Error message destination number format incorrect

i have sony xperia z3 and when i send a message i get text stating destination number format incorrect HELP

Do you have the correct APN settings? how old is your SIM card? are you using the preloaded Messaging app or a third party app?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Destination number format incorrect error message

I have recently upgraded to a 5c from android and for some contacts, even iPhone numbers, can't send a message. Keep getting destination number format incorrect. Happens even after I edit contacts data

Hello anglojax65,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Error Message: "The parameter is incorrect" when trying to modify SSLs

Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.

Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I am trying to send a text message from my iPad when I enter phone number I get error message phone number not registered with iMessages from contacts

When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.

TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage.

Incomplete list Oracle Database Error Messages Part Number B14219-01

The following regards documentation on Oracle® Database Error Messages Part Number B14219-01 as read on http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14219/intro.htm
Reading an example on Message Stacks in section 1 Using Messages, the following error description is nowhere to be found in the main list: ORA-06502. So are many other very common errors like ORA-00942 ¿Are these described in another book?
Thanks,

Hello again. I have learned that some of these older low-number error messages were present in the code in a different and abbreviated format than the one eventually agreed upon. These messages were entered by hand in the Error Messages book. When we began generating the messages directly from the code, some of these older messages were inadvertently dropped. We hope to fix this problem in the next release by changing the code. I apologize for any inconvenience this causes. For now the only workaround is to go back to an earlier version of the documentation, as the meaning of the messages has not changed.

Hp recovery on laptop gives error message "destination drive not connected"

I'm trying to carry out factory reset on my 2012 G6 laptop product code B2Y48EA*ABU serial no. [Personal Information Removed] to factory settings using set of 5 recovery discs
I followed the procedure shown here (although the screen messages are slightly different)
http://support.hp.com/gb-en/document/c01867418
I started the laptop with disc 1 in the dvd drive and the hp program was displayed. I selected "factory reset" and followed promts
When the 4 th disc is in dvd drive and the process is about53% compltete it stops with the error message
"destination drive not connected"
and fails
Earlier the recovery manager reported that the partion on the hard drive had been re-forrmatted so the drive was connected then!
All help and suggestions appreciated

Hi there @Teka,
I understand that you are having trouble with a System Recovery to a factory image using recovery disks. I am happy to help you with this.
Are those five disks a set that you created using the recovery manager, or is it a set you ordered from HP?
Is there any sign of damage, scratches or smudges on the disk it fails on?
Have you tried cleaning the DVD drive?
Also take a look through these pages, in particular the troubleshooting page, and see if anything there is of use.
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know how it goes for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

IWeb 08 error message "The file format is invalid"

I have been reading all of the problems regarding publishing iweb pages at the moment, I too cannot publish my site but I get a different error message
"The file format is invalid"
Can anyone help as to why I might be getting this message?
My iDisk seems to have a very old version of my website stored and I don't know where to look to find the current versions files?
Why hasn't iDisk got the most up to date version of my iWeb site and how do I get it to have?
Which folder on the iDisk should your iWeb files be stored in?
Sorry to ask so many questions but I am new to the publishing part after spending weeks building a site only to find it I get an error and my iDisk file structure holds old files.

When I opened iWeb I could see the most up-to-date version of my site, I could edit it and save it (to where I don't know). When I opened the web and sites folder on my iDisk it contained only the files from a previous version of my website created months ago.
I tried looking for the Domain file for my iWeb site and looked in my home folder, application support and then iWeb but the iWeb file in App support was empty.
I believe the iWeb file in App support is where the Domain file should be located, correct?
I have used Time machine to go back a week and have located the domain file and have restored it. The domain file now sits in the iWeb folder in App support in my Home, where it should be.
Now when I load iWeb I see the version of my website that was created a week ago which is fine but iDisk still has the old file structure of my site from months ago.
Can I delete the old file structure completely from the Sites folder on my iDisk? this should remove the old version of my website shouldn't it?
How do I get the restored version of my website to appear in iDisk?
Do I simply copy the Domain file into the sites folder on iDisk?
My iWeb files on Mobile me are also the months old versions, how do I update these so my new site is all that I can see?
Any answers to my 'File format' problem when trying to upload, is it because I don't have my iWeb files in the correct places?

