Error message (Competitor not defined )

when i create customer as a competitors has account group 0006  ..... and go to create new material as competitor products (Material type WETT)  and  i put number of competitor  at basic data screen in competitor sub screen ... this message appear (this competitor not defined but i  created this competitor

Dear h.abozied,
Is this issue in a CRM system or ECC system? Could you please provide the message number?
Thank you and best regards,
Ian Kehoe

Similar Messages

  • Error-Message "Item not defined on current page" after Page submit - AJAX

    Hello,
    a lot of subpages (regions) are loaded over htmldb_get and displayed on a master page.
    The parts loaded over AJAX are reports. The report regions of these reports contain a hidden and protected field, which hold the page number (&APP_PAGE_ID.)
    This was necessary because I had to overwrite the standard pagination function $a_report on the master page. Otherwise the standard pagination function uses always the page number of the master page and not the page number of the loaded subpages. The overwritten function $a_report is placed in the master page header and searchs for the hidden + proteced field, containing the page number of the loaded subpage.
    This works already fine.
    But after submitting the master page with before loaded subpages over htmldb_get, I get following error message:
    Error Item ID (15348310159873659) is not an item defined on the current page .
    Setting the hidden + protected field on the subpage to never display, the error message disappear, but the pagination function doesn´t work any more.
    Where is the mistake I made?
    Greetings
    Michael

    Hello Ben,
    yesterday evening I read in short your answer, but today I can´t see your answer. Have you edited it again?
    My pagination function works fine and I would maintain it if possible.
    But now a new feature is requiered, which require a submit on the master page. The submit on the master page is not possible due to the hidden field on the loaded subpage, containing the page number for the pagination function.
    Using a normal text field (not saving state) works as long as the text field is visible (condiational view != never). But this information shouldn´t be visible to the user.
    I thought, perhaps a cleanworkaround exists.
    As dirty workaround I could place the information about the actual page number in the report themself (static invisible column). But as soon as the column is invisible (not shown), I have no access on this value
    With a normal hidden html-input-element (not a APEX-Item) in the report regions header of the subpage, holding the page number, I get a http 400 error on page submit.
    An I-Frame is not really a solution, because the master page contains several subpages, which should only be loaded and displayed on demand and not immediatly on page load.
    Greetings
    Michael
    Edited by: user6044915 on 31.03.2009 00:27

  • I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

    I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

    Hello, MommaLloyd24. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Error: JAVA_HOME is not defined correctly - While running ant.

    I have upgraded the JDK 1.5 Update 10 to Update 14. After upgrading the ant is failing when using with cygwin.
    It's giving the below error message:
    Error: JAVA_HOME is not defined correctly.
    We cannot execute /cygdrive/c/Java/jdk14/bin/java
    The JAVA_HOME is set properly & even I am able to check java -version.
    I am using apache-ant-1.6.5 and cygwin.
    Have any one faced the same problem?
    Please let me know if you have any solutions

    Grrrr. Been having a similar problem, but with Maven2. Allow me to (hopefully) save someone the gnawing of teeth and several bald patches.
    For starters, the Maven documentation gives you a pretty clear example of how to set your PATH. This is as follows:
    export PATH=/usr/whatever/whateveragain/apache-maven-2.0.10/bin:$PATH
    Simple, eh? Note the colon before $PATH. Then, it states quite presumptuously "4) Make sure JAVA_HOME is set to the location of your JDK". However, you don't set it in exactly the same way. You set it in virtually the same way, except without the colon, like this:
    export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0$JAVA_HOME
    Note that if you get the paths wrong a couple of times, you may reset them with the unset command. So to unset JAVA_HOME you'd use:
    unset JAVA_HOME
    After which you may set it again. As is advised, you may try to set the user privileges, but they didn't seem to affect my luck at all. Hope this helps!

  • Fault Message is not defined?

