Error Message ( Error converting a selection internally  )

Hello Experts ,
I have a question ...all the time i try to open a selection at planning book  the following message appears
Error converting a selection internally
Message no. /SAPAPO/MCPSH_SEL029
Some one can help me with this issue PLEASE ....
Thanks
Mauricio

Hi,
I have used the function module /SAPAPO/MCPSH_SELECTION_SAVE to create selection ids. Now for selection id which has a navigational attribute as a selection criteria, i am getting the below error when I select it in the planning book.
Error converting a selection internally
Message no. /SAPAPO/MCPSH_SEL029
When I do Display Selection on the selection id, I find the following
APO Planning Version    000 
Depot    ABC 
PROD_ACTIVE    X 
This is strange as the 1st two infoobjects APO Planning Version and Depot are characteristics and are displayed by their description while the 3rd infoobject PROD_ACTIVE is a navigational attribute and that is displayed by its name.
When I goto Object selection, I find that the selection criteria has only APO Planning Version  =  000  and Depot =  ABC. The navigational attribute PROD_ACTIVE = X is missing.
Can anybody throw some insights into this issue?
Thanks in advance
Ehsan Ahmed

Similar Messages

  • Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

    Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
    type: Exception report
    message:
    description: The server encountered an internal error that prevented it from fulfilling this request.
    exception:
    ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
    root cause:
    NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
    note: The full stack trace of the root cause is available in the logs.
    Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

    Hi Mesut,
    you can refer the link for migration
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
    regds,
    aman

  • Error message when converting PDF to Word?

    I continue to get conversion error messages when converting a PDF to Word.

    HI tatamene,
    I'm sorry that you're having trouble converting a document.  For starters, have you verified that your account is active? (You can check by logging in to www.adobe.com and checking under My Subscriptions and Services). Aside from that, I'll need a little more info to get to the bottom of your problem.
    Are you trying to convert the file from within Reader, or directly via the ExportPDF website?
    What operating system and browser are you using?
    How large is the file that you're trying to convert? (There's a file-size limit of 100 MB.)
    Is the computer that you're using networked?
    Do other files convert without error?
    I look forward to hearing back from you.
    Best,
    Sara

  • I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

    I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

    Hey amba1015,
    I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/TS1387
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • Error message when attempting to generate Internal Requisition

    Hi,
    Today, internal requisitions are generated without problems between organizations of the same operating unit but is the first time try to create internal requisitions between organizations of different operating units but send error message
    Error Message: "Destination location requires customer association in Source Organization"
    Operating Unit and Organization requesting and receive:
    Operating Unit “A”
    Inventory Organization of operating unit “A”
    Operating Unit and Organization where they generate the internal orders:
    Operating Unit “B”
    Inventory Organization of operating unit “B"
    The Shipping Network is configured
    What additional configuration needed?
    Thanks and Regards
    Manuel

    Please see these docs.
    POXRQERQ - Creating Internal Requisition - Destination Location Requires Customer Association, ARXCUDCI Customer Address Returns FRM-40735, ORA-01403 [ID 179792.1]
    What Are The Steps Required To Setup An Internal Requisition In Purchasing? [ID 406312.1]
    FAQ - Purchase Order Organization Setup [ID 1263565.1]
    Create Internal Requisition For a Process Item Causes APP-PO-14142 error [ID 461518.1]
    APP-PO-14142:PO_REQ_LNS_C1.getsource-170: When Creating Internal Requisition [ID 748974.1]
    Thanks,
    Hussein

  • Downloaded firefox 5.0.1 last night, worked fine, Turned computer on today, Mozilla Firefox, it won't start. Get error message, Error: Platform version '5.0' is not compatible with minVersion =5.0.1 maxVersion =5.0.1" What do I need to do to fix it?

    We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?

    The updater wasn't able to update all the files and some were left as older versions.<br />
    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • Error message "Error when scheduling the query(JOB_CLOSE)".

    Hi all,
    While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
    Could you please find what this error is?
    Thanks,
    Uday.

    Hi Uday,
    This problem can occur if you changed the query definition.
    In this case the query definition would be inconsistent with the existing extract structure.
    Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
    to delete.
    After this you could use the same table name for any further extract that you need to create.
    One caution is that the extract table should not be deleted through any other transaction before you run the report.
    Rgds,
    Colum

  • Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT1349 itunes will not open on my computer, and says I need to reinstall it.  When I try to reinstall itunes I get an error message error #2502 and error #2503

    When I try to open itunes I get a message that says that itunes is corupt and I needto reinstall it.  When I try to reinstall itunes Iget two error messages; error #2502 and error #2503.  How can I get itunes to work?

    Many thanks.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

    I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

    Restart. If an application won't quit and prevents restarting, select
     ▹ Force Quit...
    from the menu bar, then select the frozen application from the list and press return. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up. Test.

  • I cannot complete an installation of ITunes.  During the install, I receive the following error message:   Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    I cannot complete an installation of ITunes.  During the install, I receive the following error message:
    Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT1926 Itunes install error message error 2203

    Why when trying to install, I get the error message error 2203 What can I do

    I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
    [code]
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.exe]
    @="exefile"
    "Content Type"="application/x-msdownload"
    [HKEY_CLASSES_ROOT\.exe\PersistentHandler]
    @="{098f2470-bae0-11cd-b579-08002b30bfeb}"
    [/code]
    Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

  • I have installed photoshop 13 version 32 bits. i have changed my computer and must reinstall version 64 bits. When i try to dawload i have an error message  error 7 and 6. How can I succed reinstalling photoshop?

    i have installed photoshop 13 version 32 bits. i have changed my computer and must reinstall version 64 bits. When i try to dawload i have an error message  error 7 and 6. How can I succed reinstalling photoshop?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

    Hi Guys,
    I am currently facing some issues with respect to the deliver creation.
    The scenario is somthing like this.
    I have assigned a FOC Item category to an Consignment Issue order type.
    The system is able to determine the Item category successfully.
    However when the delivery is created it throws an error message
    'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
    Not sure why this occurs.
    All the settings seem to be set.
    If any one of you can help me out it would be great.
    Thanks.
    Regards,
    Pandi

    Dear Pandiraj
    The standard process is that consignment issue order should be created with reference to Proforma invoice.  Having said that I dont understand why you have assigned a FOC item category to issue order.  Not sure, whether this will work.  Also I feel that you should explain in detail the process for which you are configuring this.
    thanks
    G. Lakshmipathi

  • I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

    I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

Maybe you are looking for