Error Message : Condition record

Hi,
I would like to print a message ZZ00 in a PO.
The condition record is saved but can't be displayed when i create the PO.
I have to do it manually.
In output -> GOTO -> Determination analysis
The system found the condition record but it's can't be displayed. This message appear :
"The condition record for use B can not be displayed"

Hi.
....in the IMG you must enter:
->Message Types
---> Define Message Types for Purchase Order
Goto:
Fine-Tuned Control: Purchase Order
Add your output-type here.....

Similar Messages

T4i Rebel error message "movie recording has stopped automatically"

I was recording my client when suddenly I got a this error message "movie recording has stopped automatically" and I could not record video anymore. I am recording on a class 10 sandisk Ultra card. 720/60, EFS18-135mm lens. Never had any problems in the past. First I get a small veterical meter on the frame and then after 5 secs the recording stops with this error message. Please tell me it is opeartor error...I have had this camera for 2 years now and never had a problem. I tried multiple cards.
thanks for the help,
DM

Either you or the person you spoke to at Canon was confused.
What the camera requires for video purposes is a card which is "at least" Class 6 or faster. The class designation is an indicator of the cards data transfer speed. Class 6 actually means the card is capable of transfering data (either reading or writing) at "at least" 6 megabytes per second. A Class 10 card can transfer data at "at least" 10 megabytes per second.
The T4i is also compatible with "UHS-1" cards... which are significantly faster than eithe Class 6 or 10.
The reason for requiring "at least" Class 6 has to do with how fast the camera is attempting to capture and save frames of video to the card. The camera actually has an internal memory buffer which is very fast. When you start recording, the data is being saved to that buffer... and simultaneously the camera also starts taking the data from the buffer and saving it to the memory card (which is slower). If the camera is recording video only slightly faster than the card can record, then it will actually take a few minutes before the buffer is completely filled. But at that point the camera has no choice but to stop recording because it has absolutely no place to save data ... the internal buffer is full and it can't empty the buffer because the memory card can't save data as fast as new frames of video are coming in.
Faster is always better.
Memory cards do actually wear out and develop errors over time. This is normal. A good card will re-map the bad blocks so they aren't used anymore... and this is why you should do a low-level format IN CAMERA (not using the computer). Good cards also have a "memory leveling" technology to try to use all the blocks roughly an equal number amount. This extends the userful life of the card.
When replacing the card, do not skimp on quality! I cannot emphasize that point enough. Most times when someone brings up this issue... it's the card that is having problems and not the camera.
It's easy to produce forgery cards which look like a good brand but are not. Buy GOOD cards from REPUTABLE dealers. Do not shop for the cheapest website on the Internet with a questionable reputation in order to save a couple of bucks.
Lexar brand and SanDisk brand are good.
When buying memory cards, I only buy cards from Lexar and SanDisk. I also buy their highest end cards (by speed performance... not necessarily their biggest capactiy cards). I buy the cards from dealers with a solid reputation. This avoids the unpleasant error messages which always seem to happen at the worst possible time.
Tim Campbell
5D II, 5D III, 60Da

Getting Accessiblity Error Message before Recording Software Simulation...

In Captivate 7, I go to start a brand new software simulation (chrome screen) in OSX and I get the following error message:
Before recording application applications, select 'Enable Access for Assistive devices' in 'System Preferences' > 'Accessibility'.
The pics below show the red screen capture box and the error I get when I try to capture when trying to capture the screen. Also included is a pic showing accessibility is enabled.
I have no idea where this is coming from.

...and here's the answer:
http://captivatecrazy.blogspot.com/2014/01/record-new-software-simulation-in-adobe.html

Mass update for message condition records

Hello all,
with Transaction NACE we maintained thousands of message condition records.
Now we have to change for all this message condition records the "Number of Messages" (Table NACH Field ANZAL).
Is there a mass change Option available or is there a function module we could use?
Thank you
Best regards
Manfred

Dear Manfred
i think you want to change All condition records of some condition type In NACE , you want to change Date and Time ex:
Am i right ?
Yes it is possible in NACE T.code level only
So here Give What is Your application like V2
Now click on condition record and Just go to change mode And give application V2 Example
after this change Date here it will applicable to all condition type what ever in your V2 Application and all condition type
Apart from This i thing some Function Module May be there but i cant recall
Please let me know
Thanks a lot

MM Message Condition Records

Hi,
We have migrated Message Condition Records to new Purchase Organisation. Now while creating new RFQ's or PO's with new Purchase organisation, the message condition is in green but print is not coming. If we check in the processing log, it says Processing log doesnt exist. It is not even going to Spool (SP02). Whereas while creating RFQ or PO with Old Purchase organisation print is coming and also visible in spool. All the settings for Message condition type and record are same. Even we are unable to print preview the PO with new Purchase Org. We have checked the Print Forms and Routines also. There also no check is there for new Purchase Org. Can anyone help us.
Regards/
Praneeth

