Error Message Employee Group must be 9 and Subgroup can only be- Terminatio

Hi Gurus,
I am trying to execute the Action Termination with action reason 71- Retiree normal.  In the Actions infotype IT0000.  I am getting the below error.  I have checked all the configuration checked T529A, T503*, T528B etc...  All are maintained correctly.  When trying to execute with other action reason it is getting saved.
Employee Group must be 9 and Subgroup can only be
    Message no. Z7016
Appreciate help from any of the SAP Gurus.
Thanks
Naveen Avalur

Hi Donnie,
Thanks for your quick turnaround.  The answer was very helpful.  We are working along with our programmers.
Will let you know if the solution is found.
Thanks
Naveen Avalur

Similar Messages

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • When i try to download, i get an error message saying unsupported language.  It says it can only download in English, English is my language.

    When i try to download, i get an error message saying unsupported language.  It says it can only download in English, English is my language.

    What exactly are you attempting to download and where are you located in the world?

  • Why do I receive "4.3.2 connection rate limit exceeded" error message using the mail merge extension and what can be done about it?

    I am using TB 31.3.0 with Mail Merge 3.9.1. I routinely send an email to 435 members of an volunteer emergency responders group that I coordinate. I do so using a .csv list with mail merge. While there were no problems in the past, more recently the mail merge function will hang after sending a varied number of messages successfully and I get the following error message:
    "An error occurred sending mail. The mail server sent an incorrect greeting: 4.3.2 connection rate exceeded.."
    There is an "OK" button in the error message pop up that can be clicked to resume the mail merge process. It would appear that if I click the "OK" button immediately whenever the error message is received I must do so frequently and some members do not receive their email. If I delay clicking the "OK" button, I found that I only needed to click the "OK" button twice to send to all the members.
    An on line search suggests this is the result of some sort of throttling by my ISP, Sonic.net. There is also this comment: "If you are receiving this error, you are likely using mailing list software which cannot decipher the temporary fail codes. If so, you will need to set your software to slow down its delivery rate and/or reduce the number of active connections per remote host."
    I am not super technical. Is it realistic to think that I can tweak mail merge to that I do not have to babysit my email to this group?

    then I suggest you send using a mail provider that is not actively trying to block your outgoing mail. Or use a yahoo / google groups mailing list feature so you only send a single mail.
    Or use a free account from the likes of http://www.ymlp.com/ who limit free account mailing lists to 1000 subscribers. ( Googled them this morning)

  • I keep getting an error message when I log onto Firefox and I can't figure out how to fix it, can you help?

    Every time I log onto Firefox I get the following message:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
    I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
    I am running Windows 7 - 64 and am using Avast Internet Security 2013.

    The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
    This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

  • When i do initial set up w creative cloud set uo wont run send error message"installer failed to initialize" why and how can i get pass this

    When I do initial set up with creative cloud set up it wont run a send error message "installer failed to initialize" comes up. Why and how can I get passed this?

    Error "Installer Failed to Initialize" | Install desktop application | Windows

  • Error message says "This page requires a plugin that can only run in 32-bit mode"

    When I try to write an email from my BT site I get the following message
    "This page requires a plugin that can only run in 32-bit mode"
    Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
    I have only had this problem since updating to the latest Firefox

    Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

  • I keep getting error message saying application did not initialize and I can't get on the internet with mozilla at all

    when I click to open the internet through Mozilla Firefox, I get this message; "The application failed to initialize properly (0xc0000006). Click on OK to terminate the application."
    When I do this, I have to click on it twice before the box goes away. I still can't access the internet through Mozilla.

    Well, if they are private range IPs it does not make any difference. Everybody use them.
    Anyway hide any personal information.

  • Error message says computer must restart o complete upgrade of Firefox, but has been restarted many times, and won't uninstall.

