Error Message:error message 25003001 not assigned to cc 3000

Hello All,
I am getting the above error message while posting in FB60. I used the cost center is 25003001 in company code 3000. Actually the cost center belongs to cocd 2500. Please let me know the reason. many thanks, Bob

Hi
You have answered your question already.
Change the assignment for cost center 25003001 in KS02 to company code 3000.

Similar Messages

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

Error " material is not assigned to company code" How do I

Hi
Guys I am getting the error
" material is not assigned to company code" How do I solve it?
Thanks
samuel

hi samuel,
this error is due to the fact that you must have assigned the plant to this material and that plant is not assigned to your company code. or the other case may be the organisational levels whic you have maintained in which you enter your sales org. check if that sales org is assigned to your company code.
in short chec all the assignments related to your enterprise structure.
Regards,
Archit

Message: Vendor not assigned to Plant

Hi All,
I am creating a standard PO for raw material. While creating I am getting a message : Vendor not assigned to Plant.
This message should not come as my PO is not a inter-company PO.
Can someone help me.
Thanks,
Vengal Rao.

Hi
Sandra is right (and Paulo). This message is once hardcoded in all system (function module AIP01_PLANT_DETERMINE):
 call function 'AIP01_T001W_EXT_READ'
 exporting
 i_lifnr = i_lifnr
 importing
 es_t001w_ext = es_t001w_ext
 exceptions
 plant_not_found = 1
 others = 2.
 if sy-subrc <> 0.
 message e002 with i_lifnr raising vendor_not_found.
 endif.
Regards
Eduardo
Edited by: E_Hinojosa on Oct 27, 2011 4:54 PM
Edited by: E_Hinojosa on Oct 27, 2011 4:55 PM

Error - Company code not assigned to country or country to calculation proc

Hi All,
We are on ECC 6.0 instance.
While trying to post a JE, I am getting the error message "Company code not assigned to country or country to calculation procedure". I am able to post the JE for a another company code. It seems we are missing some configuration for the company code error is coming up.
Any ideas what is causing the errors. More details about the error are below:
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.

Hi,
You need to assign the tax procedure to company code.
Try transaction OBBG. and check whether the proper tax setting are maintained or not
You probably need to make other tax settings so you should check out
the menu Financial accounting>Financial Accounting Global Settings>Taxes on
Sales/Purchases in the IMG.
Hope it will work.
With Best Regards,
Navneet Chaubey

Error: "Account Symbol NOT Assigned to Flow Type".

Good Morning,
When I runs transaction RERAPP, I got this error message: Account Symbol NOT Assigned to Flow Type.
However I reviewed the configuration specifically "Assigned Account Symbol to Flow type", and the account symbol is there.
I mean is already assigned to the flow type.
Do I have to review in any other place? What else I need to do?
Regards,
Hector

Hi Hector,
Please make sure that for any Reference Flow Type that you assigned for all the Flow Type Relations (check if you have all the needed relation that you need) (V_TIVCDFLOWREL) you have a correspondent (V_TIVRAACCDET - Account Determination Value).
Regards,
DAS

ERROR: "You are not assigned to a role" in BEx

Hi,
I have a user BEXUSER. In PFCG, I have assigned this user to a role ZR_USER_ROLE.
However, when I tried to open a query in BEx Anlyzer through Open > Workbooks > Roles toolbar, I could not find any workbooks assigned to this user.
Next, I tried to open a query using Open > Queries toolbar, I chose a query and tried to click Enter in Role icon. However, I am prompted with a message saying "You are not assigned to a role".
How is this possible when I have already assigned this user to a role. I have checked PFCG and confirmed that the particular role contains this user. Can someone explain about this?
Thanks

I am getting this exact same error, and the values that I have set in my query developer's job role are the following :
S_USER_AGR
ACTIVITY = 01, 02, 06, 22
ROLE NAME = {list of roles that the user should be able to save queries to}
S_USER_TCD
TRANSACTION CODE = RRMX
The user still receives the "you are not assigned to a role" error message when pressing the "save to role" button for a workbook.
In the ST01 authorizations trace, I see that the user is FAILING the authorization check for S_USER_AGR, but is failing the check for role names that he / she not supposed to modify.
So those failures are good, but they seem to prevent from saving the workbook to any role ...
How can it be setup so that the user can save workbooks to roles that were inteded to be saved to, without getting the "your are not assigned to a role" error when trying ?

