Error Message: Conversion of file content to XML failed at position 0: sun.

Hi Experts,
i strugle with a File 2 IDOC Scenario.
In the sender communication channel monitoring I get the error message:
Conversion of file content to XML failed at position 0: sun.io.MalformedInputException
Unfortunately I am not getting any further information and I do not know where the file-adapters problem is.
Tthe .fieldSeparator = # . Can this be the problem, that the file-adapter-engine can not handle # within file conversion? I also tried it with .fieldSeparator = '#' . But the error message is the same.
I am glad for any hints.
Thank you for your help in advance.
Regards,
Udo

Hi Udo,
The error is due to wrong intput.
putting # might be a reson.
You Can try (,) or a space as a field separater.
Can you test this once.
Have to defined the field separated?
Regards,
Sumit Gupta

Similar Messages

  • ERROR :Conversion of file content to XML failed at position 0

    Hi Frnds,
    I have a File to File scenario, while testing I am getting the following error:
    Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'TA_830':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
    Can any one please tell me why Iam getting this error even I have provided the following informantion in channel configuration. Here TA_830 is the record name.
    TA_830.processFieldNames     fromConfiguration
    TA_830.fieldNames     SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,REF_NUM,PAYER_ACC,VAL_DATE,ISO_CURRENCY,AMOUNT,RESV_11,SEG_NUM,EXCHG_RATE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_18,SEG_NUM,BANK_ID,BANK_CODE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_5,SEG_NUM,ACCOUNT,ADDR1,ADDR2,ADDR3,ADDR4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,TOTAL_AMOUNT,RESV_59
    TA_830.fieldFixedLengths     2,6,12,5,6,7,5,5,3,1,1,16,24,6,3,15,11,2,12,24,24,24,24,18,2,1,24,24,24,24,24,5,2,24,24,24,24,24,6,2,30,30,30,30,6,2,30,30,30,30,6,2,6,12,5,6,7,5,5,3,1,1,16,59
    TA_830.fieldContentFormatting     nothing
    Regards,
    Shiva.

    Hi,
    As you are using Fixed Length File...use below specified parameters:
    TA_830.fieldName:          Names of Fields in teh File
    TA_830.fieldFixedLegths: Lenghts as per your file
    TA_830.keyFieldValue:    If you use any value as key
    TA_830.lastFieldsOptional: YES
    TA_830.endSeparator :        'nl'
    This will help you out..
    Thanks,
    Kishore.

  • Error message c:\program files (x86)\itunes\ituneshelper.exe   r6034

    can not log into itunes, get the following error message:  c:\program files (x86)\itunes\itunes help.exe
    R6034
    I have uninstalled and reinstalled and still unable to login

    Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
    If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
    If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
    For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
    tt2

  • I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

    I keep getting the error message "Missing PDFMaker files  Do you want to run the installer in repair mode"when I try to convert a file into a pdf.  I have tried uninstalling then reinstalling but I continue to get the message.  I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

    Hey Suzanne,
    Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
    If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
    Have you tried using Print to PDF option from the File menu for the same?
    Please check and then let me know.
    Regards,
    Anubha

  • I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.

    I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.  How can I find files that seem to be missing?

    This is probably one of the files that is required by the template you are using.
    These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
    You need to dig down through the folders and files to find what you want...
    Contents/Resources/da.lproj/Templates/
    If the file is missing you would need to re install the iWeb app...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5

    The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5
    This is happening for most of the pupils and staff at our school and they are unable to complete their work.
    This also happens on a fresh copy of windows and CS5.5 without any updates and also with all latest updates.
    I have tried it on 32-bit and 64-bit CS5, Windows, Air and Java with the same error every time.
    There are a small minority of users where this works fine for them with no issue.
    I have tried re-setting user profiles.
    I have tried a local admin and domain admin account with the same issue
    I have noticed however that if the file is moved to the shared area it will compile. If it is on their documents area it will not compile. The users have full control in both locations. This is fine for staff but we are unable to give full control or modify access to the shared area for the pupil's
    I have been through the online support section and it directed me to phone Adobe Customer care who informed me that all support has been discontinued for CS5, CS5.5 and CS6 and they will only support creative cloud.
    Any ideas what to try next? There is no other information about this error and I cannot work out what is causing it.

