Error message downloading j2se 1.5.0 on windows XP home edition (SP2)

Hello:
I am getting the following error message attempting to install the j2se 5.0 on my windows XP home edition (SP2):
"Error JavaTM installer
The installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version please check http://java.sun.com/j2se to determine if it is still supported. If so please try installing at a later time as these file might be only temporarily unavailable."
There is a bug report:
Bug ID: 6237992
Tested Bundle: 5.0u2_b09 JDK iftw on staging site
http://webwork.sfbay/j2se/1.5.0/download.jsp
Tested O/S: XP-Home (sp2)
Problem:
The installer throws error messages. I tried on three different
XP-Home (sp2) machines in our lab. It throws error message the very first or second time and after that, it seems to work fine.
Steps to reproduce:
1) On XP-Home(sp2) machine, try to download and install the JDK iftw bundle from
http://webwork.sfbay/j2se/1.5.0/download.jsp
2) During the installation the first or second time, one of the following messages thrown:
A) "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
B) Error - Java Installer
"This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to determine if it is still supported. If so, please try installing at a later time, as these files might be only temporary unavailable"
This problem seems to occur on XP-Home(sp2). When error message pops up, keep trying it, it 's eventually OK. It may confuse consumers at the first two times.
xxxxx@xxxxx 2005-03-09 05:11:47 GMT"
I have tried the downloading five times to no avail, both by double clicking, and using the windows run utility. Any ideas would be greatly appreciated.
Thanks

I am getting the same error when opening the J2se Development Kit 5.0 Update 8 after I press the Run button. ( "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package").
Is there a solution ?
Thanks,
Luck 08/21/06

Similar Messages

Using Firefox 7.0.1 & am trying to clear cache, because Firefox crashes during online college courses (Firefox 3.0 or higher is a supported school browser), and I keep getting an error message about 'Quick Time.' Using pc - Windows 7 Home 64 bit.

As soon as I open up Firefox - it crashes on me. It takes me at least two or three attempts. I downloaded Firefox from the Firefox website and also use it for Facebook. I am wondering if it is because I also alternate between using IE as well? While attempting to open my school e-text, a message popped up that if experiencing problems opening my e-text - then I should clear cache and cookies which I cannot do - because of the "Quick Time error message."

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

When installing CC, I recieve error message 'Download error.Please contact custumer support"

today I'll try to install Adobe CC, so I recieve error message 'Download error.Please contact custumer support". I've search on the internet,and nothing was helpful.

You can perform steps from beginning one more time.
1 )Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list , locate Adobe Creative Cloud and uninstall the same.
2) Navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3) Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Important : Disable AntiVirus and Firewall temporarily.
Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://creative.adobe.com/products/creative-cloud
Once the installation process is completed, try loading Apps tab and check,
Still face same issue , create new Admin account on your Windows computer and launch Creative Cloud desktop app and try loading Apps list.

HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Just installed Outlook 365. Now getting an error message downloading pdf's from outlook re: licensing on my acrobat 9 standard

Just installed Outlook 365. Now getting an error message downloading pdf's from outlook re: licensing on my acrobat 9 standard. 148:3

OFFICE 365 is a cloud version of OFFICE 2013. Full compatibility with Acrobat requires an updated Acrobat XI. You will likely have to store the file and then open in AA 9. To create a PDF you will have to print to the Adobe PDF printer or use the MS plugin that has several issues.

Error Message Download.exe file linked to .....

Receiving error message "Download.exe flile linked to missing
export Kernel32.DLL:VerifyVersionInfoA.
Any tips on how to correct so I can continue download
process? Many thanks for any help.

m getting same message trying to upgrade to 9, and now I
cannot see any Java windows at all
PLEASE help

HT1657 error message downloading rental movie

I get an error message downloading a rental message from Apple TV, can someone please help me what to do next?

