Error message code on my HP Deskjet 3051A
Im trying to print and my printer keeps giving me a error messgae code 0X805D0074. Please HElP!!! need to print ASAP!!
Hello,
This document should be able to help: Error Message Displays on the Printer Control Panel. It describes the general issue as: While trying to print, the printer displays aan error message with numbers and letters (an alphanumeric code). For example, 'Error 0xc18a0001' or 'B8000094' might display on the printer control panel. The numbers and letters vary. Some begin with ‘0x…’ while others begin with a ‘B’ or ‘C,’ but they are usually preceded by the word ‘Error.’
Hope this helps,
I am an HP Employee.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved. If both apply......do both.
Similar Messages
-
Hello,
Just replaced the battery in my iPhone 4S. Before doing so I backed-up then wiped the phone. Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
Iphone 4 switched off error message code 21
i phone 4 just switched its self off and wont restart and when connected to itunes for reboot we get error message code 21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Hello,
I’m trying to create BluRays using Encore and I keep getting the following error messages: ‘code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds.”
For info, I created a H264 Bluray - NTSC 24fps master from an Apple prores HQ in Adobe Media Encoder. Duration: 52m, size: 11go. I'm on Mac OSX 10.9.5, the bluray burner is Samsung SE-506CB/RSWD and the BR disks are TDK Blu-ray Disc 50 Spindle - 25GB 4X BD-R - Printable.
I looked around in forums and tried the following without success: replacing disk name to shorter name without space, creating bluray without menu frame, I also tried with a Mpeg2 bluray master. I tried to export a new master but I can't seem to be able to change the audio bitrate.
Can anyone please help ?
Thanks.Hi Stan, thanks for getting back.
I tried to create a new master from Media Encoder but I can only export audio in PCM, I don't get a dolby option. See pic below.
I tried a new project in Encore and chose PCM instead of Dolby in the preference menu, but I still got the same error. Should I try again limiting bitrate to 15 ? I was on 30 before.
Please help, I've already wasted 10 bluray and this is getting really frustrating! -
For some reason I can not get into my ADE and get the error message "code: E_AUTH_NOT_ READY Digital Editions encountered an error on the activiation server.
What can I do as it will not let transfer items to my Sony reader. Thank youyes, I agree with what you say: the note '==> ...' is the solution to
my problem, found it after some time in another thread
regards
Von: sjpt <[email protected]>
An: zwergenerv <[email protected]>
Betreff: after updating ADE to version 2.0 I
am getting the error message 'code E_AUTH_NOT_READY'
Datum: Mon, 23 Sep 2013 10:59:41 +0200
RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
'CODE E_AUTH_NOT_READY'
created by sjpt in Adobe Digital Editions - View the full
discussion -
After updating ADE to version 2.0 I am getting the error message 'code E_AUTH_NOT_READY'
after updating ADE to version 2.0 I am getting the error message 'code E_AUTH_NOT_READY' when trying to authorize my computer (Adobe Id is correct, password I have refreshed, but ..) what to do?
