Error Message during Import of Photos into Movie????

I am having problems importing photos into my movie. Once I have dragged the photo into the desired position in the clip viewer it comes up with an error message - "Error during Import - the file could not be imported (-33)"
I am importing from an album in my iphoto with the Ken Burns Effect on. Even with the Ken Burns effect off, the same message appears
Any help or suggestions would be greatly appreciated
Thanks

-33 means "directory full", which means there are too many files in a folder.
iMovie supports up to 999 photos in the same project. If you have less, there is a problem with your hard drive. Boot from you OS X install CD/DVD and run Disk Utility to repair your hard drive.

Similar Messages

Error message when importing CD's into iTunes.

I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

Iron-Mike wrote:
Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

Error message when importing motion files into FCP

In FCP.
I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
I go back to the training file to try the same procedure and it works fine.
Go back to my own project and it doesn't work.
Any ideas? Anyone?
I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
Also working with universal software for FCP studio.
Intel 2.66GHz Mac OS X (10.4.9)
Intel 2.66GHz Mac OS X (10.4.9)

OK???
Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
Thank You Again!

Strange error message when importing one schema into another

Hello,
using Oracle Workshop for Weblogic 10.3, I am trying to define a new schema A which imports the namespace of an already existing schema B. The schema validator states that schema B is valid.
However, when I try to add an import directive in the design view and try to select schema B as the schema location I get the error message that B.xsd is an invalid schema file. When I manually add the import directive in the source view, I can refer to all elements of the namespace defined in schema B. Unfortunately, schema A now is marked as invalid with the error message "The dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."
Even external schema validation tools do not find any validation errors in schema B.
Any ideas?
Kind regards
Alexander

The dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."http://forums.oracle.com/forums/thread.jspa?threadID=1048184&tstart=0
Regards,
Anuj

Putting video clips (mov) in to edit work place time line after photos (jpeg) getting error message, the importer reported a generic error. ? please help thanks

premier elements12, putting video clips (mov) in to edit work place time line after photos (jpeg) error message, the importer reported a generic error. ? please help.

TINA54
Thanks for the reply.
Some general comments...
Regarding:
THERE ANY WAY I CAN PUT MULTIPLE RANDUM TRANSITIONS IN TO THE TIME LINE WITH JUST ONE CLICK ? .
There is no transition choice for random transitions across the Premiere Elements 12 workspace Timeline. But, the Elements Organizer 12/Create Menu/Slideshow and its Slideshow Editor does have that random transition choice. So, one possibilitity would be to create your slideshow in Elements Organizer 12 Slideshow Editor and then move the slideshow into Premiere Elements with the Output of Edit with Premiere Elements Editor command.
Pending more details of the slideshow you are creating, I think that you would get your best photo quality and overall results staying with Premiere Elements 12 workspace (1080p) project and the transitions randomized manually.
perhaps applying the default to all (all at the same time),
using Timeline Menu/Apply Default Transition,
and then replacing transitions randomly for the random transition look).
Please let us know if any of that worked for you.
Thanks.
ATR

ERROR message! importing Motion files back into FCP. please help.

ok...so i started my project, everything worked seamless from fcp to motion and back...and then bam! error: 1 file recognized, 0 access denied, 1 unknown. ive done everything that i know, ive reinstalled, fcp studio and operating system...ive been over every setting...ive deleted preference files, repaired permissions... now my old motion files that were created before the error message still import just fine...can anyone help? i hate to outsource something i can do myself...
thank you.
gdh

Have you tried changing the extension on the motion file? You can label it .mov and see if FCP recognizes it then.
Andy

I tried to import some photos into iPhoto today and was given a messaged indicating I'm out of room?! I only have 11,800 pics in my library and have been told iPhoto can hold up to 250,000. Help!

I tried to import some photos into iPhoto today and was given a messaged indicating I'm out of room?! I only have 11,800 pics in my library and have been told iPhoto can hold up to 250,000. Help!

Command (right) - click on your hard drive icon on the Desktop and select Get Info from the contestual menu:
In the window that comes up will be the amount of available(free) space:
OT

"An Error Occurred During Import"

I am importing video from a Canon Vixia HF10 HD CMOS camcorder into iMovie 08. After the thumbnails are created, I select the clips I want and click on Import. I tried in a a Large (960x540) and Full (1920x1080) format and receive the same error message - "An Error Occurred During Import." I am then instructed to check the footage carefully and try again.
What could be causing this error?

I had exactly the same problem in loading files from by HF10 onto my iMac but I didn't have the same problem on my Macbook. So I tried to copy the clips from my Macbook onto the iMac but imovie on the iMac wouldn't recognise them ...
This suggested to me that the problem was with the Imac's version of imovie being unable to read the file types from the HF10.
I had, in parallel, been trying to fix an error shown when iMovie on the imac starts up :
"The QuickTime components necessary to view, edit, import, and export several kinds of movies are not installed. These components are included with the iMovie installer; please re-install"
The discussion and solution to this problem can be found under the "Missing QuickTime Components" discussion on this site however to save you time I have copied below fgalvani70's solution (Bravo !) which works perfectly ... both the missing component issue and the import issue are now perfectly resolved !!
1 - install software Pacifist (http://www.charlessoft.com/) (it's shareware but you can use without problems)
2 - Insert Original Apple installation disk
iMovie '08 missed a Quicktime Component called: “AppleIntermediateCodec.component”. This component is necessary for importing movies in iMovie 08.
So, just let Pacifist read the Install DVD and extract only the ‘AppleIntermediateCodec.component’ to the default directory.
It's under Contents of BundledSoftware.mpkg -> Contents of AppleIntermediateCodec.pkg -> Library -> QuickTime
Select AppleIntermediateCodec.component and click Install

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Suddenly can't import any photos into iPhoto!