    Hi @,
    I am using BPM asyn sync for File2RFC scenarion and while activating the scenarion I am getting return code 99 and when i see the activation log I am getting errro description as Fault Message is not defined I have done the Fayult message mapping between Abstract Sync Message and RFC Sync message between their fault and exception types but still
    Help is urgent
    Regards

    Hi,
    you define the exception handler in the block properties. Define (via context) an exception branch for the block, where you jump into in case of errors and decide, what to do (f.e. alert or stop process).
    Regards,
    Udo

  • TO confirmation error - item category not defined

    Hi experts,
    We have a HU/WM setup in our warehouse. While i try to confirm the TO i am getting an error 'item category not defined'?
    I am able to confirm the TO's for other orders, this is happenning for a specific group of orders which have a different item category in delivery.
    Any hints when this error will appear?
    Is there any config where we assign the delivery item category with the warehose or any other setting?
    Thanks,
    Harish
    Edited by: Harish RJ on Jan 24, 2011 7:02 AM

    I suggest have a look at OSS note 1464539 - your settings in table T184L might be wrong.
    Is it possible that the batch is determined via WM, during picking? If different batches have been determined for one item, it will cause batch split in your delivery - if settings in T184L are wrong, system cannot cope with it and may throw error message VL324.
    (sorry for duplicate, I was slow a little bit and "Sap: IN" said the same in the meanwhile)
    Edited by: Csaba Szommer on Jan 24, 2011 8:29 AM

  • Error messages are not posted into ECH using collect method

    In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
    In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

    Hi,
    Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
    CALL METHOD i_ref_registration->collect
       EXPORTING
         i_single_bo      = input
         i_component      = 'ZSWC'   "Software component defined while FEH customisation
         i_process        = 'ECH_BP'  "ECH Business process defined while FEH customisation
         i_error_category = lc_errcat
         i_main_message   = wa_error
         i_messages       = lt_error
         i_main_object    = wa_object.
    Here while populating the wa_object, the  objtype field should be populated with the object type defined while FEH customization.
    If all these things are done, then this should post the error.
    Regards,
    Abijith

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

    I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • When I try to save a photo, I get error message Could not complete your request because of a program error.  What's wrong?

    I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error."    I exit Elements, try again, same error. 
    In past I had this problem but it resolved when rebooted PC.  This time, PC reboot does not help.
    I cannot save anything i do in elements!!
    What's wrong?  Any suggestions how to fix this?   Anyone know what the program error is

    Please mention your PSE version and underlying OS.
    Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
    Regards
    Kishan

  • I get a "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" error every time I try to open a new tab.

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/777191]</blockquote><br>
    Just like the title says, starting with Firefox 4 Beta 6 or 7, I forgot. Any time I try to open a new blank tab (sometimes even when I start up Firefox and the app tabs load) I get an error that says "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" If I close it everything works as normal again (until I open a new tab) but it is very annoying to have to do this. Is there any fix for this or is the bug just still there?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

Maybe you are looking for

  • Report Painter - New Columns Don't Show Up

    Hello All, We have a report painter report that was copied from an existing report in transaction CJE5 (for modifying the form) and then assigned in CJE1 (to a report). The copied report was functioning properly with an existing tcode assignment. Now

  • Photo's out order when burned to disc

    Hi, my photo's are in numbered order in the library but when burned to disc are all random, they have been edited from 3 cards and saved as a smart colllection, how can I get them to burn in order as library shows them !! thanks steve

  • Contribute 4 & DW 8

    Up until this AM, I was able, in DW 8, to administer my sites in Contribute 4. Now I get the message that "You must install Macromedia Contribute version 2.0 or later to administer a site. Would you like to install Contribute now?" I already have Con

  • Nested animation doesn't move on 'Play', but does on 'Test Movie'

    I'm using Adobe Flash Pro CS6 12.0.0.481 on Mac OSX 10.6.8, freshly installed in the last day - so I haven't been fiddling with preferences yet. I'm using nested symbols for a bouncing ball animation. The innermost cymbal is the ball object itself ('

  • Types are pixelated and original fonts can't be found

    Hello, I have this annoyance that occurred in the last month of reinstalling Leopard from Snow Leopard.  My computer was acting incredibly slow from Snow Leopard so I reinstalled Leopard again.  Afterward I noticed that many of the fonts from the pul