Error message "disk is locked" when inserting blank DVD

My G4 is supposed to be able to burn a DVD, but when I insert the sample DVD that came with the computer when it was new, I keep getting the "disk is locked" message. It also happens with other DVD's that I bought specifically to use with the G4. I would appreciate your suggestions.
G4 Mac OS 9.2.x

VenturaGutek
Any optical drive software that is worth its salt should enable burning of data discs (4.7GB or 8.5GB in the case of DVDs) as well as of specialized file formats. That said, however, one of the commonest reasons for failure to burn, even failure to recognize an optical drive, is extension conflict. This was especially true of Roxio's Toast v5.x, when using which it was necessary to disable all Apple extensions, USB and FireWire, so that control of the drive could be taken by Toast extensions. I had to do this only recently to get a friend's LaCie DVD-R burner to be recognized as a DVD (rather than CD) burner by a B&W under OS 9.2.2, let alone to burn DVDs. That possibility was the reason for asking about your software. However, if you are using only Apple software, there should be no issue of software conflicts of this nature.
Without wishing or intending to fob you off, I suggest that you will get much more up-to-the-moment guidance from active fellow-sufferers than is likely in this antediluvian category if you approach them in the iDVD specialist forums, which are divided into iDVD 6, 5, and 4 and under.
Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT System 6.0.8 to OS 10.4.x

Similar Messages

Prevent iDVD opening when inserting blank DVD

How to prevent iDVD opening when inserting blank DVD. I don't see any preference page

System Preferences/CDs & DVDs:
Set the settings you want.

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

Why am I getting this error message, "Disk is too slow. (Prepare) (-10001)"

Hello all! I've been using GarageBand for a while now and I've accumulated quite a few files. Along with all of my movies and iTunes library, my internal hard drive filled up rapidly and I didn't catch it. I received a warning message on my screen one day saying that my hard drive was nearly full and I only had a few MB available. I'm using a 150 GB Solid State Hard Disk on my 2009 MacBook Pro (2.6 GHz Intel Cre 2 Duo, 4 GB of RAM). I remembered reading a while back that it's better to use an external hard drive for pretty much everything when using Garageband, so I bought one. I now have a seagate 500 GB, 5400 rpm external (USB 2.0) and I moved ALL of my movies and music over to it. I freed up around 60 GB of space on my internal hard drive in doing so.
So now that I've given you a little background, let me explain the issue I'm having. Before I noticed that my hard drive was full, I started receiving this error message:
Disk is too slow. (Prepare)
(-10001)
Upon receiving this message, I was unable to do pretty much anything in GarageBand. I couldn't listen to tracks, export to iTunes, or do anything! All I'm using GarageBand for is editing. My band and I do all our recording (and mixing) offsite at a separate studio and i just deliver a 2 track stereo signal (L/R) to my MacBook. From there, I just cut the individual tracks from a block of 30-45 minutes of recording because we just record our entire studio session and mix everything there. I pretty much never have more than two tracks and a few effects going at the same time.
After I realized that my disk was nearly full, I consulted my brother-in-law. He's head of the IT Deartpment at a major hospital here in West L.A. and he told me that I may have created a problem with the cache by filling up my internal hard drive and that I may still have issues with performance even after I free up space. He then told me that I may need to reboot my MacBook a few time to "free up the cache" (or something close to that, sorry guys I'm not that tech-savvy). It seems he may have been right, as I'm still experiencing the same issue. I rebooted around 10 times overall to no avail. I'm still using my internal hard drive to store the files that I'm working on (temporarily) because USB 2.0 is way too slow for my liking, when using GarageBand.
I've read quite a few articles on this offering solutions such as:
1. Do a complete Uninstall and Reinstall of GarageBand
2. Clone my hard drive to my external, format it, and reinstall everything back on it
3. Get a hard drive that supports Firewire 800 (The HDD I bought is USB 2.0, but it has two USB cables to increase speed, but I only have 1 port and I tried a powered USB Hub, but this HDD won't work with it for some reason).
4. Use different editing software.
5. Take it to Apple!
Will any of these things fix my problem? Are some better than others? Before I do anything, I wanted to ask this question on the furum to see if anybody had an easier (or cheaper!) solution. Any suggestions, tips, or advice would be much appreciated, as my band is starting to get on my case about finishing our CD! Thanks...

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

I have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help

i have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help

Hi Katy19831,
Thanks for using Apple Support Communities. These articles may help with the error you're seeing:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
- Ari

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

No Audio Playback due to Error Message "Disk is too slow. (Prepare) (-10001)"

Out of the blue, no audio playback. Was working just fine earlier today.
I repeatedly get the error message:
Disk is too slow. (Prepare)
(-10001)
NOTE: I have more than enough disc space. That is NOT the issue.
I also just got a second error message:
Part of the Project was not played
This project has too many real instrument tracks to be played in real-time. To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
NOTE: Odd as I have only 2 tracks in the GarageBand file.
Any others experience this? Suggestions?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Error message to be thrown when multiple enteries are not entered

Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.

No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif.

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Error message "Unable to lock resource channel ' BTS '"

i have a solution which use Biztalk 2010 and Dynamic AX 2009. recently the Biztalk server always raise error:
Error message "Unable to lock resource channel '<BTS>'".
the Biztalk can not receive message from Dynamic AX and the message in queue of Dynamic AX also can not be sent out. what i know to do is that stop biztalk server and delete the lock data from Dynamic AX,then start biztalk server.
what i want to know is why it happen? is it a Bug? how can i solve it?

Hi,
There is a hotfix available to fix this issue, which updates the AX BizTalk Adapter and Schema assemblies.
If you are running Microsoft Dynamics AX 2009 RTM (Build v5.0.593.x), the fix is included in AX 2009 RTM Hotfix
Rollup 4 Kernel.
If you are running Microsoft Dynamics AX 2009 Service Pack 1 (Build v5.0.1000.52 or v5.0.1500.x), the fix is included in AX 2009 SP1 Hotfix
Rollup 6 Kernel.
NOTE: To
check the version of the AX server version in use, find AX32SERV.EXE on your AOS servers, and chek the file properties.
For detailed steps refer:
https://social.msdn.microsoft.com/Forums/en-US/f4633ce4-7c77-402b-8b9c-6669ff392077/error-message-unable-to-lock-resource-channel-ax-channel-name?forum=biztalkr2adapters
Rachit

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

Error message "disk is locked" when inserting blank DVD

Similar Messages

Maybe you are looking for