Error Message 'Disc could not be read from or written to' HELP!!!!!

I'm a novice at all this, so any sympathetic help would be really welcome. I have downloaded the uptodate iPod and iTunes updates but I still keep getting the failure message ' Attemting to copy to iPod failed. the disc could not be read from or written to.' It is downloading some music, on occasions, but not all. What is wrong? Is my iPod faulty? Any help would be welcome.

Thanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?

Similar Messages

Error: This disc could not be read from or written to....

Hi,
Just got a new ipod video 30g. When transferring songs, fails after a while....transfers some songs then this error pops up:
"Attempting to copy to the disk 'Joe's Ipod'failed. The disc could not be read from or written to."
I've searched this in the help section and this page comes up:
http://docs.info.apple.com/article.html?artnum=301267
But my computer software is very minimal..and Windows XP is up to date. Cords appear fine and not loose...
HAVE NO IDEA What the problem is. I've tried restoring it to original settings. I've even reinstalled iTunes...
Anyone know what to do?
Is my iPod just faulty?
Ipod video 30g Windows XP
Windows XP

Hey there,
Have you tried any of the troubleshooting techniques from below? Check it out. Hope it helps.
http://support.apple.com/kb/HT1207
B-rock

Error Message: "Disk could not be read from or written to".

New 5th Gen. was downloading CD's I loaded into iTunes just fine; when uploading tunes into iPod yesterday this error message appeared: "Attempting to copy to the disk (iPod name) failed. Disk could not be read from or written to". Restored iPod with 1/10/06 update of iPod Install; using iTunes 6.0.2; operating system 10.3.9. Frustrated. iPod useless at this point. Anyone found a fix to this vexing problem?
Thanks,
John

Thanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

I firewired I-tunes music from crashed I-mac to a new I-mac. Then tried to sync my I-pod w/ the new computer and got messages "I-pod cannot be synced". Also, "the disc could not be read from or written to- you don't have the privilege to make changes"

I firewired my i-tunes library from my old computer to a used I-mac which I bought. All purchased songs & playlists
were succesfully transferred. When I tried to sync my empty I-pod to the used I-mac I received these messages.
          - I-pod cannot be synced
          - The disc could not be read from or written to
          - You dont have the priveledge to make changes.
This is all my music legally downloaded and purchased from I-tunes. How to I circumvent this barrier?
                     Thanks, jaime

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

"The disc could not be read from or written to"

I have a 80G Classic and when I tryed to sync it with iTunes for the first time I got this message "Attempting to copy the disc Classic (iPod) failed. The disc could not be read from or written to. I have restored and rebooted the iPod and the Mac. When I synced it again it synced for a while and put one album plus calendar and contacts on the iPod, then the same massaged appeared and the sync stopped. Any ideas please?

See if this troubleshooting article helps.
Disk cannot be read from or written to error syncing iPod in iTunes.

The attempt to burn a disc failed. The disc could not be read from or written to.

I am trying to burn a cd after upgrading to itunes 12 and this message keeps coming up."The attempt to burn a disc failed. The disc could not be read from or written to." there is no problem with my hardware since I can burn cds using nero. Please help. Thanks

Here is a solution that worked for me!
1. Uninstall iTunes 12
2. Download and install iTunes 11.4
3. Run iTunes 11.4. You will get a message that the library was created by a newer version. Just dismiss the message.
4. Uninstall iTunes 11.4
5. Install iTunes 12.0.1 again. This time disc burning should be working.
(The prior installation of 11.4 fixes the issue)
I hope this works for you as well
Note
My iTunes 12.0.1 installation was a fresh one to start with. I am using the x64 version on Windows 8.1 x64.

"Disc could not be read from or written to." ?? :S

My computer died about 3 months ago for reasons beyond me so I got it fixed, i've finally bothered to download itunes again & it says "the iPod "Hayley's beast" cannot be synced. The disc could not be read from or written to."
I'm quite happy for it to just wipe my ipod so I can start again but it wont even connect. Then when I go to put music on it the same thing comes up. ummmmmmmm.
Help?

Welcome to AD!
Does it do anything differently if you reset that iPod while it's connected to your PC?
http://support.apple.com/kb/HT1320

HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

The disk could not be read from or written to----help please!!

Hey, I'm sorry if this has been posted numerous times, but I really need some help. Everytime I plug in my 30 gig 5thG ipod, I'll start to load songs on (either manually or automatically) and this message will pop up after about 50-100 songs have been loaded: "Attempting to copy to the disk, "ITIM" failed. The disk could not be read from or written to." This used to happen only once in a while, but now it's happening all the time. My ipod has no problem being recognized by itunes and the songs I have on it show up fine. It's a pain to load my library at intervals of 100 songs because I have about 6000 songs. I've also tried reseting my ipod several times, which doesn't seem to help at all. Any help would be greatly appreciated.

