Error Message - Could Not Sign In
The following error message was displayed in red:
"Could not sign in. Please check your network connection and try again"
I experienced this problem, too -- and with the help of an Apple support rep, figured out a way out.
Go into Settings and turn off automatic date and time, and set your phone back a year. Then go back and turn automating date and time back on, to get back to the present. Now go to Settings > iTunes & App Stores, click on your AppleID, and re-enter it and your password. Finally, go back to the App Store (or iTunes Store) and try to download what you had been trying before -- and if you're like me, it will now pop up with a new set of Terms and Conditions for you to approve. After you approve, you'll be able to download whatever you had been trying to.
It appeared, in my case, that Apple needed to present me with a new Terms & Conditions to approve, but for some reason, iOS 6 and the Apple mother ship weren't communicating correctly about how to do that, and I was stuck with the "Could Not Sign In" message. Changing the iPhone's time and/or re-signing in via Settings > iTunes & App Stores resolved the roadblock for some reason. Hope this works for others as well!
Similar Messages
-
This is a question for a mini iPad...
I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred. I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
Regards. -
I'm getting an error message "could not sign in check your network and try again
I'm getting an error message "could not sign in check your network and try again" I've tried serval times, today and last night. I'm trying to upload to Go Daddy host. All my PW, Site URL and folder on server are correct /public_html. (I've used them to upload to FileZilla), with no problem except two pages are missing!
I've been using Muse since August with no problems, now it's causing me all sorts of problems!
Help!**** Moving to MUSE Support Portal for quick and accurate Help *****
-
just purchased a new ipod touch when i tried to activate it and access itunes iget an error message "could not sign in there was a problem connecting to the server" anyone else have this problem? thx
figured it out needed to use my password for my wireless router so the ipod could access my wifi.
-
App store error message "could not sign in" "an unknown error has occurred"
has anyone else gotten this message when trying to sign into the app store:
"could not sign in" "an unknown error has occurred"
i know my password is correct, i signed in on my macbook and on my imac and no issue there.
i called apple and they coulnd't figure out what it is, i reset my network settings and same thing. of course i can't do a restore because i'm at work and we don't have the new lighting cords here for me to hook up to my imacI experienced this problem, too -- and with the help of an Apple support rep, figured out a way out.
Go into Settings and turn off automatic date and time, and set your phone back a year. Then go back and turn automating date and time back on, to get back to the present. Now go to Settings > iTunes & App Stores, click on your AppleID, and re-enter it and your password. Finally, go back to the App Store (or iTunes Store) and try to download what you had been trying before -- and if you're like me, it will now pop up with a new set of Terms and Conditions for you to approve. After you approve, you'll be able to download whatever you had been trying to.
It appeared, in my case, that Apple needed to present me with a new Terms & Conditions to approve, but for some reason, iOS 6 and the Apple mother ship weren't communicating correctly about how to do that, and I was stuck with the "Could Not Sign In" message. Changing the iPhone's time and/or re-signing in via Settings > iTunes & App Stores resolved the roadblock for some reason. Hope this works for others as well! -
To finish the upgrade setup, can't get past the screen where you need to log in with your apple id and password. Error message appears "could not sign in" "Could not communicate with the server." Tried a reboot, but that didn't work or get us anywhere either.
Go to Settings then down to Facebook then select account then delete account and select remove info and re enter your user name and password and then it will work again
-
When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred, any suggestions what is wrong? I reset our Internet and turned off the iPad.
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again. -
What do you do when trying to download an app from App Store and get message: "could not sign in, an unknown error has occurred."
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again. -
HT2731 What do you do when you get the message could not sign in an unknown error has occurred
What do you do when you get the message could not sign in an unknown error has occurred when it ask for your password while trying to download apps?
In settings I signed out of my iTunes account, then signed back in.
It’s now working for me… Hope this helps. -
I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error isPlease mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan -
Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.
The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files... -
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
Error Message - "could not complete your request because the preset contains invalid data"
I am trying to open a file, and every time I do it comes up with the following error message:
"Could not complete your request because the preset contains invalid data"
I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
I have tried:
- restarting my mac
- opening different files created at different times
- deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
Any help? Thanks so much in advance!
Pat DryburghThe one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset. -
SFTP Receiver adapter error Message could not be forwarded to the JCA adapter
Hi Experts,
I'm needing help to solve a problem with an SFTP Receiver interface.
Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
Message
could not be forwarded to the JCA adapter. Reason: 2: Moving
/ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
Any help will be welcome!
tks.Hi Durga and Naveen...
I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
I changed to a directory without the intervention of the legacy application and it worked.
I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
Tks All for help!
Maybe you are looking for
-
How do I sync audio books from iTunes in iPad with my new iPhone 4???
-
What EXACTLY does q-range in logic pro do?
I read the manual and it said that it is "A very musical quantization strategy that requires a certain amount of technical musical prowess. Q-Range is ideal for recordings that already have the right groove but are too hurried or laid back in places.
-
My iPhone is freezing all the time
Ever since I upgraded to the 2.0 software my iPhone has been freezing upwards of 10 times a day... i only have 5 apps, and I still have 2GB of space on my 8GB Is there anything I can do to stop my iPhone from freezing... also, when i try to reset it,
-
How can I customize my terminal?[SOLVED]
I'm using xterm and /bin/zsh, but it looks ugly. It's a white background with a black text. On debian, I use to right click and hit preferences and went from there. But when I right click it just highlights the shell. How can I customize background c
-
HT1257 Exporting photos with titles
Exporting photos for use on Windows through the Finder (not through Share) does not allow the titles I have attachged to the photos to be expored along with them. Does anyone know a way that will allow this?