null ) {
// Create a PooledConnection to encapsulate the
// real JDBC Connection
PooledConnection pcon = new PooledConnection(con);
// Add the Connection to the pool.
addConnection(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// Adds the PooledConnection to the pool
private void addConnection(PooledConnection value) {
// If the pool is null, create a new vector
// with the initial size of "size"
if ( pool == null ) {
pool = new Vector(size);
// Add the PooledConnection Object to the vector
pool.addElement(value);
public synchronized void releaseConnection(Connection con) {
// find the PooledConnection Object
for ( int x = 0; x < pool.size(); x++ ) {
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// Check for correct Connection
if ( pcon.getConnection() == con ) {
System.err.println("Releasing Connection " + x);
// Set its inuse attribute to false, which
// releases it for use
pcon.setInUse(false);
break;
// Find an available connection
public synchronized Connection getConnection()
throws Exception {
PooledConnection pcon = null;
// find a connection not in use
for ( int x = 0; x < pool.size(); x++ ) {
pcon = (PooledConnection)pool.elementAt(x);
// Check to see if the Connection is in use
if ( pcon.inUse() == false ) {
// Mark it as in use
pcon.setInUse(true);
// return the JDBC Connection stored in the
// PooledConnection object
return pcon.getConnection();
// Could not find a free connection,
// create and add a new one
try {
// Create a new JDBC Connection
Connection con = createConnection();
// Create a new PooledConnection, passing it the JDBC
// Connection
pcon = new PooledConnection(con);
// Mark the connection as in use
pcon.setInUse(true);
// Add the new PooledConnection object to the pool
pool.addElement(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// return the new Connection
return pcon.getConnection();
// When shutting down the pool, you need to first empty it.
public synchronized void emptyPool() {
// Iterate over the entire pool closing the
// JDBC Connections.
for ( int x = 0; x < pool.size(); x++ ) {
System.err.println("Closing JDBC Connection " + x);
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// If the PooledConnection is not in use, close it
if ( pcon.inUse() == false ) {
pcon.close();
else {
// If it is still in use, sleep for 30 seconds and
// force close.
try {
java.lang.Thread.sleep(30000);
pcon.close();
catch (InterruptedException ie) {
System.err.println(ie.getMessage());
I am using Sun JDK Version 1.3.0_02" and Apache/Tomcat 4.0. Both the calling and the called class are in the same directory.
Any help would be greatly appreciated.
tnx..
addiIs ConnectionPool in this "cal" package as well as PooledConnection? From the directory you are compiling from it appears that it is. If it is, then you are compiling it incorrectly. To compile ConnectionPool (and PooledConnection similarly), you must change the current directory to the one that contains cal and type
javac cal/ConnectionPool.
Maybe you are looking for
-
How to put a tab space in a center aligned paragraph and have it remained centered?
I am trying to put a tab spacing within a paragraph that is center aligned but when I press the tab button it pushes the paragraph to the left. How do I solve the problem? I have several lines I need to do this for so adjusting it one but one is a bi
-
HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS
Hi experts,how to pass select options value as a export parameters to a zclass. can give me some idea. Thanks sai
-
What is Sharepoint client side object model ?
What is Sharepoint client side object model ?
-
Rowsettag and InsertXML with DBMS_XMLSAVE
I have used the rowsettag with the updateXML in DBMS_XMLSAVE without any problems. However, when I try and set the rowtag for the insertXML command, the insert appears to ignore the setting and tell me it can not find the ROW tags. Should ROWSETTAG w
-
What is the easiest or best way to copy a char array into a string?