Error message "exception exception in module dd.exe at 00074fc9. dm.c

Hello,
I am getting the above message (shown in the subject line) each time the computer first starts up. Is there a way to fix this so it doesn't pop up each time.
Regards,
Liyakat

This file seems to be part of the FujiFilm software (Fuji MyFinePix Studio camera device detection.) If in doubt the software can always be removed to see if the problem stops once the program is removed and reinstalled if necessary.
See http://www.file.net/process/dd.exe.html

Similar Messages

Exception EOlesysERROR in module Skype.exe @ 00129...

Skype ran with no problems prior to the latest update. Computer is Dell Latitude laptop running Win 7 Ultimate SP 1 64-bit.
First Install
1. Logged in to local admin account.
2. Disabled malwarebytes realtime protection.
3. Got a fresh download from Skype site for Save and Run.
4. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
5. Visited Skype site and reviewed Skype Community.
6. I tried to get the 6.14.0.14.msi download per the Community, but the link had been disabled.
7. Retried install in Safe mode with No Networking . Got Exception EOlesysERROR in module Skype.exe @ 00129D69.
Second Install
1. Restarted the laptop and logged into local admin account.
2. Uninstalled Skype 6.21 and Skype Click to Call.
3. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
4. Got a fresh download from Skype site for Save and Run.
5. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
6. Changed permissions on Skype icon and Skype.exe to give “everyone” full control.
7. Skype would not run.
Third Install
1. Uninstalled Skype 6.21 and Skype Click to Call.
2. Found an earlier version 6.18 of Skype in the C:\users\localadmin\downloads folder.
3. Ran SkypeSetup.msi for version6.18. After completing some of the install, got Access Denied error.
4. Uninstalled Skype 6.18.
5. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
6. First Search: Deleted all Skype Folders by using the Windows Search utility while logged into local admin
account. It found about 40 items.
7. Second Search: Ran the Windows Search utility again and found 8 items.
8. Ran TweakNow Power Pack 2011 to clean registry of Skype items. Ran it again to clean tracking items for Skype.
9. Retarted the laptop.
10. Third Search: Ran the Windows Search utility again and it was clean.
11. Logged in as the standard user.
12. Fourth Search: Ran the Windows Search utility again and it found 7 Skype items.
13. Ran TweakNow Power Pack 2011 to clean registry of Skype items. It found some Skype items for the standard user.
Ran it again to clean tracking items for Skype.
14. Logged out of standard user and logged in as local admin.
15. Ran dxdiag.exe per reference in the Community. No problems were found in either in 32- and 64-bit modes.
16. Could not delete the Skype Icon in the Recycle bin as it was being held by $R03LAFF.exe.
Fourth Install
1. Logged in to local admin account.
2. Got Skype 6.21.32 from CNET’s download.com and Saved to download folder.
3. Disabled Wi Fi connection, antivirus and malwarebytes.
8. Ran Skype Setup. Got Exception EOlesysERROR in module Skype.exe @ 00129D69. Also got Access Denied when trying to
run the executable.
4. Admitted defeat to myself and to the standard user of the laptop.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support is required. Uninstalled and tried to install again several times. Using Windows 7 64 bit on laptop.

Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?

See Troubleshooting issues with iTunes for Windows updates.
tt2

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe application error . . . . I now cannot open any PDF's. Adobe seems to be unresponsive.

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe
I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
Please help!?

Disabling Protected Mode should fix the problem. But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry. If you tell me your installed Reader version, I can give you a registry script to do that.

InitCVIRTE generates error message "Unhandled exception in "MyApp.exe": 0xC0000005: Access violation reading location 0x00000000."