Suddenly and inexplicably, I cant import any photos into my iPhoto program. iPhoto has worked fine for years. Now, all of a sudden, no matter how I try to import them (either from my desktop, or from my digital camera), I get the error message: Couldn't create: /Volumes/name of external drive/iPhoto Library/2006/08/21/name of photo. When I click "OK" on the error message dialogue box, I then get the error message "Unreadable files: 1 The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)." I am reasonably certain that of the 250 or so J-Peg photos I'm presently trying to import, from 2 different cameras, ALL of them can't be corrupt.
First, I tried repairing my disk permissions on my G4. Then, I tried reinstalling iLife 5.0.2. Then I tried reinstalling the OSX 10.3.9 combo pack, and iPhoto 5.0.4. Then I tried again repairing my disk permissions with disk utility. All proved useless to solve the problem.
I also tried dragging my iPhoto preferences to the trash. But I found to my horror that this action completely obliterates all of my iPhoto albums and photo groupings. I did not attempt to import any new photos once I discovered this, as I was fearful doing so might render my loss of my albums permanent. So I retrieved my old preferences from the trash, thus saving my albums and groupings, but also keeping the original importing problem.
What can I do to fix this importing problem without obliterating my albums and groupings? Lots of work has gone into the grouping and categorizing of my albums and photos. Though it would be easy to reimport all of my photos, I would not want to begin to take the time to recreate all of my albums and groupings from scratch. Is there any way these groupings can be preserved? If not, there should be! It's idiotic to think that Apple might not consider all of the time the grouping of albums and songlists represents to the typical user of iPhoto or iTunes.
Any help you can give would be greatly appreciated. Cheers!
Powerbook G4 (2002) Mac OS X (10.3.9) iPhoto 5.0.4
Powerbook G4 (2002) Mac OS X (10.3.9)
Powerbook G4 (2002) Mac OS X (10.3.9)

I've found a solution to this problem, thankfully. But it didn't come via rebuilding the iPhoto library.
I didn't want to to a manual rebuild of my original iPhoto library, since I was cautioned that it would involve losing my albums and all notations and filings I'd made concerning my photos. Before I first tinkered with the library, I made a backup copy of the original-defective library onto another external drive. Then I did one more complete "automatic rebuild" of the original/defective library, and found to my horror that the library wouldn't even open any more. It would send up an error message when I'd try to click on it's icon to open the library.
I went back to the backup copy of my iPhoto library (containing all of my albums, groupings, and etc.) and did what I hadn't thought to do in the first place: I simply attempted to import photos (my original difficulty) into this backup iPhoto library. It worked perfectly!!! All photos imported into this backed up copy as if it were the original. And now that I have trashed my "original" and totally defective former iPhoto library, this backup copy is now my new iPhoto library.
I guess whatever was wrong with the old library was shaken out just by making a backup copy. I'm afraid that's about as technical an explanation as I can offer. But maybe doing the same process will help another of you suffering from a similar problem with importing photos. Anyway, a hearty thanks to everyone who responded to this original query of mine. Mac users are truly the best!!! Cheers!

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Cant take pics any more, error message sez "CANNOT TAKE PHOTO"

cant take pics any more, error message sez "CANNOT TAKE PHOTO there is not enogh available storage to take photo. You can manage your storage in Settings." but then I go there and cant do anyhting...?
I believe I have backed up all photos to my computor and I even just now bought more icloud storage for $20.00 a year and still nothing....?
I cant find a way to delete camera roll....?

Guess what? The folks responding to you here are all just users like you, we don't work for Apple, so, you know, your pain is of little interest.
This has been the cause of your problems:
I checked in Iphoto preferences and the box to automatically import photos to Iphoto was unchecked.
What that means is you have connected your camera and iPhoto has imported references to your photos - links, in other words. It did not copy your files into the Library.
Then you took away the camera.
Now iPhoto is looking for the pictures.
You'll need to import the images again - but if you do you'll have masses of duplicates. So, trash the existing library, create a new one and start over.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

Error occuring during import of certificate for SSO configuring in BI

Hi,
I am configuring the SSO with logon ticket for BI system.
I downloaded the certificate from portal server.
But while importing this certificate on R/3 server it shows error
"Error occurred during import"
Message no. TRUST008
Please suggest me any solution on it.
Thanks & Regards,
Vishal.

Hi Vishal,
Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
Hope it helps
Detlev

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

Error Message during Import of Photos into Movie????

Similar Messages

Maybe you are looking for