Error Message "Check your settings and try again (-369033213)"
I received a Apple TV for Christmas and went to set it up tonight. I didn't expect it to be easy as my WIFI is WAP2 Enterprise and therefore has a few other hoops to jump through.
I downloaded the latest Apple Configurator and uploaded a profile with the correct credentials.
It all seemed to go fine until the last stage where it asks me to
unplug the mini usb,
unplug the power-cable,
plug in the power cable and wait until the light stops flashing and
replug the mini usb
After doing this it confirms a couple of tasks then stalls ont eh second to last task during configuration and says that the Apple TV couldn't be configured
After a couple of unsuccessful tries I plugged back in the hdmi cable and had a look on the device and the profile was loaded but couldn't connect to network.
I tested the network and got error Check your settings and try again (-369033213).
This appears to be related to the certificates not being added to the profile. These were old posts. Is this still the case?
I am a little surprised it requires the certificates to be added, Phone, laptop and computer all use the same wifi and haven't had any problems.
Is there a workaround? Techs wont be around until January and as I am not an administrator for the network wont be able to get the certificates until then.
Thanks
Apple need to look into fixing this issue. It's beyond a joke as to why they haven't made Enterprise networking a priority let alon multilicensing in Schools state and worldwide.
If anyone knows a fix that could be altered on certificates, please let me know. Although most schoold environments running a Government based certificate cannot be change or implemented any different than the rest.
Hopefully there's an update fix soon.
Similar Messages
-
Check your settings and try again (37). What is this?
Keep getting the message "there is a problem connecting to the network. Check your settings and try again (37). The Apple TV unit can see the name of my network but will not connect. I have tried to type all the Ip addresses and routers and subnet manually also and have also connected the apple tv unit to the imac and itunes to get the latest software and to restore the unit.
I can operate a laptop in the room so the signal strength is good enough, however when apple tv is on screen it does not show any bars in the signal strength.
I have connected apple tv to a room next to the router and still no luck.
Only think have not tried is a hardwire connection as the router and the tv are not close enough.I don't think you'll see a signal strength indicator until the connection is actually made.
If the AppleTV shows your network name signal must be at least good enough to detect it.
It could be AppleTV is having issues with your wi-fi encryption protocol - what are you using? What kind of router?
AC -
I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
I have successfully downloaded Itunes, however, when I click on the IStore an error message pops up "check network connection and try again". My network connection works perfectly and I have disabled all firewall and security programs. I've tried uninstall and reinstall several times and still get error message. Does anyone know how to get around this? THANKS!
Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime -
Error Occured. Please check your settings and try again while opening a RTF
Hi,
I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please.
Thanks
AravindCan you throw in more detail? I mean exact step step by process that you folowed.
Thanks, Naveen Gagadam. -
Blackberry z10 saying the apn information cant be verified check your settings and try again
Is there anyone who can help me my blackbery z10 is not going on the internet or do i even have the blackberry icon on my phone . I keep getting this message that my apn settings can not be verified but then the blackberry z10 does not use apn settings like ordinary blackberries what can i do to fix this . i hav called my service provider vodacom south africa and still cant figure it out they say all my settings are working perfectly .
Try getting a free SIM swap from your mobile provider vodacom.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
I'm getting an error message "could not sign in check your network and try again
I'm getting an error message "could not sign in check your network and try again" I've tried serval times, today and last night. I'm trying to upload to Go Daddy host. All my PW, Site URL and folder on server are correct /public_html. (I've used them to upload to FileZilla), with no problem except two pages are missing!
I've been using Muse since August with no problems, now it's causing me all sorts of problems!
Help!**** Moving to MUSE Support Portal for quick and accurate Help *****
-
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
Hi
I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime works on my iPad . can someone please help me with this problem .
thank youFaceTime, Game Center, Messages: Troubleshooting sign in issues
-
one day i loggged on and all it said was acssecing itunes store but never got there. then a message came up saying "could not connect to itunes server. check your connection and try again later". what should i do?
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me this message (Could not sign in. Please check your network and try again). Please help!!!
iPhone 4 and iPod touch (4th generation): Using FaceTime
http://support.apple.com/kb/HT4319
iPhone 4 and iPod touch (4th generation): Using FaceTime behind a firewall
http://support.apple.com/kb/HT4245
Maybe you are looking for
-
Quantity Withdrawn field in production order
Hi all, I have a doubt there is a component A in production order Required quantity is 10 Initially i issue 15 qty's then the same qty gets updated in "Quantity withdrawn" field (component overview screesn) Then i reverse 3 qty's of component A,which
-
I am sure this is a bug: in Music settings I have EQ if Off / Sound Check is On / Volume Limit is OFF and yet, when I select the Randomize button in iPod/Music (iPhone4), the sound changes (equalizer settings?). Either way it doesn't make sense!! And
-
Hello Adobe Community, I just made a clock/watch which each 3 hands move acording to the timeline, but the second hand moves quite smooth, but i was wondering what to do if i wanted it to move 1 sec at a time, so it makes a "ticking" effect, instead
-
Application help not connecting to SAP
Hi all, When i click on the help->Application help link, i am not able to see the help documentation. That is, my sap system is not getting connected to application help. Please help me... Thanks...
-
Has anyone found a way to enable PSE 11 to work with Yosemite on Mac? The plugin does not plugin.