Hi,
I have converted a LabWindows CVI project to Visual Studio 2005. When I start the application i debug mode I get the message "Unhandled exception at 0x685662ba in EE352-500V.exe: 0xC0000005: Access violation reading location 0x00000000."
It comes when the application calls: InitCVIRTE in this context:
int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpszCmdLine, int nCmdShow)
// Initialize LabWindows/CVI run-time library
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
The debugger indicates that value of hInstance is 0x00400000 {unused=9460301}
Can someone give me a solution to this problem. I have done some search on the Web without success.
Thanks!

I think that exception might be coming from the data execution prevention service that is part of Win XP SP2. The OS thinks that you're somehow trying to execute in the data segment and kills the process. It's intended to catch worms and viruses.
You can turn this service off for non-Microsoft programs using the control panel.
Many pointer handling errors now report as this exception instead of as a memory violation exception. That looks like a null pointer derefence to me.
Menchar
Message Edited by menchar on 11-09-2007 07:12 PM

Error Message: An Exception occured in the module: ibstdc++.6dylib

Hi,
I am just trying to open a cracked VST effect plugin in Cubase, when I get this message:
"An Exception occured in the module:libstdc++.6dylib". This effect plug-in is iLok protected, so you usually have to extent the expiry every 14 days with a ilok rester, which I tried but haven't been able to do yet. Now the cubase crashes every time I try to open this plug-in, popping up this error message. Can someone help me out?
Thanks
BTW; you can spare me with buying the product speech etc. I can't afford a $7000 plug-in bundle in this life time.

Wrong place if you want someone to help you hack a 3rd-party thingy.

Lost SMS Icon and get error message Uncaught exception Index 20 = 20

Dear All
I have lost my SMS Icon and looking at previous forums have carried out the following techniques which do not work
1. I have gone to Messages - Options - SmS & Email Inboxes - Seperate but this does not solve anything
Within this step i have switched off phone taken out battery etc...
2. I have gone to Applications - menu - "show all" but my SMS icon cannot be found
Just to note even when i go to Messages - View Folder - SMS Inbox .....i get the error message again
Uncaught exception Index 20 > = 20
Anyone able to help ? Would be greatly appreciated.
Thanks

You may have already figured out your fix - but yesterday I went thru the same thing with my son's phone. Overnight he lost his SMS & MMS Icon and was receiving Uncaught Exception Index 28 >= 28. I called Verizon Tech Support and was told there was a corrupt file in the calendar.
We backed up the phone using the Desktop Manager - performed a security wipe and restored his phone.
His phone is back up and running as it should be. Hope this helps.
Laura

UPK v11.0.0 Developer Error Message: "An exception was detected..."

A developer on my team is receiving the following error message while attempting to record content in SAP (specifically clicking on the status bar):
+“ An exception was detected in Developer message processing thread. Developer will be shut down."+
UPK then closes and no work is saved. Has anyone else encountered this error?
Regards,
Andrea F.

I just received a similar message "The message processing thread locked up. Developer will be shut down..." This occurred when I tried to end a capture session by pressing Print Screen. I was never returned to the Developer and after waiting for several minutes the message appeared. I guess I'll be submitting a ticket with Oracle as I can't find any references to this error.

I got the following error message "The exception unknown software exception (oxc00000d) occured in the application at location Ox72b852c5" What does it mean and how do I fix it?

I am experiencing the following error message - Oxc0000022 as well - I have to open many of my programs as the administrator or I can't open them.

The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

Is it possible to circumvent error message within a function module?

Hello friends,
Is it possible to circumvent error message generation from within a function module? My program calls a FM (namely FKK_S_CADOCUMENT_WRITEOFF) to do some updates. However, in certain cases this FM throws error messages and terminates the whole process. I cannot control the aftermath because it never gets back to the calling program.It stops at the FM level and not at my program level.
In essence, what I would like to do is to let the FM do its thing, generate some kind of exception (but no error message), come back to the calling program, and then I can capture the status in my program and do what is necessary from then on.
Your help is greatly appreciated

Hi,
Do not use Excerption Tab.
Instead declare a variable or Structure at export parameter.
Which will return you error Description or Status of the FM.
For Example.
Goto Se37 ---> key in FM name of yours.
Go to Table tab
At Parameter Name Column key in RETURN, Type as LIKE and Associate type as BAPIRET2.
ThankS & regards,
ShreeMohan
Edited by: ShreeMohan Pugalia on Aug 10, 2009 12:31 PM

Catching error message from standard function module to internal table.

