Error Message during posting return delivery against materil document

Dear experts
I have created a purchase order with batch specific unit of measure KAI.
I created the inbound delivery document (say for eg: 30,000 KG)
I have taken GRN for the above IBD through MIGO transaction with 101 movement for all 30,000 KG.
Later i have posted the return delivery 122 movement with reference to above 101 material document. 30,000 KG
After this i realized that i need cancel the 101 movement document.
So cancelled the 122 movement document, and try to cancell the 101 material document.
Then system is issuing error message VLA 321 "Movement type 102 cannot be used here".
Also if i again want to post return delivery to send the stock back, then also i have error message. but this time it is VLA 319
"Return delivery qty greater than previously GR-posted qty:"
My Support package for SAP_APPL, relese 600 is SAPKH60019.
Please suggest me solution to fix these errors as these are not relavant for the situation.
Regards/Murali

Hi,
Can you please check this note...
Note 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
Note 1342935 - Error message BORGR 623 during GR reversal in MIGO
Regards
Bhuban

Similar Messages

Raising Custom error message during posting

Hi All,
I have a requirement , while vendor/customer posting (Say in FB01 one will be Vendor line item and other will be GL line item). If the user enters the GL line item first then it should throw an error and should not allow the user to post the document.
Please help me how to achieve this.
Regards,
SK

Hi,
You can achieve this through Validation. Create a validation in GGB0
Create Validation
prerequisite: Transaction code = (give the transaction code that you want) FB01 and Line Item = 001
Check: Posting Key= Vendor posting key or Customer posting key
Message: Enter Message type as E
Message number: 001 (for eg)
Message text: Entry allowed only for Vendors/ customers or what ever text ou want to give you can enter.
For message number and text goto SE91 and select the message class and then change
Select the next free number and enter the text.
Regards,
B. Radhika.

Error while posting return delivery to backend system

Hi All,
We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
Thanks
Siddarth

Hi Siddarth,
Please implement the note below, which is included in SP05.
2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
Regards,
Wendy

K8N DIAMOND Plus Error(?) message during post.....

I know some of the DIAMOND PLUS owner have gotten this...it appears at the bottom of the screen, only when both SATA controllers are enabled and a drive plugged in to both:
"NOT ENOUGH SPACE TO COPY PCI OPTION ROM [00:13:00]"
Has there been any answer or resolution to this? Or does anyone know what it means??

Rocketman18,
I have scene that error message when I first start being up my Diamond Plus. It never seamed to have any effect on the system or its function and after one of my first real completed BIOS Clears procedures it never came up again. I think it is one of those undocumented BIOS parameters gets trash in it that causes the unused error message to be displayed. I contacted MSI Support and that is when they sent me the V1.16 BIOS was to clear that error message and a few other ones weird error message during boot. I think if you will take the time to do that supper BIOS clear procedure I have been trying to get you to, but you never seam to get around too.
Here is the procedure again if you want to try it, now.
This procedure insures the there is no power let in the system to defeat your attempt to clear the clear the BIOS parameters.
(1) Unplug the AC Plug cord from the computer.
(2) Remove the Battery. If your like me and has always struggled with get the little battery out when buried behind and under cables in between I/O cards. Get a small pair of needle nose priers and press the two metal tabs together that make up the retaining clip. Now this first time you do this it will surprise you, because if there is nothing it its way the spring contact behind it will pop it out with enough force to send it flying. If you power supply is mounted in the bottom of your case, put paper over the grill, because if the battery goes in there you are in for at lest 12 pack day.
(3) With power, unplugged and the battery remove press the BIOS clear button and the Power switch and holed them for twenty to thirty seconds.
(4) Then, let the system set for as long as you have patience, at lest thirty minutes.
(5) Again, press the BIOS clear button and the Power switch and holed them for twenty to thirty seconds.
(6) Reinstall the battery and plug the power back in.
(7) Boot the system to the BIOS to BIOS Default Values, Save and Exit.
(8) Reboot to BIOS Setup Routine and Set all Bios parameters to the normal system operating parameters, save and exit.
Note: Do not setup your system for any over-clocking, but check you memory default setting to insure the BIOS is setting them correctly. Mine sets the default memory voltage to below the manufactures spec.
(9) Reboot the system to the BIOS setup routine, YES again, rechecks that all of you normal system operating parameters are still correct save and exit.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR

Hi,
I have to import composite role from development to QAS system.I have generated profile for each role in developemnt & create transport of composite role & moved it in QAS.But in QAS it finished with Return code 8 & I found profiles are not moved in QAS for all single roles.
Error is as follows.
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Please advice if anybody faced such kind of issue.
Regards
Santosh

Rephrased a'la Julius:
> To avoid the problems during the subsequent import into a target client, the AGR_NUM_2 table can be maintained as customizing for the clients (plural) in the source development system where the roles are maintained. If more than one client is used for role development, a number range gap of 50000 between the clients should be sufficient to prevent profile name collisions (otherwise you have much bigger problems anyway...).
>
> This is because the system ID (sy-sysid) is used as an attribute in the generated profile's name, but not the client (sy-mandt). > The value set in the AGR_NUM_2 tables determines the current number per client of the next sequential number to be used for profile generation. The customer can initialize this number to insert an additional attribute per client to achieve unique generated names within client specified ranges.
Something like that
Cheers,
Julius

Error when entering a return delivery

We are using SRM version 5 extended clasic scenario
When trying to enter a return delivery against an order the user get the following error
"return delivery quantity for order item exceeds delivered quantity"
The user gets this error as soon as they select the "return delivery" option and are not permitted to change the quantity returned.
Any suggestions on how to proceed welcomed!
Cath

Hi
when you do a return delivery, system seems to be proposing the whole quantity in return delivery and your GR seems to be with a lower quantity.
Return delivery should be proposing the quantity in GR ...Is this an SRM PO or a backend PO
Refer to the oSS Note - 1411808 which will apply a correction in FM BBP_BE_PO_GETHISTORY. Remember this note is applicable only if you have applied OSS Note 1381757 or you are on Support pack SAPKIBKT16
lt_be_poacc[]    = st_be_poacc[].
        lt_be_posched[] = st_be_posched[].
        lt_be_pohist[]   = st_be_pohist[].
*>>>> START OF DELETION <<<<<
        lt_be_pohist[]   = st_be_pohist[].
*>>>> END OF DELETION <<<<<<<
*>>>> START OF INSERTION <<<<
        lt_be_pohistt[] = st_be_pohistt[].
*>>>> END OF INSERTION <<<<<<
Regards,
Virender Singh

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

Error occurred during post handling RS_AFTER_IMPORT for UPDR L

Hi friends,
I need your help for 2 issues related to transport
I am getting error while transporting the request from BW DEV to BW QAS..Please help me regarding this issue..
1.)Error occurred during post handling RS_AFTER_IMPORT for UPDR L
       The errors affect the following components:
      BW-WHM (Warehouse Management)
2.)Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
       Error when activating update rule
       IC=0CRM_PROD IS=0PR_IL_PROREF_ATTR error when checking update rules.
Friends these are the two issues im facing while doing the transports._i have checked the update rules in the BW DEV it is working fine._please give some solutions to overcome this issues.
Thanks
Gnana Baskar

Hi Gnana,
Since u r telling tht the update rules are working fine in the Dev system, request u to perform some checks:
1. The Update rule needs to be in active version.
2. The InfoObjects used in the target InfoProvider should be present in the QA system/attached to the request in which u r transporting the changed Update Rule.
3. Manually add objects, if needed all the Before/After objects in the new request and reactivate the Update rule, if it asks for a request give this new request number.
4. Compare the data model in Dev and QA system and try finding the disconnect between them.
Hope this helps.
Regards,
Kunal Gandhi

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Error Message during posting return delivery against materil document

Similar Messages

Maybe you are looking for