Hi,
Did you try to o/p in me29n? what the response? Have you maintained the condition records in MN01/02 for the combination of new org enttities? Perhaps thats why spool isnt created since there might not be object data for the destination entities.
check the following thread might help
Output type PO - NEU spool request
Thanks
Shiva

Error message while recording a vocal track

While recording a vocal track through a mic attached to a MOTU interface it will record a little then an error message comes up saying "Error while trying to sync audio and midi" I've tried changing buffer size anything else?

Hi Anamika,
If you are running your query in Web Portal, it seems your web portal is not defined in RFC connection with system. Ask BASIS to connect it.
Also, You can run your report in RSRT with ABAP Web option and check if it is working on ABAP engine.
Regards,
Harpal
Edited by: Harpalsinh Gohil on Aug 17, 2009 2:53 PM

Error Message : Condition type is not maintained in the schema RM0002

HI Gurus,
I have created a new purchasing procedure as follows.
ZVATV : Condition Schema
VATV : Condition Type
VA : Sch.Grp Vndr
When I create the Purchase order, the above mentioned schema, ZVATV is automatically determined.
But when I create Contract, system throws an error message saying condition type VATV is not maintained in the schema RM0002.
I am very new to SAP, Kindly explain in very detail about this error message and ways to get rid of it.
If u have got any very detailed material about pricing kindly forward it to my mail id: [email protected]
Thanks in advance.
~Gokul.

Hi,
The new condition type you are specifing is the gross price condition (PB00). for PB00 condition type a supplementary pricing procedure is assigned as RM0002. u may have copied the PB00 and changed it to VATV, but with out changing the RM0002. copy the RM0002 and in that also change the PB00 to VATV. after this go to VATV condition type control data (M/06) and assign the new supplementary pricing procedure instead of RM0002.
The supplementary pricing procedure is required to have the condition types for which no access seqeunce is mentioned. All the condition types in main pricing procedure with out access sequence needs to be mentioned in supplementary pricing procedure.therefore all these condition types will have the same validity periods as PB00.
Regards,
Ramakrishna

Error message after recording and running Action In PS CS3

I have recorded an action to create a transparent image on a batch of photos. Next I ran the image processor using the File/Scripts/image processor. When running the action the error message occurs no matter how many ways I attempt to modify the action. Error: The object "Style "Shape Style"" is not currently available.
I then look in the action window to check and under the steps Make Fill Layer: Style: Shape, Style 1 appears but I can't delete it.
This one error message makes it impossible for me to image process a batch of photos with a watermark on them.
Thank You In Advance for your Help.
SPE

can you save them into a new action set then save that?
ex. create a new set, icon bottom of action palette, then create a new action in that set, then save that set via the flyout menu in the action palette and save action set
what i'm getting at is maybe you have the action palette file locked.
the main file is called "Actions Palette.psp" and lives in: C:\Documents and Settings\YOUR_USER_NAME_HERE\Application Data\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings
make sure you have full access to that folder.
another thing to maybe try... copy out that whole folder to a new location. then delete everything in it. then restart photoshop. then try to save the action again. at worst you can always copy the old files back in, at best, you'll clear out a disturbing error...

Error message when recording video

Have QT 7 Pro and it sees my camera, I set up hit record and I see the audio bar moving but the screen is black. When I stop the recording I get this error message:
*RECORDING FAILED BECAUSE NO DATA WAS RECEIVED*
*Make sure that the media input source is turned on and playing.*
Well the device is plugged in and turned on and the Mac sees it on the QT program because when I choose 'Movie Inspector' my camera is chosen as the source. Also the A/V settings are greyed out as to not be able to adjust.

Check that your video drivers are up to date.

