Error message "Enter a cust numb" when using BAPIBUSISM007_CREATEFROMDATA

Hello,
We would like to create Business Partner (SAP-BP module) with the standard SAP BAPI "BAPIBUSISM007_CREATEFROMDATA", but we always got the message:
Type A
ID: R11
Mess: "Enter at least one number for the business partner"
Even if we create have a partner group 0002 to assign external partner number and we enter a number in the field external partner number:
Exemple:
PARTNERGROUP 0002
BUSINESSPARTNEREXTERN 7000173 -> number which does not exist in BUT000.
Does someone have already got this message and knows how to solve this issue ?
Thanks a lot,
Maxime
Edited by: Maxime VALLEE on Dec 22, 2008 4:30 PM

Hi,
In fact this link below is not for Business partner but martgage loan which is not what I am looking for.
I would like to create in mass business partner with the standard BAPI :
BAPIBUSISM007_CREATEFROMDATA
It seems that this BAPI is not able to create business partner, but the BAPI "BAPI_BUPA_FS_CREATE_FROM_DATA2" works... The only issue is that the latter BAPI does not enable us to create Sales view and vendor view on the business partner.
Thanks in advance if you have a clue or a solution...
MV

Similar Messages

Error Message " Enter a Vendor Number "?

Hi,
When we are executing MIGO 411 K transaction we are getting error message 'Enter Vendor Number'. My requirement is populate vendor dynamically based on combination of Material, Plant, Storage location and Batch. I got user exit for this User-exit (EXIT_SAPMM07M_001) when click on check button.
We found a User-exit (EXIT_SAPMM07M_001) triggered when User clicks on 'CHECK' button. But since the vendor field (LIFNR) is a mandatory field in MIGO 411 K transaction, its throwing an error message 'Enter Vendor Number'.
SO we are not able to populate the vendor number dynamically in user exit.
Can any one help on this ..how to proceed further...
Thanks
Edited by: Venkatesh Padarti on Jan 2, 2008 11:21 PM

All mandatory fields are checked before any processing happens.
The simplest way is to enter a dummy vendor number (create a one-time or a dummy vendor for this purpose)
Hope this helps,
Lakshman

Error Message (ORA-01722: invalid number) when add amount into Number field

I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
my vb.net code is as follows
Dim oradb As String = DatabaseConnectionString
Dim AmountValue As Decimal = 123.45
'get the connection
Dim conn As New OracleConnection(oradb)
'open the database connection
conn.Open()
'create oracle command
Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
cmd.CommandType = CommandType.Text
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
'Execute
cmd.ExecuteNonQuery()
I got error message "ORA-01722: invalid number". Please help

Did you also change the below line before inserting Integer 123:
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
to
cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input)

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

I get an error message to contact cust support when installing CS4 Design Premium on windows 8

the install begins normally but the following message appeards and will not let me bypass. I have a new windows 8 laptop that i am trying to install on.
Error Message:
Setup Error
Setup has encountered an error and cannot continue. Contact Adobe Customer Support for asssitance.
QUIT

Install logs:
http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html
And naturally, since CS4 comes from a time when nobody could conceive of Win 8 and thus no testing was done on it, try compatibility modes and all that first...
Mylenium

Error message: incompatible image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

A couple things might be causing this problem-
1) The convolution matrix is bigger than 7x7, or
2) You have created an image, but there is not yet anything in the buffer
You can check number 2 by doing a winDraw window just before you do the convolution.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Error message "Pro.sparsebundle" is already in use when trying to back up computer

My computer will not back up to Time Capsule and gives me the Error Message pro.sparsebundle is already in use - how do I reset so I can back up

Reboot the TC.
Since there is no on/off button.. power off the TC at the wall or remove the power cable.. count to 10 slowly.. plug the power back in again.. voila. reset.