That article mentions other things also, like any anti virus software you may have. You could try turning it off.
It also mentions damaged song files.
In truth it could be a lot of things, and it's curious that you say this used to happen once in a while.
It could be also be a problem with the cable or even the iPod itself.
I take it you've tried restoring the iPod?
See: How to restore the iPod to factory settings.
I don't know what iScrobbler is, but any software can interfere with the workings of the iPod (delicate and fussy little creatures that they are).

"The iPod cannot be updated. The disc could not be read from or written to"

What do I do?!?! I sent back the first one coz there was a gap in the click wheel and it was possible to get the photos onto my iPod. Now...not so much.

Welcome to Apple Discussions!
See this...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

2G Shuffle error "disk could not be read from or written to"

Just recieved a 2G as a gift. First sync went fine. Songs transferred without issue. Wanted to change some settings and re-sync with new songs and got the error message "disk could not be read from or written to".
Have tried on an XP64 and a Windows 2000 machine with same error. I can sync from an XP Pro Laptop fine. All three are using the same driver (USBSTOR.sys).
Need some help trouble shooting this issue. The XP64 is my main computer and is the one I would like to solve this issue on. I also have a 30GB iPod that syncs on the XP64 machine with no problems.

I don't think the Apple store folks will be able to do anything because the issue is not with every computer.
The fact that I have a computer that can sync with the Shuffle without errors tells me there is an issue with the other 2 machines. As I cannot use the Laptop as my primary library I would like to solve the issue.
I still suspect either iTunes itself or the driver. If anyone else has any suggestions please share them.

Please help! iPod won't sync: "Disk could not be read from or written to."

I am at the end of my rope with the endless problems I've been having with iTunes and my iPod ever since the iTunes update which included Gapless Playback (a feature which now invariably crashes my entire computer unless I disable it quickly enough). My latest problem has now made my iPod completely useless because I cannot sync it with my music library. Every time it tries to update the songs, it either crashes or I get the error message "Disk could not be read from or written to." I have tried restoring my iPod, which seemed to work, except that after the restore function seemingly completed I still have the flashing Do Not Disconnect screen on my iPod (after about 30 minutes). I already tried synching my iPod while this was going on and I got the same disk error message. Please, please, can anyone tell me what on earth is going on? I've NEVER had problems like this and all of a sudden it seems like everything about iTunes is a complete disaster.

I had the same problem after I moved my library from my PC to my new iMac. It would not sync properly. After a day of thinking about it, researching it, and trying things like starring at the screen to see what song it failed on as it ran the auto sync (a suggestion posted on this site), a light bulb went off. Switch it to manual! If you manually manage the songs that sync it is easy to discover what songs fail. When auto sync is managing it, it jumps all over the place when synchronizing, but if you manually grab say 500 +/- songs at a time, it goes in alphabetical order, and you can see where it fails. It will be the track(s) immediately following the the last track that made it on the iPod. The songs that were corrupted for me played fine in iTunes, but would not transfer to the iPod, and they worked when I was syncing with my PC. Hmmm? I hope this helps.

Error:the ipod cannot be updated. the disc could not be read from or writte

May sound silly I am sorry, new to this. Just got an ipod shuffle and have gone through all troubleshooting suggestions ie: restore ipod, reinstall software etc. Am getting an error: "The ipod "administrator's ipod" cannot be updated. The disc could not be read from or written to". This occurs when I click and drag a playlist from the source section to my ipod in the source section. Getting a wee bit discouraged by reading all the problems associated with this ipod and am hoping for an easy fix to slide past further frustration. Please help. Thank you muchly.
Windows XP

Go to the iPod Shuffle Support Page, look around in there, and follow the troubleshooting steps in the article entitled "Can't be written to" or words to that effect.

IPod "could not be read from or written to"

Nano worked fine for a week, then refused to update with the message "attempting to copy to the disk "Bob's" iPod. The disc could not be read from or written to."
At the Apple store today, believe they just did a restore. I tried reinstalling the software, and then installed the 6/28/06 update. (Maybe a mistake based on what I now read.)
Anybody seen this message? Any ideas about how to fix?
Thanks
DELL Windows XP

Welcome to Apple Discussions!
Yes, I definetely know about what you are talking about when you say that you are getting the "disk could not be read from or written to" message.
Try the Five R's.
And, you probably need to restore your iPod now.
After you do that, here's an Apple Support article that explains the possible problems.
"Disk could not be read from or written to" when syncing iPod
I hope this helps!

Error Message 'Disc could not be read from or written to' HELP!!!!!

Similar Messages

Maybe you are looking for