Error Message concerning template after starting the application

Hi all,
I just developed a WebDynpro Application in which a Adobe Form is used in one view.
After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
Unfortunately I am getting, the following error message:
<b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
Does anybody know how to solve this problem?
Thank you in advance.
Best regards, Patrick.

Hi Patrick,
Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
regards
Sumit

Similar Messages

Got an error message "You can't open the application iMovie because it may be damaged or incomplete" What do I do next to try to fix? Thanks.

I tried accessing imovie after not using it for a long time and got an error message "You can't open the application iMovie because it is damaged or incomplete. I'm not sure how to go about addressing it. Your suggestions would be very much apprecaited.

Judging by your OSX, I presume that your iMac would have come with 2 installation discs.
iMovie and all the iLife software will be on disc 2.
Run the disc and re-install iMovie.
After that, do a software update.,
Best,

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

QUESTION: Were you induced to upgrade to Mavericks after seeing this dialog box?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
Does anybody know if this is fixable or if I need to just buy a new disk?
Thanks!!!

I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
Does a macbook pro meet these requirements?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

Error message: 'you can't open the application because the Classic environment is no longer supported'

I get the error message 'you can't open the application because the Classic environment is no longer supported', when will this issue be fixed? I need to use a program to analyse videos called 'J watcher' that is vital for my thesis. It worked in the last operating system but refuses to open in this one. When will this issue be fixed/what can I do about it?

Is there any way to fix this?
Yes, but it's not easy.
I've only tested this on Snow Leopard, but I think it will work in Lion. You need to have Java installed, which it's not by default in Lion. Since I'm not using Lion myself, I can't tell you how to do that.
Download the Java/Mac version (1.0) of the application from JWatcher Downloads. You'll get a zip archive. Expand it. Now you have an application called "JWatcher_V1.0." This is only the installer. It won't run, because it has PowerPC-only version of the Java application stub.
Select the line of text below in your browser and copy it to the clipboard:
/System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/MacOS
In the Finder, select Go > Go to Folder... from the menu bar (this menu may be slightly different in Lion.) Paste the clipboard contents into the text box. You should now see a folder with two files in it, one of which is named "JavaApplicationStub." Leave that window open.
Now right-click on the icon of JWatcher_V1.0 and select "Show Package Contents" from the contextual menu. A new Finder window opens. Open the folder called "MacOS". Inside that folder is a file also named "JWatcher_V1.0". Move it to the Trash. Drag the file JavaApplicationStub to where it was. Rename the file (it will be copied, not moved) JWatcher_V1.0. Close the Finder window.
Now double-click the installer. It should launch. Install the application wherever you choose. You're not done yet.
The installer creates a folder named, once again, "JWatcher_V1.0". Inside it is an application. That, too, is named "JWatcher_V1.0". Select it, and do exactly the same thing you did before with the installer: replace the binary inside with a copy of JavaApplicationStub.
You should now be able to run it.

Adobe Template Error after starting the application

Hi all,
I just developed a WebDynpro Application in which a Adobe Form is used in one view.
After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
Unfortunately I am getting, the following error message:
<b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
Does anybody know how to solve this problem?
Thank you in advance.
Best regards, Patrick.

Hi Patrick,
Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
regards
Sumit

CS5.5 Debug / Windows 7: A lot of assertions after start the application

Hi
I have installed Indesign CS5.5 DEBUG on a Windows 7 Professional PC. But I have a lot of assertions if I start the application. On this PC, there are more versions of Indesign installed (CS3, CS4, CS5, debug and release).
I have assertions like (3 examples):
- GetGlyphIDs - ColdType didn't give us any glyphs. Marking fond as bad. PSName - MinionProRegular
- FontManager::QueryFont - default font has problems
- invalid container
- What could be the problem?
- Does anybody have the same experience?
- Problems with a font?
If I create a new text box and want to write text in it, Indesign crashs. Hm?
Thanks
Hans

Hi
I removed (deinstalled) InDesign CS5.5 and InCopy 5.5 and installed InCopy CS5 again. Now, Indesign CS5 and InCopy CS5 work both.
I will try it again (install CS5.5) versions and will inform you about my experiences.
Thanks
Hans

I get an error message when trying to install the applications dvd after restoring my MBPro to factory; What can I do?

It goes through all the steps but on the last one for installation, I get an error message saying it failed to install, try again (roughly).

This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Getting an error message talking about not initializing the application's security component when starting up

i get a message every time i start up firefox saying "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

Error message "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?

I tried to install the SmartMusic Studio, but a error message appeared "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?

denise.lombardi wrote:
I tried to install the SmartMusic Studio, but a error message appeared "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?
Download
SmartMusic 2012a
It is compatible with Lion

Tried to install a new game but got error message "You can't open the application "XIII Install" because PowerPC applications are no longer supported." I have since read that Yosemite doesn't have the program. What can I do?

Tried to install a new game that I bought (Xiii) for my MBP. All system req have been met and exceeded, however when trying to install it I get an error message saying "You can’t open the application “XIII Install” because PowerPC applications are no longer supported."
I have since read online that the operating software Yosemite has got rid of PowerPC applications, meaning I can't install my new game.
Is there anything simple that I can do to get this game to work. I'll be gutted if not as I have opened the game therefore the shop will not give a full refund, I'm sure .
Regards
Simon

A lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software.

Error Message concerning template after starting the application

Similar Messages

Maybe you are looking for