Error Message - ORA-01722 Invalid Number

Hello:
I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
The code for the LOV is:
SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
FROM SUPPORTING_DOCS S,
     ORG_DOC_CURR_VER O,
     AGREEMENTS H
WHERE
    S.DOC_TYPE = 'HISA'
AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
AND H.ORG_KEY_LE = O.ORG_KEY
AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
Ok, now here is where my problem starts.
When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
BEGIN
IF :P6_SEARCH_ORG != '0' THEN
:P6_ORG_KEY_LE := :P6_SEARCH_ORG;
END IF;
END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
select ORG_KEY_LE display_value, ORG_KEY_LE return_value
from AGREEMENTS
order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
I then have a Search button in the Button area which has the following settings:
Button Position: Region Template Position #CHANGE#.
Condition Type: Value of Item in Express 1 is NULL.
Expression 1: :P6_ORG_KEY_LE.
To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
The SEARCH functionality in both pages are identical.
When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
The PL/SQL block for the Submit process is the following:
BEGIN
update
    MDD.HISA_AGREEMENTS
     set
       LAST_UPDATED_BY=V('APP_USER'),
       APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
       APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
       APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
       APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
       APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
       APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
       SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
       APPROVER_TITLE=:P6_APPROVER_TITLE
where
      ORG_KEY_LE=:P6_ORG_KEY_LE
INSERT INTO
    HISA_AGREEMENT_DOCS
      (HISA_AGREEMENT_DOC_KEY,
       ORG_KEY_LE,
       APPLICATION_KEY,
       STATUS,
       STATUS_DATE,
       CREATED_BY,
       ORG_DOC_CURR_KEY)
VALUES
      (HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
       :P6_ORG_KEY_LE,
       :P6_APPLICATION_KEY,
       'C',
       SYSDATE,
       V('APP_USER'),
       :P6_DOCUMENT)
END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
Thanks for the help.

Hi,
I believe you are on to something.
The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
This is the path in which my user would like to accomplish her task:
1. Select an organization
2. Display the information for that organization from the AGREEMENTS table
3. Enter the data for the remaining fields in the AGREEMENTS table
4. Select the document (:P6_DOCUMENT) from the drop-down.
5. Click Submit
6. Update the AGREEMENTS table with data entered in #3.
7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
How do I fix this?

Error Message (Enter spread / MAD type B ...) while saving sale order

hello,
when i try to create sale order (VA01) , and when i enter the custmer number (befor entring other informations ..) I get this Error Message :
"Enter spread / MAD type B for 05.08.2008 in the system settings"
the message number is : SG117
plz help me to solve this problem.
cordialy
SDA

Hi
The exchange rate buying & selling rate has not been secified for the conversion of amount to another curency
you need to maintain this
please work with your FI consultant on this as exchnage rate spread needs to eb maintained - verify the currency maintained for the cuustomer in the master for this
the settings will be done in the IMG under currencies - type B = Actual period end rate
cheers
Nandu

Error Message: "The parameter is incorrect" when trying to modify SSLs

Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.

Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Error message:enter rate GBP/MYR rate type M for 01.05.2008

When we try to post the GL account document using t-code F-02 the
system does not allow us to post by pop up an error message Enter rate
GBP?MYR rate type M for 01.05.2008 in the system setting.

You must have update the OB08 table for GBP to MYR for 'M'
But not maintained for MYR to GBP. for 'm'
If your local currency is MYR and GBP is a direct quote always maintain:-
M - 1 GBP agansi direct say 40 MYR
M - 0.02 MYR indirect against 1 GBP
Regards,
Alok

How to End the Error message: "enter the password for the exchange account"

i completed configure Exchange Account on my iPhone, but still show the error message: "enter the password for the exchange account"

make sure you don't have 2 step verification in gmail.
otherwise you need to follow
Signing in using application-specific passwords
The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
Some devices and applications that use these special passwords include:
POP and IMAP email clients such as Outlook, Mail and Thunderbird
Gmail and Google Calendar on smartphones
ActiveSync for Windows Mobile and iPhone
YouTube Mobile on Apple devices
Cloud Print
Installed chat clients such as Google Talk and Adium
3D Warehouse, Sketchup, and installed applications
AdWords Editor
Sync for Google Chrome
Gmail Notifier
How to generate an application-specific password
Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password:
Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
Using application-specific passwords
When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
Enter your username.
Enter your application-specific password in the password field.
If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

Error message "Enter a cust numb" when using BAPIBUSISM007_CREATEFROMDATA

Similar Messages

Maybe you are looking for