Error message 'entry pernr inexistent dans pa0003' while creating new pernr

Hi experts,
I created a screen for creating new HR employee (pernr). Whatever FM I used to create the new pernr from the screen there is always the error message: 'entry 1234(pernr to create) doesn't exist in pa0003' when I save it. That's why???
Thanks!

When you say you are creating new pernr, are you doing a new hire? You will do this through transaction PA40 that will create a pernr when you do new hire! I will ask the same thing..what FM are you using?
Mithun

Similar Messages

Error Message ME 083, "Please enter plant" while creating PR or PO

Hi,
I have one problem in my SAP system. Eventhough i maintained everything in IMG customization relevent settings to create PR or PO and Org str well defined with comany, plant etc, assignments of org str well done, while creating PR or PO, system throughs error message "Please enter plant". Eventhough i manually enter the plant number in PR or PO, again i get the same error. The error message number is ME 083. Please guide me how to overcome this error?
Thank you.

Hi
Did you create the plant form scratch or did you copy it from an existing one.
If it is the last, check the assignments again.
See [626252|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=626252] or [580164|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=580164]
regards
Sidi

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Hi, trying to watch Sky TV on laptop - installed Silverlight but error message says unable to watch Sky while in a private browser. Can I come out of this thru Firefox?

Hi, trying to watch Sky TV on laptop - installed Silverlight but error message says unable to watch Sky while in a private browser. Can I come out of this thru Firefox?

There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
*http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/
*https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
*[http://www.flatplanet.tv/שידור-חי/ערוץ-1]

Error Message -Entry Point Not Found -Can you help me?

When I open up my Photoshop 6 Elements I get this error message:
" Entry Point Not Found- the procedure entry point-CFBundle Copy File Type For File Data could not be located in the dynamic link library core Foundation.dll "
I can click the OK option 3 times and the message disappears and I am able to work in Photoshop.
Can anyone tell me what this erro message might mean?
Thanks!

I am receiving the exact same message when I open Photoshop Elements 6.0. ADOBE: PLEASE respond to our requests and post the fix for this.
Also, to whoever runs this forum, please do not indicate that this question has been answered in any way.
thank you.
frustrated

MSA Activity: error while creating new activity

Hello forum,
I've problems while creating new actvitities for bp.
I get error: sales divison/organ. is not filled for the logged on user
The activity is saved, but I can see shortly this error message.
We have customized in crm-online, that the findung is activated.
Can we deactivate this for mobile client ?
Thanks,
Gerd

Hi Patrick,
thanks for very fast answer.
So I think I have the problem found, but I cannot set the default flag to another
org.unit, because of missing entries.
I've already downloaded the org.modell by crm-report to client, but without success.
Do you now if I have to assign the employee (loggon-msa-user) in crm-org-modell to the org-unit or isn't it necessary for this download ?
br
Gerd

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating new release groups in PO release strategy

Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan

Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic     Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class     After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order     In this step four processes involved.o     Release Groupso     Release Codeso     Release indicatoro     Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group     In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code     In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator     In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy     *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

SBO0001 error DBD:ORA12154 error while creating new connection

Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
Mike

Mike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark

Error while creating new client

Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babu

Hi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik

RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rock

hi,
check the log file and let me the the error.
manish

PDF Error while creating New PCR

Hi All,
i am getting belolw error while creating new PCR, it suppose to open PDF but with out opening it is giveing following error.
The initial exception that caused the request to fail, was:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://localhost:50000/AdobeDocumentServices/Config?style=document"
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
Request you guide me to resolve this problem
Thanks,
Srinivasu.Y

Hello Srinivasu,
It seems your Adobe configuration is not correct. Please use SAP note 944221 for troubleshooting.
Also go through online help documentation-
http://help.sap.com/erp2005_ehp_04/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm
Configuration: Business Package for Manager Self-Service->Configuring Adobe Document Services
Regards
Pooja

Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?
This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
There is also a link on posting all necessary info, to help others help you.
Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
Good luck,
Hunt

Error message 'entry pernr inexistent dans pa0003' while creating new pernr

Similar Messages

Maybe you are looking for