Hi,
i am calling a FM in my custom prog.
After execution of the FM some auto generated errors is getting displayed.
I want to pass this error to an internal table.
Please tell me how to do this?
    CALL FUNCTION 'FORMAT_CHECK'
      EXPORTING
        i_checkrule   = t005-prbkn
        i_checkfield = it_ven-bankn
        i_checklength = t005-lnbkn
        i_checkmask   = space
        i_fname       = fname
      EXCEPTIONS
        not_valid     = 1
        OTHERS        = 2.
IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
I want to catch this particular error message in the itab.
Thanks,
SAM.

Even we can create an internal table nad move the messages to it.
DATA : BEGIN OF L_ERR OCCURS 0,
        SNO LIKE SY-tabix,                                  "serial no
        MSGTY LIKE SY-MSGTY,                         "message type
        MSGNO LIKE SY-MSGNO,                        "message no
        ERR_TEXT LIKE T100-TEXT,                     "message text
       END OF L_ERR.
   IF SY-SUBRC <> 0.
          L_ERR-SNO      = SY-TABIX.
          L_ERR-MSGTY    = SY-MSGTY.
          L_ERR-MSGNO    = SY-MSGNO.
          L_ERR-ERR_TEXT = TEXT-015.                        "Problem encounterd in uploading data.
          APPEND L_ERR.
          clear L_ERR.
     ENDIF.

How to add an error message in the application module?

Hi,
I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
How could I achieve this?
I am using JDeveloper 10G
Thanks

Muhammed,
Have you tried throwing a JboException in your AM code?
John

Error message when using function module HRIQ_TESTRESULTS_CREATE

Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL:           01
OT:          ST
OBJID:     Student ID
TESTRESULTS_HEADER:
ISSUEDATE                      08.02.2010
VALIDDATE                      30.04.2010
TEST_GUID
TESTEO                         50000269
TRANSEO                        00000000
TESTTYPE                       EXAM_UB_ING
SESSIONID                      T1
SESSIONYEAR                    2010
ENTRYDATE                      08.02.2010
TESTPASSFAIL
TESTTOTRES                     458
TESTSCALE_ID
TOTALPERCENT1                   0,00
TOTALPERCENT2                   0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID            GRAMMAR
SUBTESTTRES      GRAMMAR
SUBT                     203
SUBTESTID            READING
SUBTESTTRES      READING
SUBT                     120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
Araceli

Araceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh

Having trouble downloading itunes on my computer. i keep getting a error message that reads: apple sync notifier.exe- entry point not found.

Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
Ikeep getting a error message reading:
#1 applesyncnotifer.exe- entry point not found.
#2 the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
#3 service 'apple mobile device' (apple mobile device)
failed to start. Verify that you have sufficient privileges to start system services.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

How to Respond to Error Message..."Close ElementsAutoAnalyzer.exe"

I just installed Photoshop Elements 11 and Premiere Elements 11 on my computer. After installation I checked for updates. The first update was for Elements Camera Raw but shortly after it started I received an error messaage which read, "Close ElementsAutoAnalyzer.exe". I closed Elements 11 application and clicked on "Continue" in the remaining window. The same error message appeared after a few seconds. There weren't any other open applications so I didn't know how else to close the Auto Analyzer. Can anyone offer advice?

Go to the organizer preferences>media analysis and turn it off there. If that fails you can do it in task manager (win) or applications>utilities>activity monitor (mac).

Error message "exception exception in module dd.exe at 00074fc9. dm.c

Similar Messages

Maybe you are looking for