Error message "unsupported image format" over red screen

Working my way through a project making corrections to a series of jpegs, when the image preview disappears and turns red with the error message "unsupported image format" in small print over the top, the thumbnail is fine and I know the image to be fine. Move on to the next 2-3 images all with the same message and then the App hangs.
Force quit and relaunch Aperture and the images are ok again.
I am assuming that the previews are corrupting and causing this. Oh the app has been hanging intermittently throughout he day, I have trashed both the pref's and the App support folder, but still I get the spinning beach ball.
Any thoughts?
Tony

I just noticed a similar problem. But for me it seems to be only for images referenced from my iPhoto library. I have not seen it yet on images imported directly into Aperture. If I click on a folder of images they appear fine at first, but if I just leave it displaying the first image after a few seconds the image disappears and displays the "unsupported image format" message over a red screen. Or it may display a random icon from somewhere in the application. And then the preview images start changing. Sometimes they change to what looks like system or application icons (arrow, the ratings "star", a printer icon, etc.)
Peter

Error message "Maximum number of drilldown characteristics exceeded"

Hello,
an user created a Web report. In the navigation block there are nearly 100 selection fields. If you make either "drilldown in the rows" or "drilldown in the columns" you recieve after 50 drilldowns the error message "Maximum number of drilldown characteristics exceeded" and it is not possible to proceed further. Does anybody has got an idea what this can be?
Thanks!
Regards,
Christian

Hi Check SAP Note No -
Note 144478 - BEx: Termination/Message at 10th/20th drilldown characterstc
1. Terminations occur when you drill down a large number of characteristics at the same time during interactive navigation in the Business Explorer Analyzer (Excel).
2. In the global query definition, the system displays message 'Termination: the maximum number (10/20) of drilldown characteristics is exceeded' if the total of the characteristics and structures you are using exceeds
              - 10 objects in Release 1.2B
              - 20 objects in Release 2.0A/2.0B/2. 1C
              during the definition of a query.
Hope it helps
regards
Vikash

Vimeo video unable to connect. Error message says "video format or mime type is not supported.

Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

Hi,
This seems to be a Firefox error:
Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
Kindly check if you are able to view the video on Vimeo.
Also, try using another browser.
Hope it helps,
Sonam

Can't access a mailbox - error message "unexpected response format"

I went to look at mail message in one mailbox. At first it said that it was having difficulty downloading from the server. I closed and opened the mail program and then I couldn't even get that message. I went over to ".mac" to see if I could view the message there, and I am now seeing an error message - "unexpected response format".
I have already tried to "rebuild" the mailbox. That didn't work. I've had some problems that were similar, and I've deleted a mail message that was causing the thing to be stuck. This time, I can't even get in. Need serious help, thanks.

The thing is, this appears to be a .Mac issue that none of us can do anything about, and for which one of the .Mac Forums may be more appropriate...

OSX Mavericks & QT Error Message: Movie contains an incorrect time value

Ever since I upgraded, I can not edit my QTime movies in Quicktime Player 7. I keep getting
Error Message: Movie contains an incorrect time value
All the fixes I have read from the past blogs are not working.
Is there a fix? If not, what editing software do I need to start using that is as easy as Quicktime 7 was?

I figured out a work around, I trim the selection I want, then export to a MOV file with same settings (I have tried H264 and ProRes compression). I can then open that file to copy and paste.
What a pain - I hope apple can update this issue somehow.

Error message SWF_UTL_000 number 021

Hi Team,
When I try to process an Output Type for an Outbound Delivery, I am getting the error message "Object reference expected: 'IDOCMSG' is not a valid object type" (Message Class: SWF_UTL_000 Message Number: 021). I think this is related to a work flow and it is getting trigged at the Class: CL_SWF_IO_SERVICES Method CHECK_OBJTYPE, because the Read at the Internal table "supertypes" fails. This internal table is populated in the function module SWO_QUERY_SUPERTYPES where the object type is not present in the table SWOTIP but it is present in the table TOJTB.
Can someone please tell me the link that is missing and what are the steps to correct it?
Thanks in advance,
S.Dakshna Nagaratnam.
Edited by: Dakshna Nagaratnam on Jan 26, 2011 9:26 PM

Hi,
I think system behaves correctly.As there is no sufficient stock to do the GI, that's why Goods movement is not possible even though you have change the msg control.
In this case one possibility is there.Go to OPK4.Select your Plant and Order type combination.Now in detail screen go to General Individual entry Tab, here don't activate or remove tick if it is already activated for Error Handling in case of Error in Goods Movement.This will allows you to complete the Order confirmation incase of there is a error in goods movement.
Regards,
Dhaval

ITunes purchsed book cannot open. Error message: "cannot open format"

I purchased book on iTunes and now cannot open it. Error message: Format not comparable,
Cannot open.

maybe you don't have enough space on your ipad so it can't open, else contact apple

EDI-IDOC-To see error messages of number of IDOCS

Hi,
I have a scenarios where more than 1000 inbound idoc are with status 51. I want analyse the error messages of all.
When i see the entry in EDIDC table the status text is 1&, 2& in stead of document numbers.
Pl let me know with which program i can see the exact errors of number of idocs. Now i am going to WE02 and clicking on status which is very very time consuming.
Thanks
Jatin

Hi
Please use the following t codes:
1) WE05
2) BD87 - for further processing of inbound idocs
depending on your R3 ver- the screens will be having the advanced screen fields
both the above will be useful - buit be careful of BD87 - experiment with this in development before doing so in production -
I use the above 2 regularly for all my IDOC analsys and re procesing alongwith we02 also
cheers
nandu

Error message destination number format incorrect

Similar Messages

Maybe you are looking for