Error message Entry already exists in UDO

I am working with SAP B1 Release 2005B. The software was working fine for more than 11 months. Now suddenly from last 2 days no entry is getting saved into an UDO. the error message displayed is
' This Entry already exists in the table '(@CREQ) (odbc-2035)
I found the same problem addressed in the forum many times but no solution
Kindly help . The data entry into the system is not taking place
Bye

Hi,
for me this sounds like the Numbering File got damaged.
Administration -> Utilities -> Restore -> Restore Numbering File
lg David

Similar Messages

Error: This entry already exists in the following tables "(ALR2)(ODBC -2035

Dear Expert,
I can not prepare Sales Order and Purchase Order in SAP B1-2007 SP 1(Both Documents Having on Approval ), due to following system error.
System Error:
This entry already exists in the following tables "(ALR2)(ODBC -2035) [Message 131-183]
Kindly check it and provided me solution.

Hi,
Check This
This Entry already in following tables "AIT1) (ODBC-2035) [message 131-183]
Regards
Deepak Tyagi

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

Item or object?
For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Inventory Revaluation Error : This entry already exists in the foll.table

Dear community members,
For Inventory Revaluation, we have used Primary Series for fiscal
year2008-2009( April2008 -March2009) and total number of documents
posted last fiscal yr are 43(Primary 1 to Primary 43)
Starting Fiscal year 2009-2010(April2009-March2010), we havedefined
series 09-10 (First Number 1) and assigned it to current fiscal year
(Period Indicator 09-10), but when we are trying to post first
Inventory Revaluation documnet for fiscal year 09-10 (Series 09-
10,documnet number 1) , system gives an error "This entry already
exists in following table(OMRV)
Please provide the solution ASAP
Regards,
Mukesh Agrawal

Hi,
You can check the similar settings in the Demo database and if the issue is not reproduced, it can be a database corruption.
Probably, you need to log a support Ticket to SAP in order to get your issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

I uninstalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "Object already exist". Can anyone help?

I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?

jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR

I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?

I unstalled Photoshop Elements 12 from my computer andnow when I'm trying to re-install I'm getting an error message "objext already exist". Any suggestions on how to correct this?

jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR

Can't reinstall itunes on windows 7 comp. Get error message "object already exists"

Difficulty reinstalling itunes on Windows7 machine. Despite uninstalling everything apple, I constantly get error message: "object already exists" and the install fails. I have gone through hard drive but can't find anything itunes or apple. Uninstalled everything apple in control panel. What am I missing?

Try opening Control Panel > Programs and Features > View installed updates then checking for the Security Update for Microsoft Windows (KB2918614). , Uninstall if you have it, then reboot.
There is a strong hint here that it should resolve this issue, although personally I have that update installed and have been able to remove and reinstall iTunes without any problem.
Click for more on KB2918614 which is an update to the Windows Installer Service released July 12th 2014. The timing and nature of the update suggest a connection with the "Object already exists" issue which affects other installations as well as iTunes.
tt2

Messages fail in PI with error "Message ID already exists in database"

Hi Guru's,
The scenario is from FILE->PI->MDM .
Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
Please help me out .
Attached the full trace in PI :
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

Hi Gowtham,
Can you check once whether message gets failed after it is automatically restarted.
Check traces for each defined pipeline.
I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
Also check with basis team on tablespace issue.
Regards
Jitender

Error: This entry already exists in the Financial Report Table OFRT..

Hi ,
The above error appears only when we try to create any kind of templates in the database.
Last time this error appeared when trying to create Profit and Loss Statement using Financial Report Templates.
As a result i had to use copy express to copy over the template from one database to another.
This solved the issue.
But now on trying to create a cost center hierarchy, (template to design profit center) we face the same error as mentioned in the subject line.
What could be the reason?
I tried to create a new financial report template as well, it prompts for the same error.
Kindly revert with your comments.
Regards.

Hi Gordon,
Thanks for your reply!
Can you let me know how to log an issue with SAP helpdesk.
Currently our consultants are logging issues on our behalf.
But this process takes long...
Please comment.
Regards,

SG300, FW 1.2.7.76, "Entry already exists" when changing ACL's

Hello,
I am getting very frustrated trying to modify/create ACL's on my SG300-20 switch.
I have the switch in L3 mode. I have created several VLAN's and ACL's for each VLAN controlling their access to each other. After the initial setup, I have started trying to create more VLAN ACL rules to allow more access between the VLAN's. The problem I keep running in to is that when I go to modify the ACE's in the ACL, I keep getting the error message "Entry already exists". For example, I go to modify the port ranges to tighten them up, and try to save the ACE after modifying it, and I get that error message.
I have gotten frustrated and deleted ACE's, and then tried recreating them, and I get the same error message! I noticed that if I wait long enough (many minutes, hours?) I can go in and create the ACE again. The ACE definitely doesn't exist but the web interface won't let me create it. I've even tried using a completely different Priority value which isn't used in any of the ACL's, that didn't work either.
Why is this happening? At this point I am finding it next to impossible to configure this thing. Frustrating...