Error during condition record maintenance EXEM

Hello Guys,
I am trying to maintain condition records for the condition type EXEM. I am getting an error during this process.
When I get into VV11 and enter the condition type EXEM and hit enter, I get the list of key combinations. For any key combination I select and press enter, I get an error and the following log details. Please find the log details below. Any inputs to fix this error during condition maintenace would be appreciable. The config is maintained perfectly and does not indicate any error.
Thanks
Venkat
Status      Note
Information     882 Coding generator started
Information     851 Report RV13B998 saved
Information     883 Text pool for report RV13B998 written in language E
Error           806 Report RV13B998 has a syntax error
Information     722 Text pool for program RV13B000 does not exist in language 0
Information     883 Text pool for report RV13B998 written in language 0
Information     883 Text pool for report RV13B998 written in language 1
Information     722 Text pool for program RV13B000 does not exist in language 2
Information     883 Text pool for report RV13B998 written in language 2
Information     883 Text pool for report RV13B998 written in language 3
Information     722 Text pool for program RV13B000 does not exist in language 4
Information     883 Text pool for report RV13B998 written in language 4
Information     722 Text pool for program RV13B000 does not exist in language 5
Information     883 Text pool for report RV13B998 written in language 5
Information     722 Text pool for program RV13B000 does not exist in language 6
Information     883 Text pool for report RV13B998 written in language 6
Information     722 Text pool for program RV13B000 does not exist in language 7
Information     883 Text pool for report RV13B998 written in language 7
Information     722 Text pool for program RV13B000 does not exist in language 8
Information     883 Text pool for report RV13B998 written in language 8
Information     722 Text pool for program RV13B000 does not exist in language 9
Information     883 Text pool for report RV13B998 written in language 9
Information     722 Text pool for program RV13B000 does not exist in language A
Information     883 Text pool for report RV13B998 written in language A
Information     722 Text pool for program RV13B000 does not exist in language B
Information     883 Text pool for report RV13B998 written in language B
Information     883 Text pool for report RV13B998 written in language C
Information     883 Text pool for report RV13B998 written in language D
Information     883 Text pool for report RV13B998 written in language E
Information     883 Text pool for report RV13B998 written in language F
Information     722 Text pool for program RV13B000 does not exist in language G
Information     883 Text pool for report RV13B998 written in language G
Information     883 Text pool for report RV13B998 written in language H
Information     722 Text pool for program RV13B000 does not exist in language I
Information     883 Text pool for report RV13B998 written in language I
Information     883 Text pool for report RV13B998 written in language J
Information     722 Text pool for program RV13B000 does not exist in language K
Information     883 Text pool for report RV13B998 written in language K
Information     883 Text pool for report RV13B998 written in language L
Information     883 Text pool for report RV13B998 written in language M
Information     883 Text pool for report RV13B998 written in language N
Information     883 Text pool for report RV13B998 written in language O
Information     883 Text pool for report RV13B998 written in language P
Information     883 Text pool for report RV13B998 written in language Q
Information     883 Text pool for report RV13B998 written in language R
Information     883 Text pool for report RV13B998 written in language S
Information     883 Text pool for report RV13B998 written in language T
Information     722 Text pool for program RV13B000 does not exist in language U
Information     883 Text pool for report RV13B998 written in language U
Information     883 Text pool for report RV13B998 written in language V
Information     722 Text pool for program RV13B000 does not exist in language W
Information     883 Text pool for report RV13B998 written in language W
Information     722 Text pool for program RV13B000 does not exist in language X
Information     883 Text pool for report RV13B998 written in language X
Information     722 Text pool for program RV13B000 does not exist in language Y
Information     883 Text pool for report RV13B998 written in language Y
Information     722 Text pool for program RV13B000 does not exist in language a
Information     883 Text pool for report RV13B998 written in language a
Information     722 Text pool for program RV13B000 does not exist in language b
Information     883 Text pool for report RV13B998 written in language b
Information     722 Text pool for program RV13B000 does not exist in language c
Information     883 Text pool for report RV13B998 written in language c
Information     722 Text pool for program RV13B000 does not exist in language d
Information     883 Text pool for report RV13B998 written in language d
Information     722 Text pool for program RV13B000 does not exist in language i
Information     883 Text pool for report RV13B998 written in language i
Status      Note
Information     884 Screen generator started
Information     860 Screen SAPMV13B 1998 saved
Information     858 Screen SAPMV13B 1998 generated
Status      Note
Information     890 Text field for field INSMK not found
Information     860 Screen SAPMV13B 2998 saved
Information     858 Screen SAPMV13B 2998 generated

What part of the code would you like?
It says there is an error in Report RV13B998. This is part of standard.
Thanks
Venkat.