Running ADE on WinXP with recent SP
===> use CTRL-SHIFT-D in ADE to de-authorize and then re-authorize vial Help-Menuyes, I agree with what you say: the note '==> ...' is the solution to
my problem, found it after some time in another thread
regards
Von: sjpt <[email protected]>
An: zwergenerv <[email protected]>
Betreff: after updating ADE to version 2.0 I
am getting the error message 'code E_AUTH_NOT_READY'
Datum: Mon, 23 Sep 2013 10:59:41 +0200
RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
'CODE E_AUTH_NOT_READY'
created by sjpt in Adobe Digital Editions - View the full
discussion -
Oracle error message code 1401 op 4, ORA-01401: inserted value too large fo
Hi All
I got this error when I try to run convert tables on our application server. Anyone know why? I am using Oracle 9i
Here is the error message:
Checking Table WORK_INSTRUCTION
Table not in database
Conversion Method - Create Table
Creating Table WORK_INSTRUCTION
Unable to create database table 'WORK_INSTRUCTION'
Oracle error message code 1401 op 4, ORA-01401: inserted value too large for column
WORK_INSTRUCTION definition as followings:
table work_instruction;
field identity
used_for unique_key
datatype identity;
{ APR 31/3/03 - Bug Nr WI4}
field wi_admin
{ links_to personnel . identity;}
{ links_to location . identity;}
links_to lab_section . identity;
{ ARP 31/3/03 - Bug Nr WI5 }
field wi_title
{ datatype text(20); }
datatype text(100);
field version
datatype text ( 4 );
field wi_status
datatype identity
prompt_type choose
choose_type WI_STATUS
default 'I ' ;
field wi_type
datatype identity
prompt_type choose
choose_type WI_TYPE
default '0 ';
field sterlab_status
datatype identity
prompt_type choose
choose_type STER_STAT
default '0 ';
field used_in_lims
datatype boolean
true_word 'Yes'
false_word 'No'
default 'No' ;
{ ARP WI16 28/5/03 - Extend from 10 to 45 }
field method
datatype text(45);
field ref_method
datatype text(100);
field delegate
links_to personnel . identity;
field date_expire
datatype date;
field date_draft
datatype date;
field double_method
datatype boolean
true_word 'Yes'
false_word 'No'
default 'No' ;
field technique
datatype identity
prompt_type choose
choose_type TECHNIQUE
default '0 ';
field date_distribute
datatype date;
field report_date
datatype date;
field group_autho
datatype text ( 16 );
field astm_volume
datatype text ( 6 );
field date_non_active
datatype date;
field translated_in
datatype text(10);
{ ARP WI16 28/5/03 - Extend from 60 to 2000 }
field comments
datatype text(2000);
field doc_path
datatype text ( 300 )
prompt_type user_defined
library 'TEST_SOP_FILE'
routine 'file_browse';
field modified_on
datatype date
used_for modified_on ;
field modified_by
links_to personnel.identity
used_for modified_by;
field modifiable
datatype boolean
used_for modifiable;
field removeflag datatype boolean
used_for remove_flag;
{ MOD TDR - 10/04/03 - Link to livelink document }
field livelink_url
datatype text ( 300 ) ;
Thanks
LiVerbatim from the manual:
ORA-01401: inserted value too large for column
Cause: The value entered is larger than the maximum width defined for the column.
Action: Enter a value smaller than the column width or use the MODIFY option with ALTER TABLE to expand the column width.You should find which value is bein attempted to be inserted into a column with a capacity shorter than the value length.
~ Madrid. -
Oracle error message code 1653 op 4, ORA-01653: unable to extend table
Hi
Our application use Oracle 9i as database. I modified one of tables and try to convert it from this application, then I got an Oralce 1653 error as followings:
Creating Table SAMPLE_T
Copying data from SAMPLE to SAMPLE_T
Unable to move data from table 'SAMPLE' to table 'SAMPLE_T'
Oracle error message code 1653 op 4, ORA-01653: unable to extend table SAND.SAMPLE_T by 1024 in tablespace SAMPLE_RESULT
I suspect the tablespace SAMPLE_RESULT is not big enough and also can not extended automatically, but not sure if it is right or there maybe other reasons behind this error.
Any idea?
Thanks
LiLets try .....
SQL> select tablespace_name,sum(bytes)/1024 from dba_free_space where tablespace_name='USERS' group by tablespace_name;
TABLESPACE_NAME SUM(BYTES)/1024
USERS 384
SQL> alter database datafile 'C:\ORACLE\ORADATA\MYDB\USERS01.DBF' autoextend off;
SQL> alter table scott.emp allocate extent;
Table altered.
SQL> /
alter table scott.emp allocate extent
ERROR at line 1:
ORA-01653: unable to extend table SCOTT.EMP by 128 in tablespace USERSI believe you must add more space to tablespace SAMPLE_RESULT or set the autoextend on for associated datafiles.
Hope it help ..