Welcome to the Apple Community.
Check out the section on error codes in this article.
Advanced iTunes Store troubleshooting

ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks much

I know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

Error Message Displayed while executing FNDLOAD Command in windows machine

Hi,
I am getting the following error message while executing the FNDLOAD Command in Windows Machine. Can any one give some clarifications to solve this issue.
FNDLOAD Command Used:*
+./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO
Error message Displayed for above command:_
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator
Let me know the solution this issue
Regards
Arif Mohammed

Hi Hussein,
Thanks for your response, Let me explain in detail that the error I am facing while running FNDLOAD Command.
I have executed the below command in CYGWIN which results in error while calling FNDLOAD.
*$ java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD apps -JDBC_CONNECTION 16.89.26.52:1521:OA10 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME PO -LCT_FILE $XDO_TOP/patch/115/import/xdotmpl.lct -LANGUAGE en -TERRITORY US -LOG_FILE SHW.log;*
I got the below error message while executed the above command (Highlighted in BOLD):
$ cat SHW.log
XDOLoader started: Tue Nov 15 20:27:18 PST 2011
Parameters passed to XDOLoader...
[TERRITORY] [US]
[DB_USERNAME] [apps]
[LCT_FILE] [C:\oracle\vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct]
[DOWNLOAD] [DOWNLOAD]
[JDBC_CONNECTION] [16.89.26.52:1521:OA10]
[LANGUAGE] [en]
[DB_PASSWORD] [apps]
[LOB_TYPE] [TEMPLATE]
[LOG_FILE] [SHW.log]
[APPS_SHORT_NAME] [PO]
Start downloading...
Downloading files from XDO_LOBS: SELECT FILE_DATA, LOB_CODE, LOB_TYPE, APPLICATI
ON_SHORT_NAME, FILE_NAME, LANGUAGE, TERRITORY, XDO_FILE_TYPE FROM XDO_LOBS WHERE
APPLICATION_SHORT_NAME = :APPS_SHORT_NAME AND LOB_TYPE in (:TEMPLATE, :TEMPLAT
E_SOURCE) AND LANGUAGE = :LANGUAGE AND TERRITORY = :TERRITORY
Downloading files from XDO_LOBS: SELECT L.FILE_DATA FILE_DATA, B.TEMPLATE_CODE L
OB_CODE, L.LOB_TYPE LOB_TYPE, L.FILE_NAME FILE_NAME, L.LANGUAGE LANGUAGE, L.TERR
ITORY TERRITORY, L.XDO_FILE_TYPE XDO_FILE_TYPE, L.APPLICATION_SHORT_NAME APPLICA
TION_SHORT_NAME FROM XDO_TEMPLATES_B B, XDO_LOBS L WHERE B.APPLICATION_SHORT_NAM
E = :APPS_SHORT_NAME AND B.TEMPLATE_CODE = L.LOB_CODE
Generating LDT file: xdotmpl.ldt
Calling FNDLOAD: FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD C:\oracle\
vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS
APPLICATION_SHORT_NAME=PO
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator.
The SQL statement being executed at the time of the error was: and was executed
from the file .
Generating DRVX file: xdotmpl.drvx
XDOLoader done successfully: Tue Nov 15 20:27:30 PST 2011
$
So i decided to run the FNDLOAD Command alone in CYGWIN which is highlighted and still im facing the same issue but if i run the below command it works fine and getting download.
*./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO*
Hope you understand the problem which im facing. Let me know some solutions from your side to solve this issue.
Regards,
Arif Mohammed

On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

I know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

I am receiving an error message from another software (Epub Ultimate) stating: "Authorize Adobe Digital Editions to Generate an AdeptKey". How do I do this?

I am receiving an error message from another software (Epub Ultimate) stating: "Authorize Adobe Digital Editions to Generate an AdeptKey". How do I do this?

See here:
How do I remove older versions of Photoshop?

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark

Error message downloading j2se 1.5.0 on windows XP home edition (SP2)

Similar Messages

Maybe you are looking for