Error message during TO creation back ground

Hi All,
  We have configred the movemet type 309 and 321 with auto matic TO creation, after that we have schuduled a job (with program RLAUTA11)to create TO automatically , but for some of the posting changes TO es are creating automatically, but some of the posting changes TO are not creating and in the job log we found the error message"No quants exist for posting changes"  message no : L3 094.
Could any one please kindly show the resolution for this issue.
Thanks & Regards,
Murali.

Short Text
No quants exist for posting changes
Diagnosis
No quants requiring a posting change were found.
Procedure
Check your entries.
If memory serves, there is some called "quant" that is used in the TO creation. Obviously, with the quant that you have specified for that TO, nothing can be done. This is not exactly an ABAP question, you might need to ask your MM/WM consultant.
Additionally, you may use "where used" feature in SE91 to find where in the programs this message occurs and what validations happen before that.

Similar Messages

  • Error message during cube creation

    Hi expert,
    System show the following error message during cube creation, please info how to solve this problem. Thanks.
    Define the characteristics of the validity table for non-cumulatives
    Message no. R7846
    Diagnosis
    The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
    Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
    Examples of such characteristics are:
    A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
    the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
    Procedure
    Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
    In the example above, the characteristics "plan/actual" and  "plant" must be selected.
    The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

    Hi,
    Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

  • Warning message instead of error message during PO creation in QM in procurement

    Hi,
    I activated QM procurement for a material and put a control key with delivery release, certificate required and invoice block....Now for that material, vendor and plant combination created QM info record and put some release qty...Now after the release qty is reached then when I am making next Purchase Order system is throwing warning message instead of error message and allowing me to create PO...where I need to convert the warning message to error message...
    Thanks
    Kumar

    Hello Kumar,
    Never tested this ;
    Anyways, Set Message control for lock as "Defects" for respective Control key.
    Path: QCC0>QM in Logistics>QM in Procurement>Define Control Keys.
    Amol.

  • Analysis Services failing to Start . File system error: Error occurred during the creation of directory

    Hello All,
    Posting this problem here and hoping for a solution from the experts in this forum.
    When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
    "The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    When Checked the Event Viewer i see the following error -
    The service cannot be started: The following system error occurred:  The filename, directory name, or volume label syntax is incorrect.  File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
    Backup'.
    I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
    Let me know if you need any more details
    SG

    Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
    succeed.
    http://artisconsulting.com/Blogs/GregGalloway

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • Error Message During Vista Install W/ Bootcamp

    I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
    Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
    I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
    Please HELP! I need my vista installation up and running for work!

    "but when detecting hard drives, nothing shows up in the list."
    I don't really understand that statement as without any drives showing up how were you able to even start the install?
    At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

  • Error message during install

    Anyone have a clue what to do?  Keep receiving error message during install.  Have disable firewall, no help.  Here is the error message:
    Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
    HRESULT:0x8007054f
    I uninstalled because Itunes would not upgrade.  Now I can't install.  I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing.  I would appreciate any help.
    Thank you.

    Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
    Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
    Find music: http://support.apple.com/kb/TS1408
    You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
    I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
    They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
    Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

  • Error message during processing in BI

    1.i am loading the data into infoobject.
    2.got error in text data load.
    3.master info object have compound obj 0COUNTRY
    4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
    5.there is no PSA in this..its direct update to INFOobject.
    The error message is:
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update
    Diagnosis
    There are duplicates of the data record 2. with the key '3.' for characteristic 1..
    Procedure
    If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

    Hi KP,
    In the details tab,
    1.under Transfer (IDOC and Trfc):
       Data Package 1 : arrived in BW ; Processing : Error records written to application log
    2.Processing (data packet): Errors occurred
       Update ( 0 new / 0 changed ) : Errors occurred
       Error records written to application log
       0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
       0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
       Error 4 in the update
    3. Process chain error
    these are the error details.

  • HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    See:
    iOS: Troubleshooting backup issues in iTunes
    Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

  • Error message when trying to back up iPhone in iTunes

    I am running the latest version of iTunes (12.1.2.27) on Windows. I have a iPhone 5s running iOS 8.3. When I connect my iPhone to my PC and select "Back up Now" under "Manually Backup and Restore" in iTunes it will start the backup but then come back and show the error message "iTunes could not back up the iPhone because an error occurred". It doesn't specify what that error is. I tried rebooting my PC and restarting my iPhone and reconnecting, but I am unable to backup my iPhone and keep getting the same error message. I suspect this might be an issue with with either iTunes 12.1.2.27 or iOS 8.3 as it started to happen after I updated both of them.  Anyone have any ideas?

    You can try going to iTunes with your device connected, select your device, then click view, show duplicate items

  • I am getting error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone".  I have deleted the backup and restarted my computer, but continue to get this error message.  What do I need to do now?

    I have recently updated my phone and am attempting to sync it.  I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone".  I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message.  What do I need to do now?

    iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
    Mac:~/Library/Application Support/MobileSync/Backup/
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • I want to backup my phone before upgrading to ios5 but I get an error message itunes could not back up the iphone because a session could not be started with the iphone. Please help me..

    I want to backup my phone before upgrading to ios5 but I get an error message: itunes could not back up the iphone because a session could not be started with the iphone. I want to go to ios5, but I do not want to lose everything. I've gone to my device under preferences and I have no backup currently.
    I have a Verizon Iphone 4 and a PC.
    Please help me..

    Hi Judy,
    Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
    Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
    VBR,
    ray

  • HT201210 error message: itunes could not back up the iphone "..." because the backup session failed.  I don't know what to do to fix this problem?

    I keep receiving the error message: itunes could not back up the iphone "....." because the backup session failed.  Can anyone advise me on what I can try doing to fix this problem?

    This Apple article talks about backup issues -> iOS: Troubleshooting backup issues in iTunes
    Are you able to backup if you move the previous backup from the location below to the desktop?
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • I deleted the backup on itunes, synced again and got the error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone

    I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again,  there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.

    babesharon
    I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences.  I have vista so I went to
    C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is).  If you have a different OS search the apple website for the backup location.
    I reopened iTunes & Synced with out a problem.  I also got the update to install.
    Good luck.

  • I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    The solution will be found here, select your computer type and software.
    http://support.apple.com/kb/TS2529

Maybe you are looking for