Bhupinder -
HT201210 iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
http://support.apple.com/kb/TS3694
-
Touchscreen not working: error message code 45, says "device is not connected to the computer"
My subject message basically says it all. My touchschreen is not working at all. I went into device manager and found error message code 45, which states that the "device is not connected to the computer."
I have tried updating drivers, uninstalling and reinstalling the device, and other things, but nothing working.
All advice appreciated.Hi @Jim9 ,
Welcome to the HP Forums!
I saw your post regarding the error code 45. From what you have described this sounds like it is a hardware issue. The only real troubleshooting I can recommend (that you haven't already done), is going a full System Recovery to restore it back to factory defaults. If the issue still occurs then we know it is a hardware problem.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Error message 0x02b7c2ed when updating HP Deskjet 3510
I just purchased a HP Deskjet 3510 and got through the setup and installation fine. I am using Windows 7 64 bit and am trying to use this printer wirelessly. I connected the printer to my wireless modem through my desktop and it said it connected successfully. When I try to use the eprint feature on the printer, it says that it needs to update. It then proceeds to download the update and then it says please wait. It stays on that screen for a couple of minutes and then returns this error: Error Code 0x02b7c2ed SM Module C. The power button flashes and that is the only button that will respond. When pressed, it automatically restarts the printer and says that the update was not successful. I don't know if it is relevant or not but it is currently hooked up through usb. I am waiting on my wireless adapter to come in a few days. I am concerned with this error message and need to know how to fix it or if I need to get a replacement. Thank you in advance.
Andrew HuberI would take a look at the document below. I would also try removing the ink cartridges and cleaning the copper contacts on the cartridges.
Alphanumeric Code
Let me know how it goes. -
I have an iPhone 4 (IOS 4.3.1) and it was synced and backed up today.
I wanted to upgrade to the latest ios on iTunes (today's date is 3rd Jan 2013), it seemed to download ok (it took about 30 minutes or so), but when it tried to update onto the iPhone (I think this was what it was doing!) I got an error message that had code 3014 in it. Nowhere on Apple's website can I find a way to resolve this error code.
I then thought I would just try again from the beginning, but I then got an error message saying that if I continued I would lose all the contents on my iPhone so I cancelled it as I don't want to lose everything on my phone.
Can anyone help me as I am not very good at technical things and I really want to upgrade the ios on my iPhone without losing all the data I have on there already. An idiots guide would be great.
Thanks.Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Pls Hlp with error message code - epub3 upload
Hi, i only have one error message from my epub upload to ibooks, can anyone tell me exactly how i would rectify this in the manifest (the exact line of code i need to enter?)
Thanks!
1 package(s) were not uploaded because they had problems:
/Users/seaward/Music/iTunes Producer/Playlists/10080339365-Wooley_mountain.itmsp - Error Messages:
ERROR ITMS-9000: "The_Mystery_Of_Woolley_Mountain1.epub: contains the following file(s) that are not listed in the OPF manifest: The_Mystery_Of_Woolley_Mountain1.epub:/__MACOSX/OEBPS/._.DS_Store. All files must be listed in the OPF manifest. For more information refer tohttp://support.apple.com/kb/TS5420" at BookThis can occur when the ePub is opened using iTunes (just to check it one last time). At the very moment you decide to use iTunes, the software adds to your ePub the file iTunesMetadata.plist, that in fact, “contaminates” the book, invalidating it.
SOLUTION: delete the file iTunesMetadata.plist and upload the ePub again. -
Help on 2 error messages / code request please
Why am I getting this error message about an abstract when I'm not declearing one.
error messages I'm getting below -----------
.\LkList.java:26: Method LinkedList getList() requires a method body. Otherwise declare it as abstract.
public LinkedList getList();
DCalc.java:10: class LkList is an abstract class. It can't be instantiated.