    I have tried and  able to package an apk using your XML file.Could you please make sure your XML file starting from line 1 and coloumn 0.Any space will results in the error (Application Descriptor file cannot be parsed)
    -Pranali

  • Problem when adding ascx user control in the MasterPage: Parser Error Message: The referenced file ... is not allowed on this page.

    Hello,
    I have to maintain a SharePoint 2010 project, in which a TopNavigation User Control for SiteCollection is registered in the MasterPage in this way:
    <%@ Register TagPrefix="ABC" TagName="TopNavigation" src="~/_layouts/ABCApplication/MainSite/Navigation/TopNavigation.ascx" %>
    <asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server">
    <asp:ContentPlaceHolder id="PlaceHolderHorizontalNav" runat="server">
                                        <ABC:TopNavigation ID="TopNavi" XMLDataLocation="/_layouts/ABCApplicatopm/MainSite/TopNavigation.xml" IsRoot="true"
    runat="server" />
    </asp:ContentPlaceHolder>
    </asp:ContentPlaceHolder>
    When I deploy the SiteCollection, the TopNavigation user control is working correctly. Unfortunately when i modify the masterpage over SharePoint Designer, the following error message comes allways, regardless of the art of changes i did in the MAsterPage
    ( even if I open the MasterPage, add an space and do save/close the MasterPage).
    "Problem when adding user control in my custom master page, Parser Error Message: The referenced file '/_layouts/Navigation/TopNavigation.ascx' is not allowed on this page."
    Any ideas?

    Hi Simon,
     When we use UserControl in SharePoint Page or MasterPage, and the UserControl is kept in any folder other than ControlTemplates, we will got the error. Here is an article about this issue and provided the solution:
    http://sharepoint-tina.blogspot.com/2009/07/referenced-file-pathxyzascx-is-not.html 
    The solution can also be used in SharePoint 2010.
    Qiao Wei
    TechNet Community Support

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • After editing a photo, I sometimes get an error message that the "File is empty".  Can revert to original and start again, but file disappears after editing.

    So frustrating!  I open the photo.  Edit by cropping, adjusting color, etc.  It's perfect.  I click DONE and move on to the next.  When I come back, the first photo is gone.  I can see it in the album but cannot open it.  When I look at the file information, it shows zero KB.  If I move it to the desktop and try to open it, the error message says the file is empty.  I can revert to original and there it is.  Edit again, and again it disappears.  What am I doing wrong?  I am using iPhoto 09

    You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
    Regards
    TD

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error message "cannot locate file"

    I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

    Have you added all the songs to the library? Just by dragging and dropping?

  • Installed iTunes 64 on Windows 7 (home) HP and received this error message.  The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes.  Please help.

    I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message.  the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes.  Please help! 

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?s

    After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?  I have been attempting to move my Library to a newer MacBook Pro.

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    hello!
    i have a similiar problem:
    i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
    its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
    or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
    thanks, florian

Maybe you are looking for

  • Error while running the program

    Hello everybody I have installed jdk in my computer, but when I try to run the program it shows the following error "Unable to load the main class" The program is compiling properly the only problem is in running the program. What is the reason for t

  • DB Deployment failed in planning

    Hi: I installed Essbase and configured and tested and everything is ok. I installed Hyperion planning and when I tried to configure the database through configuration utility, I get the following error. (Oct 12, 2008, 11:28:55 AM), com.hyperion.cis.c

  • C++ Runtime Error when opening iTunes

    When I try to open iTunes, the iTunes window pops up and I get a runtime error with the Microsoft Visual C++ Runtime Library. Specifically, it says - Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6025 - pure virtual function call Anyone

  • My pinned aps not display as thumbnails therefore I'm not able to organize them into folder groups

    I have just downloaded Firefox 4 but have not made it my default browser yet. I am going through the tutorials. This is what it says: "When you enter the Tab Groups view for the first time, you'll see thumbnail previews of all of your tabs in one gro

  • IMovie crashes when I try to open the webcam

    Can anyone help? Much appreciated! Here is the message it gives me: Process:         iMovie [508] Path:            /Applications/iMovie.app/Contents/MacOS/iMovie Identifier:      com.apple.iMovieApp Version:         9.0.6 (1763) Build Info:      iMov