Here is a screenshot of one of my ACL's. This ACL is being applied to every port which is in the VLAN with the IP range 10.0.0.0/24
http://imgur.com/C6iQk
I just tried to add a new rule which failed with the same error:
Priority 89
Action: Permit
Source IP Address: 10.0.0.21
Source IP Mask: 0.0.0.0
Destination IP Address: 10.1.0.0
Destination IP Mask: 0.0.0.255
Source Port Range: 8080
Destination Port Range: 49152-65535
So I am trying to allow anything from the 10.1.0.0/24 network to talk to port 8080 on 10.0.0.21. This failed with the "Entry already exists" error.

Error when updating Budget-This entry already exists...Budget (OBGT)

SAP 2007A SP00 PL49
When updating Budget, get following error:
This entry already exists in the following tables 'Budget' (OBGT) (ODBC-2035) [Message 131-183]
Any ideas?
Thanks,
Ajay Audich

Hi,
Vitor Vieira,
Thank you that your answer helped me solving my problem to some extent.
I solved the problem by creating document and document lines table and creating a UDO with it. Because the problem was with assigning some data to the u201CCodeu201D field when using master type tables.
I didnu2019t get any problem after using the document and document lines table.
Also,initially I didnu2019t bind the # column of my matrix with the LineID field of table. After doing that it is working fine and I am able to update the records.
But still this is not a proper solution and I didnu2019t get answer for why master type UDO doesnu2019t support updating.
Thanks,
V.M.Nivasini

A/R invoice update error-Entry already exist in ado4

Hi all,
Currently I am using version PL39 when i am trying to update my A/R invoice its giving following error -This entry already exist in following table ado4[message 131-183].
As per my knowledge ado4 is history table for A/R invoices.
Kindly help me.. why this error is coming and how to resolve this error.
Thanks in advance,
Regards,
Jitendra Sali

Jitendra Sali,
I would suggest you escalate this to SAP Support as you wait for an answer from this Forum.
Suda

This Entry Already exists in table (Message: 131-183)

Hia All,
I have a very serious problem that's I have been unable to solve on my own.
I have a User defined form that is linked to a User defined Object. The Object consists of a Master data and a Master Data Lines table.
I am able to add a record without any problem, but I attempt to update an existing record I get the following error: "This entry already exists in the following tables..."
Strangely, this only happens when I add iditional records to the Lines table, and not when existing data is altered.
Please help me.

Hi Ben, yes I was able to solve the problem.
It seems that when you add additional rows to your lines table, you have to manually add the records to the DBDatasource on the before action. i.e. Catch the Item Pressed before action on item 1 (OK button), and manually insert the additional lines into the DBDatasource as displayed below.
e.g.
i = oForm.DataSources.DBDataSources.Item(1).Size
oForm.DataSources.DBDataSources.Item(1).InsertRecord(i)
oForm.DataSources.DBDataSources.Item(1).Offset = oForm.DataSources.DBDataSources.Item(1).Size - 1
oForm.DataSources.DBDataSources.Item(1).SetValue("U_ItemCode", i, Code)
This code will typically reside insode a loop seeing as you will loop through your matrix/grid rows and add the additional lines.
This sorted out the problem for me, I hope it hepls you.

This entry already exists in the following tables 'Journal Entry' (OJDT)

Forum,
I'm 8.81 PL09. Yesterday we performed a stock count then updated quantities and then reconciled the stock posting. This correctly posted a journal to the relevant stock gain/loss account.
Today we found that there had been a couple of mistakes in terms of the counted quantity so we again went into Stock Taking, amended the quantities then went into stock posting. We confirm the quantities need updating but upon trying to 'Reconcile' we get the following error:
This entry already exists in the following tables 'Journal Entry' (OJDT) (ODBC-2035) [Message 131-183]
I have tried to perform a restore item balances to no avail.
Could anyone shed any light on this?
Regards,
Juan

Hi,
I'm facing the same problem. It seems like the number series got stuck. I also reconsiled the first load, and then for the next one I'm facing the same problem as you have. I can see the first journal entry having the correct docnum according to the number series setup. But in the number series setup, the "Next no." still have the same number as the first journal entry. I have no idea how to fix it, but to make it work for now I guess you could go and change the default number series for Journal Entries and finish rout inventory posting.
Let me know if there is any fix on this one.
Kjetil Sandvik

This entry already exists in the following tables OCRD

I'm trying to create a Business Partner Master Data in SBO2007 SP 01 PL 05 and I got the following error:
This entry already exists in the following tables 'User-Defined Object' OUDO) -(ODBC - 2035) also this error:
This entry already exists in the following tables 'Business Partner' (OCRD) -(ODBC - 2035)
Any idea what should I do ?
I try the restore function, run a RSP task, comment the code in the Transaction Notification and the problem continue and I need to create new Busines Partner Master Data in the database.
Any comment will be useful.
Thanks.
Regards,
Gabriela.

Hi,
If you are trying to create a Business Partner code where the code is same as another added in the database already as a G\L Account, then the error also occurs.
If the issue is not fixed by running the task, it is a database corruption for which further investigation from support is necessary.
Please log a support ticket to get the issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

Error message Entry already exists in UDO

Similar Messages

Maybe you are looking for