LkList Expression =new LkList(exp);
code below ------------------------------
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.util.*;
class JCal extends JFrame implements KeyListener
JLabel answer, expression;
JButton b1, b2, b4, b5, b6, b7, b8, b9, b10, b11, b12, b13, b14, b15, b16, b17, b18, b19,
b20, b21, b22, b23, b24, b25, b26, b27;
JMenuBar menuBar;
JMenu menu;
JMenuItem menuItem, menuItem1;
LkList equation;
String exp="";
String ans="";
double memory=0;
public JCal()
{ super("Nicks Swing Calculator");
//------------------------- labels ---------------------------------------------
answer = new JLabel(" 0 "); //Answer Lable
answer.setBounds (20, 20, 220, 30);
answer.setBorder (BorderFactory.createLoweredBevelBorder());
answer.setBackground (Color.pink);
answer.setHorizontalAlignment (SwingConstants.RIGHT);
expression = new JLabel(" 0 "); // Expression Lable
expression.setBounds (20, 55, 220, 30);
expression.setBorder (BorderFactory.createLoweredBevelBorder());
expression.setBackground (Color.white);
//------------------------- menu -------------------------------------------------
menuBar = new JMenuBar();
setJMenuBar (menuBar);
menu = new JMenu ("File");
menuItem = new JMenuItem (" Help", new ImageIcon("help.gif"));
menuItem1 = new JMenuItem (" Splash Page");
menuItem.addActionListener(new ActionListener() // Help menu
{ public void actionPerformed(ActionEvent e)
{ new JHelp();
menuItem1.addActionListener(new ActionListener() // Splash Page
{ public void actionPerformed(ActionEvent e)
{ new JSplash();
//------------------------ buttons ------------------------------------------------
JButton b1 = new JButton (new ImageIcon ("mc.gif")); // MR button
b1.setBounds(20, 100, 55, 50);
JButton b2 = new JButton (new ImageIcon ("mr.gif")); // MC button
b2.setBounds(75, 100, 55, 50);
JButton b3 = new JButton (new ImageIcon ("ms.gif")); // MS button
b3.setBounds(130, 100, 55, 50);
JButton b4 = new JButton (new ImageIcon ("mplus.gif")); // M+ button
b4.setBounds(185, 100, 55, 50);
JButton b5 = new JButton (new ImageIcon ("seven.gif")); // 7 button
b5.setBounds(20, 170, 55, 50);
JButton b6 = new JButton (new ImageIcon ("eight.gif")); // 8 button
b6.setBounds(75, 170, 55, 50);
JButton b7 = new JButton (new ImageIcon ("nine.gif")); // 9 button
b7.setBounds(130, 170, 55, 50);
JButton b8 = new JButton (new ImageIcon ("div.gif")); // divide button
b8.setBounds(185, 170, 55, 50);
JButton b9 = new JButton (new ImageIcon ("four.gif")); // 4 button
b9.setBounds(20, 220, 55, 50);
JButton b10 = new JButton (new ImageIcon ("five.gif")); // 5 button
b10.setBounds(75, 220, 55, 50);
JButton b11 = new JButton (new ImageIcon ("six.gif")); // 6 button
b11.setBounds(130, 220, 55, 50);
JButton b12 = new JButton (new ImageIcon ("times.gif")); // times button
b12.setBounds(185, 220, 55, 50);
JButton b13 = new JButton (new ImageIcon ("one.gif")); // 1 button
b13.setBounds(20, 270, 55, 50);
JButton b14 = new JButton (new ImageIcon ("two.gif")); // 2 button
b14.setBounds(75, 270, 55, 50);
JButton b15 = new JButton (new ImageIcon ("three.gif")); // 3 button
b15.setBounds(130, 270, 55, 50);
JButton b16 = new JButton (new ImageIcon ("minus.gif")); // minus button
b16.setBounds(185, 270, 55, 50);
JButton b17 = new JButton (new ImageIcon ("zero.gif")); // 0 button
b17.setBounds(20, 320, 55, 50);
JButton b18 = new JButton (new ImageIcon ("neg.gif")); // negitive button
b18.setBounds(75, 320, 55, 50);
JButton b19 = new JButton (new ImageIcon ("dot.gif")); // decimal button
b19.setBounds(130, 320, 55, 50);
JButton b20 = new JButton (new ImageIcon ("add.gif")); // addition button
b20.setBounds(185, 320, 55, 50);
JButton b21 = new JButton (new ImageIcon ("left.gif")); // left bracket button
b21.setBounds(20, 375, 110, 35);
JButton b22 = new JButton (new ImageIcon ("right.gif")); // right bracket button