    The user on whose machine this problem exist does not have administrator rights. Firefox version 5 detected an upgrade (to version 17) so she allowed it to continue. It didn't work, but since then Firefox has not worked at all. It displays an error message" Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to restart now. " I was able to remove version 17 using Windows Add/Remove programs, but Add/remove programs show an installer, icon, not a normal Program icon. The machine is a HP8000 running Windows XP SP3

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
    #Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
    '''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
    After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
    * '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
    * '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
    #Go to the Windows Start menu and click on "Computer".
    #In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
    #Find the "Program Files (x86)" folder or "Program Files" folder.
    #* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
    #* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
    #Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
    Now, go ahead and reinstall Firefox:
    #Double-click the downloaded installation file and go through the steps of the installation wizard.
    #Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • HT201210 I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

    I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

    Try using RecBoot or TinyUmbrella to kick it out of Recovery mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    Julian,
    Pages simply won't support a table with that many rows. If you need that many, you must use another application.
    Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
    There are probably other ways, but that's what comes to mind here.
    Jerry

  • IPhoto will not open. Error message says I must upgrade. But APP store says it is already installed?

    iPhoto will not open. Error message says I must upgrade but the AppStore indicates that the newest version of iPhoto is installed so how can I upgrade and why did it stop working in the first place? What is the problem?

    Hi Terence. I solved my problem. Apparently a 9.5.1 version of iPhoto was dowloaded, backed up on Ext Drive then deleted from the Mac HD...Leaving the old version 9.4.3 still resident on the Mac HD.
    Thanks for responding.

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • Error message 'Employee ID Missing'

    You receive error message  'Employee ID Missing' while assigning credit card expenses in an Expense Report and then the user is not able to save the Expense Report.
    This error message "Employee ID missing" unfortunately will appear when you open some of the old expense reports. These expense reports are consistent and do not have to be changed. The upcoming error message "Employee ID missing" can be ignored.
    SAP has corrected this issue and for all new expense reports this error will not appear.
    PS: If you have to change one of these old expense reports from business point of view, you can delete and reenter the cost assignment on expense level in order to get rid of this error message.
    Thank you.
    Best Regards,
    Cryssal

    Hi
    I have checked this but there is still the error message with the users. The org. unit is ok. Is there any note that can be applied so that when move users to another org. unit the error messages do not occur?
    Kind regards

  • Send comments gives the error message "Submission status must be modified"

    Hi,
    When I want to send comments I get the error message "This cell cannot be updatëd. Submission status must be modified to allow changes."
    The work status is still unlocked for this period. It has something to do with authorizations.
    We have users in teams with a data entry profile. These users have the "AddComment" task in their profile.
    They are not able to send comments.
    When I add these users to a team (being the owner of the parent entity) than they can send comments.
    The problem is that in this way they can approve, luck and unlock periods which is not allowed.
    How can I solve this problem?
    Please help!
    With kind regards,
    Robert Nijsink

    Hi there,
    I changed the work state for comments as follows:
    - Unlocked / <all>
    - Submitted / <all>
    I still get the same error message: "Submission status must be modified to allow changes"
    The combination of a team being "Owner" of the parent with "data entry rights" is working properly.
    What do I miss?
    Regards,
    Robert

Maybe you are looking for

  • New MBP and SSD problems?

    Ok, so I installed an Intel SSD in my new MBP( I am eventually getting the MCE OptiBay to put my regular HDD back in. Here's the thing...Every time I run Boot Camp Assistant, and click to install Windows...it restarts...grey screen, then...flashing f

  • Cannot Install itunes 9.1.1.12 on Windows 7 64-bit

    I keep getting the same error whenever I try to install iTunes: +This iTunes installer is intended for a 32-bit version of Windows. Please download and install the 64-bit iTunes install instead.+ According to this link: http://support.apple.com/kb/DL

  • Videos not showing on ipad 2

    Hello I created mp4 files that I moved successfully to Itunes. Then I plugged in my ipad and moved these videos to the Ipad. They are showing under the Movies category of the Ipad. However, when I go to the Video App on the Ipad, it tells me that the

  • When I send a text with iMessage it now shows up on others devises as coming from my email, how do I change this?

    How can I resolve this issue? Now if my contacts don't have my email in my contact they get a seperate converstion. It's rather annoying.

  • Tagging in InDesign CS5, js

    Hi, I need to assign tags to objects in InDesign through script. I looked in OMV, but I couldn't find tags. I would assume it would be something like this: myFrame.tag = "picture1"; I found autoTag, but it does not let me to assign my tag. Your help