Add new loop field in custom infotype - error field .. not assigned to loop

Hi,
I have a task of adding a new loop field in a custom infotype screen 3000. Here, in the past there have only been the fields begin date and end date. I need to add a new field, so this is how I proceeeded:
1) I modified the screen 3000 in SE38, adding the field where I wanted and defining a loop.
Now, I get the syntax error : Field P9500-field is not assigned to a LOOP. LOOP...ENDLOOP must appear in PBO and PAI.
There must be something wrong in what I'm doing, can you please let me know a quick fix on this or how I can accomplish this in PM01? Please keep in mind that this is a custom infotype for SAP TEM, I can't see it in PA.
Best regards,
George

Not a nice solution but I had to do this quick and I'll correct it in the next days:
The old flow logic PBO code was:
LOOP.
    MODULE FILL_DYNPRO.
ENDLOOP.
If I wanted to insert here something like:
FIELD whatever
    MODULE dummy.
, I'd get stupid error messages like this other field is not in loop, endloop, then if I put that other field I'd get the error that the fields are in the same loop...
Wanting just to get this over with, I added the following code (after the initial loop):
LOOP.
    FIELD whatever
      MODULE FILL_DYNPRO."same module as above
ENDLOOP.
This was repeated in PAI.
This pretty much works out fine for the moment, I'll look for finer solutions in the week to come.
Thanks for the help, guys.
Best regards,
George

Error--Control indicators not assigned to company code

While creating PO in IDEAS following error is coming.
"Control indicators not assigned to company code"
Pl . suggest the remedy,
Thanks a ton,
Regards,
NB

Goto T code OKKP select your co.code on left side click on Activate components.
in first tab " activate components" activate cost center , order mgmt, comm mgmt etc and save it.
Reward if useful;
Rgds
GIrish Kavital

Error : you are not assigned to a position

Hi Seniors,
I am getting below error though I have assigned proper position in R/3 and also I have linked this with communication info type 105 using PA30. I am not able to see my data in portal.
Please help...
Regards,
Ritu

Hi Ranjith/ Luke,
I re-checked the OM- PA configuration and again try to maintain A012 relationship as well... but again the same error ... " You are not assigned to a position "
Please help
Regards,
Ritu

Getting Error 'Custom Class not Assignable'

Hello,
I am new to ADF and Linux. I have created an ADF application (following the steps in: http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_2.html) with the corresponding View objects, Entity Objects and Application Module. When I try to run the 'Application Module', I get the following error. So I am kind of stuck at this point from going forward.
I appreciate any help/pointers to resolve this issue.
Thanks!
oracle.jbo.CustomClassNotFoundException: JBO-26023: Custom class oracle.apps.model.applicationModule.AppModuleAMImpl is not assignable to oracle.jbo.server.ApplicationModuleImpl
 at oracle.jbo.common.JBOClass.findCustomClass(JBOClass.java:224)
 at oracle.jbo.server.RemotableCompDef.loadFromXML(RemotableCompDef.java:147)
 at oracle.jbo.server.ApplicationModuleDefImpl.loadFromXML(ApplicationModuleDefImpl.java:1128)
 at oracle.jbo.server.ApplicationModuleDefImpl.loadFromXML(ApplicationModuleDefImpl.java:1068)
 at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:562)
 at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1192)
 at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:617)
 at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:537)
 at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:519)
 at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:784)
 at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:282)
 at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:471)
 at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:87)
 at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)
 at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)
 at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2913)
 at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
 at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2473)
 at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2347)
 at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3246)
 at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)
 at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)
 at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)
 at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)
 at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)
 at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:214)
 at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:906)
 at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:632)
 at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:597)
 at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:428)
[968] JUErrorHandlerDlg.reportException(oracle.jbo.jbotester.ErrorHandler$ExceptionWrapper)
[969] UIMessageBundle (language base) being initialized Sep 14, 2012 12:15:33 PM oracle.jbo.jbotester.MainFrame exit
INFO: BC4J Tester exit code(-3)