b22.setBounds(130, 375, 110, 35);
JButton b23 = new JButton (new ImageIcon ("equals.gif")); // equals button
b23.setBounds(20, 415, 220, 35);
JButton b24 = new JButton (new ImageIcon ("clear.gif")); // clear button
b24.setBounds(20, 460, 55, 50);
JButton b25 = new JButton (new ImageIcon ("ce.gif")); // ce button
b25.setBounds(75, 460, 55, 50);
JButton b26 = new JButton (new ImageIcon ("sqrt.gif")); // sqrt button
b26.setBounds(130, 460, 55, 50);
JButton b27 = new JButton (new ImageIcon ("percent.gif")); // % button
b27.setBounds(185, 460, 55, 50);
//------------------- adding everything on the pane -------------------
Container contentPane = getContentPane();
contentPane.setLayout(null);
// the default layout is BorderLayout
contentPane.add(b1); // adds buttons
contentPane.add(b2);
contentPane.add(b3);
contentPane.add(b4);
contentPane.add(b5);
contentPane.add(b6);
contentPane.add(b7);
contentPane.add(b8);
contentPane.add(b9);
contentPane.add(b10);
contentPane.add(b11);
contentPane.add(b12);
contentPane.add(b13);
contentPane.add(b14);
contentPane.add(b15);
contentPane.add(b16);
contentPane.add(b17);
contentPane.add(b18);
contentPane.add(b19);
contentPane.add(b20);
contentPane.add(b21);
contentPane.add(b22);
contentPane.add(b23);
contentPane.add(b24);
contentPane.add(b25);
contentPane.add(b26);
contentPane.add(b27);
contentPane.add(answer); // adds answer label
contentPane.add(expression); // adds expression lable
menuBar.add(menu); // adds menu
menu.add(menuItem); // adds menu item "Help"
menu.add(menuItem1); // adds menu item "Splash Page"
//------------ button functions ---------------------------------------
b1.addActionListener(new ActionListener() // MR
{ public void actionPerformed(ActionEvent e)
{ String TempMemory="";
answer.setText(TempMemory.valueOf(memory)); }});
b2.addActionListener(new ActionListener() //Mc
{ public void actionPerformed(ActionEvent e)
{ memory=0; }});
b3.addActionListener(new ActionListener() //M-
{ public void actionPerformed(ActionEvent e)
{ Double DblTemp=new Double(answer.getText());
double dblTemp=DblTemp.doubleValue();
memory=memory-dblTemp; }});
b4.addActionListener(new ActionListener() //M+
{ public void actionPerformed(ActionEvent e)
{ Double DblTemp=new Double(answer.getText());
double dblTemp=DblTemp.doubleValue();
memory=memory+dblTemp; }});
b5.addActionListener(new ActionListener() // Seven
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"7";
expression.setText(exp); }});
b5.addKeyListener(this);
b6.addActionListener(new ActionListener() // Eight
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"8";
expression.setText(exp); }});
b6.addKeyListener(this);
b7.addActionListener(new ActionListener() // Nine
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"9";
expression.setText(exp); }});
b7.addKeyListener(this);
b8.addActionListener(new ActionListener() // Divide
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"/";
expression.setText(exp); }});
b8.addKeyListener(this);
b9.addActionListener(new ActionListener() // Four
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"4";
expression.setText(exp); }});
b9.addKeyListener(this);
b10.addActionListener(new ActionListener() // Five
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"5";
expression.setText(exp); }});
b10.addKeyListener(this);
b11.addActionListener(new ActionListener() // Six
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"6";
expression.setText(exp); }});
b11.addKeyListener(this);
b12.addActionListener(new ActionListener() // Times
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"*";
expression.setText(exp); }});
b12.addKeyListener(this);
b13.addActionListener(new ActionListener() // One
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"1";
expression.setText(exp); }});
b13.addKeyListener(this);