System Overload/Core Audio Error Message when recording/playback

Well ive been experience this problem for a while now but ive read up on it and done some troubleshooting and think i may have found a solution.
Well what happens is ill be recording say one track or 2 tracks in mono or stereo or playing back about 3 or 4 tracks and logic will stop everything and give me an error message which either says system overload or core audio overload or something. Well i figured i was overloading my cpu so what i tried doing was restarting my computer and then only operating logic as the only program. this worked temporarily sometimes but not in the long run. well i did research and came to this.
apparently its too overbearing for my Powerbook processor to record in 24 bit/96 Khz which is kind of a bummer because it was one of my attractions to my i/o box that i could do that. also freezing tracks will help greatly apparently which i have yet to try but hope will work too.
also i recently deleted about half of the stuff on my internal drive and put my 42.41 GB of music onto my external HD so now i have 54.6 GB on my internal HD which holds about 93 GB total. should this help me greatly? or will it only be a minute difference?
well any more solutions/suggestions as to what i can do to better my situation? also am i correct as to why i think i get those error messages.
ps: sorry for the uncapitalization, i got a bit lazy here
thanks
-Mike

Mike,
Bit depth is more important for recording quality than huge sample rates. If you're going to change your settings, I'd stick with 24 bit, but reduce sample rate to 48 kHz.
When you say you've put all your music on the external drive, what exactly do you mean--your Logic files or your mp3/AAC files? Normally you would want to use an external drive to record onto from Logic. That way your internal HD can run the OS and Logic, while the external is free for all the fast recording tasks. (This assumes your external HD is pretty fast, and ideally is firewire.)
Freezing works wonders, too, if you're processing tracks.
-Eric

Message condition records

Hi
How to find the what are the condition records maintained in the system?
I know only PO document types, don't what are the outtypes were created earier.
Raju

Hi Raju ,
You may try with the Table NACH.
Regards
Ramesh Ch

Error message during recording.

I seem to be getting this message of late each time I run a recording project.What do I do? Please help.I haven't been moving the Mac around so no way it's in motion too!
Disk is too slow or System Overload.
(-10010)
The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time.
I am using the latest version of Logic & my system info is below.I have about 15 stereo tracks on the recording project where I seem to find this eror message, that is running on 24 bit/48... sample rate,with some plugins on most tracks.The Imac is running on a 4 GB mac.Here is the system info
Model Name:     iMac
Model Identifier:     iMac11,2
Processor Name:     Intel Core i3
Processor Speed:     3.06 GHz
Number Of Processors:     1
Total Number Of Cores:     2
L2 Cache (per core):     256 KB
L3 Cache:     4 MB
Memory:     4 GB
Processor Interconnect Speed:     5.86 GT/s
Boot ROM Version:     IM112.0057.B00
SMC Version (system):     1.64f5

The answer is in the message: "the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time"
You speak of 15 stereo tracks. Is that how many you are recording, or playing back? Or both? If it is not the number of tracks you are recording, how many are you recording (simultaneously)?
When you say "a few plugins", that is (I'm sorry) pretty useless information, since some plugins hardly tax the CPU at all, while others can sometimes even max out a CPU-core. A screenshot of your complete mixer would be much more informative.
Also, how many GB is your system disk, and how many GB are still free? (I assume here that you record to your system disk, which is not the best way to get maximum performance. You should seriously consider getting a FireWire 800 external disk, to store your Logic projects on (= to record your audio to).
Two extra tips: disable all inputs on audio tracks you are done recording to, and make sure you do NOT have a Software Instrument track selected.

Error message to record video

Hi,
Please could someone help me to find and correct the error in the VI.
I am using a USb webcam to measure the intensity of light in a ROI then record a short video.
Unfortunately, I receive sometimes an error of timeout.
I think the labview is confused by the presence of two vision aquisitions and I want to reduce the mode of video to 600*350.
Cheers,
zied
Attachments:
Untitled 3.zip ‏67 KB

Hi ziedhosni,
I looked at your code and I do not notice anything that would cause an problem. Where do you get the timeout error? Could you attach a photo of it?
Have you tried going through your code with Highlight Execution on? Please do this and let me know where you get the error.
Julian R.
Applications Engineer
National Instruments

Error Message When Recording

Hello I am constantly getting an error when I try to record in Adobe Audition CS5.5. It keeps saying the input and output device sample rates don't match. So I cannot record my voice. What do I do?

You'll need to make sure that the sample rate for your input and output channels of your device match.
1. Right-click on the speaker icon in the lower-right corner of your desktop and choose Recording Devices
2. Right-click the Microphone (or desired input channel for the device) and choose Properties
3. Click the Advanced tab and verify or change the Default Format option
4. Click OK then click the Playback tab. Right-click on your default or desired output channel and choose Properties
5. Make sure the Default Format option matches what you selected for your recording channel. (You'll notice in this screenshot, my playback device is configured for 48,000Hz while my microphone was configured for 44,100Hz. These need to match.)
6. In Audition, create a new session. For best results, ensure your session sample rate matches the sample rates you selected for your decices. Audition will attempt to convert the sample rate of your recording on-the-fly to match the session sample rate, but it's always recommended to work at a single, consistent sample rate to ensure no change to the audio signal takes place.

Error Message : Condition record

Similar Messages

Maybe you are looking for