Thanks Vinod for your response! I checked both the files as you mentioned: So my Model.jpx looks like this:
For this, I tried entering "oracle.apps.model.applicationModule.AppModuleAMImpl" for the value attribute, but that did not seem to work.
<DesignTime>
<Attr Name="_jprName" Value="../../../../Model.jpr"/>
<Attr Name="_jbo.TypeMapEntries"
Value="oracle.apps.fnd.applcore.oaext.typemap.OATypeMapEntries"/>
<Attr Name="_NamedConnection" Value="RoomConnection"/>
<Attr Name="_appModuleNames0"
Value="oracle.apps.model.applicationModule.AppModuleAM"/>
</DesignTime>
<Containee
Name="applicationModule"
PackageName="oracle.apps.model.applicationModule"
ObjectType="JboPackage">
<DesignTime>
<Attr Name="_AM" Value="true"/>
</DesignTime>
and my AM.xml looks like this:
Name="AppModuleAM"
Version="11.1.1.63.37"
InheritPersonalization="true"
ComponentClass="oracle.apps.model.applicationModule.AppModuleAMImpl"
ClearCacheOnRollback="true"
DefClass="oracle.apps.model.applicationModule.AppModuleAMDefImpl">
Thanks for all your help!

Error message "Solution not assigned to this user"

After creating the data source, I'm trying to create a report in SDK sandbox solution.
As I'm not a keyuser, it is going to the ByD center and asking for user id / password.
I even tried to assign WoC View also to a user.
When I tried with different user ids given to me by SAP, I'm getting the same error.
Let me know the steps to assign a solution in ByD center for report creation from ByD SDK
- Ravi ,

Hi Ravi,
as I already told Lynn, this will only be possible in a global solution.
The reason is the following:
You can create yourself multiple sandbox solution. So if you now to multiple changes with key user tools in the frontend for different sandbox solutions, in the end you won't know which change was made for which sandbox solution as these changes won't appear in your list of solution entitities in the ByDesign studio.
Therefore: Changes with the key user tools can only be made for the global solution.

Error: Field symbol not assigned

Hi all,
When I run a query (BW version 3.5) with a condition or an exception I receive an error message "Field symbol has not yet been assigned". The same query run fine on BW version 3.1.
SP 11 and SP12 are installed.
Any idea how to solve the problem??

Paolo,
Note 555143 can not be implemented. Probably because I am working in BW version 3.5 instead of BW version 3.1.
Thanks anyway.
Regards,
Hans

Runtime error "field symbol not assigned"

hi friends i have designed a report in alv form. and there is one runtime error afer user selectin screen.
"field symbol has not been yet assigned"
what could be the problem

Please check the field catalog you have created
ls_fieldcatalog-tabname = 'GT_FINAL'.
ls_fieldcatalog-fieldname ='PSPNR'.
* ls_fieldcatalog-coltext = text-001.
ls_fieldcatalog-col_pos = 1.
* ls_fieldcatalog-do_sum = 'X'.
* ls_fieldcatalog-outputlen = 20.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
CLEAR ls_fieldcatalog.
or if you are using filed symbols than
ASSIGN COMPONENT 'GTFINAL' OF STRUCTURE gt_final
thanks

Abap runtime error" field symbol not assigned"

hi ,
getting error while calling function module reuse_alv_popup_to_select
please let me know how to resolve it

Hi,
Befor calling the FM
Check with If condtion as below.
IF <Fiels-symbol name> IS ASSIGNED
ENDIF.
Regards,
Pravin

Error Message:error message 25003001 not assigned to cc 3000

Similar Messages

Maybe you are looking for