b14.addActionListener(new ActionListener() // Two
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"2";
expression.setText(exp); }});
b14.addKeyListener(this);
b15.addActionListener(new ActionListener() // Three
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"3";
expression.setText(exp); }});
b15.addKeyListener(this);
b16.addActionListener(new ActionListener() // Minus
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"-";
expression.setText(exp); }});
b16.addKeyListener(this);
b17.addActionListener(new ActionListener() // Zero
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"0";
expression.setText(exp); }});
b17.addKeyListener(this);
b18.addActionListener(new ActionListener() // negative
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"-";
expression.setText(exp); }});
b18.addKeyListener(this);
b19.addActionListener(new ActionListener() // Decimal
{ public void actionPerformed(ActionEvent e)
{ exp=exp+".";
expression.setText(exp); }});
b19.addKeyListener(this);
b20.addActionListener(new ActionListener() // Addition
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"+";
expression.setText(exp); }});
b20.addKeyListener(this);
b21.addActionListener(new ActionListener() // Left Bracket
{ public void actionPerformed(ActionEvent e)
{ exp=exp+"(";
expression.setText(exp); }});
b21.addKeyListener(this);
b22.addActionListener(new ActionListener() // Right Bracket
{ public void actionPerformed(ActionEvent e)
{ exp=exp+")";
expression.setText(exp); }});
b22.addKeyListener(this);
b23.addActionListener(new ActionListener() // Equals
{ public void actionPerformed(ActionEvent e)
{ LkList equation = new LkList();
equation.ProcessExpress();
ans=equation.getAns();
answer.setText(ans);
exp="";
ans=""; }});
b23.addKeyListener(this);
b24.addActionListener(new ActionListener() // Clear
{ public void actionPerformed(ActionEvent e)
{ exp="";
ans="";
expression.setText(exp);
answer.setText(ans); }});
b25.addActionListener(new ActionListener() // Clear Entry
{ public void actionPerformed(ActionEvent e)
{ exp="";
ans="";
expression.setText(exp);
answer.setText(ans); }});
addWindowListener( new WindowAdapter()
{ public void windowClosing(WindowEvent e)
{ System.exit(0);
this.setBounds(10, 10, 270, 600);
this.show();
public static void main(String[] args)
{ new JCal();
public void keyReleased(KeyEvent evt){}
public void keyTyped(KeyEvent evt) {}
public void keyPressed(KeyEvent evt)
{ char x=evt.getKeyChar();
switch(x)
{ case '0': exp=exp+"0";
expression.setText(exp);
break;
case '1': exp=exp+"1";
expression.setText(exp);
break;
case '2': exp=exp+"2";
expression.setText(exp);
break;
case '3': exp=exp+"3";
expression.setText(exp);
break;
case '4': exp=exp+"4";
expression.setText(exp);
break;
case '5': exp=exp+"5";
expression.setText(exp);
break;
case '6': exp=exp+"6";
expression.setText(exp);
break;
case '7': exp=exp+"7";
expression.setText(exp);
break;
case '8': exp=exp+"8";
expression.setText(exp);
break;
case '9': exp=exp+"9";
expression.setText(exp);
break;
case '+': exp=exp+"+";
expression.setText(exp);
break;
case '-': exp=exp+"-";
expression.setText(exp);
break;
case '*': exp=exp+"*";
expression.setText(exp);
break;
case '/': exp=exp+"/";
expression.setText(exp);
break;
case '.': exp=exp+".";
expression.setText(exp);
break;
case '(': exp=exp+"(";
expression.setText(exp);
break;
case ')': exp=exp+")";
expression.setText(exp);
break;
default: break;
// ================================= equation =============================
class Equation
{ private double nbr1;
private double nbr2;
private char op;
private double answer;
private String StrNum1="";
private String StrNum2="";
private String StrOper="";
private String StrAns="";
//Constructor
Equation(String number1, String number2, String operator)
{ StrNum1 = number1;
StrNum2 = number2;
StrOper = operator;
convert();
public double getNum1() {return nbr1;}
public double getNum2() {return nbr2;}
public char getOp() {return op;}
private void convert()
{ Double temp=new Double(StrNum1);
nbr1=temp.doubleValue();
temp=new Double(StrNum2);
nbr2=temp.doubleValue();
op=StrOper.charAt(0);
private void convertAnswer()
{ StrAns=StrAns.valueOf(answer);
public String toString()
{ return StrAns;
public void calculate()
{ switch (op)
{ case '+': answer=nbr1+nbr2;
break;
case '-': answer=nbr1-nbr2;
break;
case '*': answer=nbr1*nbr2;
break;
case '/': answer=nbr1/nbr2;
break;
convertAnswer();
// =============================== linked list ================================
class LkList
{ char[] operator = {'+','-','*','/','(',')'}; // operators used
LinkedList Express = new LinkedList(); // Linked list of expression
String StrExp = null;
String oper = ""; // operator
String number1 = ""; // first number used in expression
String number2 = ""; // second number used in expression
String answer = ""; // answer of expression
Exp TempExp; // Temporary expression
String Temp;
// Constructor
LkList (String e)
{ StrExp = e;
formList (); // expression turn into liked list nodes
trimList (); // remove spaces from linked list expression
public String toString()
{ return Express.toString();
public LinkedList getList();
{ return Express;
public String getAns()
{ return Express.get(0).toString();
public void ProcessExpress() // removing brackets
{ removeBrack();
private void formList()
{ int j = 0;
boolean lastOper = true;
for (j = 0 ; j < Express.length(); j++ )
{ if (!(belongTo(operator, StrExp.charAt (j))))
{ Temp = Temp + StrExp.charAt (j);
lastOperator = false;
if (belongTo(operator, StrExp.charAt (j)))
{ if ((StrExp.charAt (j) =='-') && (lastOperator))
{ Temp = "-";
lastoperator = false;
else
{ Express.add (Temp);
Temp = "";
Temp = Temp + StrExp.charAt (j);
Express.add (Temp);
Temp = "";
if (StrExp.charAt (j) == ')')
{ lastOperator = false;
else
{ lastOperator = true;
Express.add (Temp);
Temp = "";
private void trimlist ()
{ int sp = 0;
while ((sp !=-1))
{ sp = Express.indexOf ("");
if (sp !=-1)
{ Express.remove (sp);
private static boolean belongTo (char[] ar, char c)
{ for (int k = 0; k < ar.length; k++)
{ if (c == ar[k]) return true;
return false;
private boolean findBrack ()
{ if (Express.contains (")"))
{ return true;
return false;
private void removePoints (int pt1, int pt2 )
{ int range = (pt2 - pt1);
for (int j = pt2; j >= pt1; j--)
{ Express.remove (j);
private void processOperator (String Oper)
{ int point =-1;
while (Express.contains (Oper))
{ point = Express.indexOf (Oper);
oper = Express.get(point).toString();
number1 = Express.get(point-1).toString();
number2 = Express.get(point+1).toString();
TempExp = new Exp (number1, number2, oper);
TempExp.calculate();
answer = Temp.toString();
Express.add(point-1, point+1);
removePoints (point-1, point+1);
point =-1;
private void removeBrack()
{ int opBrack = 0;
int clBrack = 1;
int j = 0;
String Temp = "";
while (findBrack())
{ clBrack = Express.indexOf (")");
j = clBrack;
do
{ Temp = Express.get(j).toString();
if (Temp.charAT(0) =='(')
{ opBrack = j;
j--;
while (opBrack < 0);
number1 = Express.get(opBrack +1).toString();
number2 = Express.get(clBrack -1).toString();
oper = Express.get(opBrack+2).toString();
TempExp = new Exp (number1, number2, oper)
TempExp.calculate();
answer = TempExp.toString();
Express.add(clBrack+1, answer);
removePoints(opBrack, clBrack);
opBrack=-1;
clBrack=0;
private void removeDivide()
{ processOperator("/");
remMult();
private void removeTimes()
{ processOperator("*");
remAdd();
private void removeAdd()
{ processOperator("+");
remSub();
private void removeSub()
{ processOperator("-");
// ================================= help menu ============================
class JHelp extends JFrame
{ JTextArea textarea;
public JHelp()
{ super ("Help");
Container contentPane = getContentPane();
/* JPanel textPan1 = new JPanel (new BorderLayout());
textarea = new JTextArea ("How to use Nicks Calculator");
textarea.setWrapStyleWord(false);
JScrollPane textAreaPane1 = new JScrollPane (textarea);
textPan1.add (textarea, BorderLayout.CENTER);
contentPane.add(textPan1);
textarea.setEnabled(false); */
JLabel lab=new JLabel(new ImageIcon("helpmenu.jpg"));
contentPane.add(lab, BorderLayout.CENTER);
setBounds(400,200,400,400);
this.show();
// ================================ Splash Page =============================
class JSplash extends JFrame
{ public JSplash()
{ super ("Splash Page");
Container contentPane=getContentPane();
JLabel lab=new JLabel(new ImageIcon("nick.jpg"));
contentPane.add(lab, BorderLayout.CENTER);
setBounds(400,200,250,320);
this.show();Spot the difference:
public LinkedList getList();
public LinkedList getList()
Notice the semi-colon. Thats the problem -
"Jigsaw" CSS Validator Error Messages, Code Not Found
My page is created in DW CS5.
The page I'm testing (http://jigsaw.w3.org/css-validator/) is: www.aloe-vera.org/index.htm
I am getting error messages. But, when I got to the line of code indicated, the code isn't there. These are the errors (which I don't understand anyway):
166
ul.MenuBarHorizontal iframe
attempt to find a semi-colon before the property name. add it
0
ul.MenuBarHorizontal iframe
Parse Error null
166
ul.MenuBarHorizontal iframe
Property opacity doesn't exist in CSS level 2.1 but exists in : 0.1 0.1
166
ul.MenuBarHorizontal iframe
Parse Error 0.1);
167
ul.MenuBarHorizontal iframe
Parse Error }
If the code can't be found on the line indicated, where does one find it?
Thanks, David (Honaker, in Phoenix, AZ)As much as I would push users to that site, there are some parts of the Spry 1.0 framework that cause this type of error to occur. What Adobe did was include "hacks", for lack of a better term, to make the Spry as compatible as they could in older versions of IE. They did this knowing that the code would note validate. It appears with some other Spry items as well. I do not believe the 2.0 Spry Widgets (in the Widget Browser) have this same code validation issue.
The only validation error on that page that I would worry about is the one on your index.htm with the ul.nav a, ul.nav a:visited background attribute. The hex color can be written shorthand (3 characters) or full length (6 characters). Yours currently is C6580 which is one number short.
Maybe you are looking for
-
Skipping first view of a Web Dynpro Application
Hi, I have an entrance screen to a WebDynpro Component on which the user has to enter a value for an input field and select one of the processing modes( Create, Delete, Change) for this object. There are some input checks and some data are filled for
-
Agent12c on different platforms (without SelfUpdate)
Hi Is there a way to install an agent other than one on which my Management Service runs ? SelfUpdate is not configured in my oms server since internet access is disabled.
-
what I am asking is ridiculous for most. anyways this is my code String pattern = "MM/dd/yyyy"; String value ="11/12/1976" SimpleDateFormat sdf = new SimpleDateFormat(pattern); Date birthDate; Calendar todayDate; Date now = new Da
-
Hey guys Ok basically i downloaded both these games and i have no sound. So Far i have tried the following solutions http://ubuntuforums.org/showthread.php?t=918344 http://linuxgamecast.com/2011/04/l-g-c- - attle-cqb/ I made the launcher and setup th
-
I was in my mom's car charging my iphone up until 8 percent because we had to get out of the car to go eat. She turned off the car and I unplugged it. My screen automatically went black and won't turn on again. When I got home, I plugged it into a wa