Error message external flash attached, 60d

I cannot use the built-in flash on my 60d, checking the menus I get the message that their is "An external flash attached"

Read the last message here, it may be the answer.
http://forums.usa.canon.com/t5/Speedlites/What-is-cause-of-internal-flash-on-60D-not-functioning/m-p...
"A skill is developed through constant practice with a passion to improve, not bought."

Similar Messages

Error messages when I attach iPad;

I keep getting an error message when I attach my iPad/iPhone and try to go to iTunes:
"The registry settings used by the iTunes drivers fro inmportng and burning CDS and DVDs are missing. This can happen as a result of installing other CD burning software. Please install iTunes" I HAVE UNINSTALLED, INSTALLED SEVERAL TIMES; TRIED "REPAIRING", TOO.
It took an hour to load 10 songs last night to iTunes from a CD to load on iPad/Phone.

NO, you have to edit the registry like below (do it with extreme care):
Open Registry Editor:
XP: From the Start menu click Run. In the resulting dialog, type "regedit" (without quotes) and click OK.
Vista: From the Start menu, in the Start Search dialog, type "regedit" (without quotes) and press Enter.
Windows 7: From the Start menu, in the "Search programs and files" dialog, type "regedit"(without quotes) and press Enter.
If Windows needs your permission to continue, click Continue.
Click the plus sign (XP) or arrow (Vista and Windows 7) next to HKEY_LOCAL_MACHINE to expand its contents.
Expand the contents of SYSTEM.
Expand the contents of CurrentControlSet.
Expand the contents of Control.
Expand the contents of Class.
Click to select the heading that begins with "{4D36E965-" (you just need to highlight this folder). It should look like this:
From the File menu, click Export.
In the dialog box that appears, make sure the "Selected branch" radio button is enabled, then save the file somewhere that you can find it later. This is a backup of this registry key. You should hang on to this in case you need to reimport your original settings later.
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
If the UpperFilters entry is missing, follow these instructions: Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.
In the window that appears, use the appropriate steps below to add iTunes device filter to the "Value data" box. If the "Value data" box already contains text, follow these instructions: The text contained in the "Value data" box represents third-party device filters. If you remove these device filters, the third-party software that installs them may stop functioning properly. In the example below "NTIDrvr" and "SiRemFil" represent these third-party device filters.
Click in the box below this text. This accomplishes two things. First, it removes the highlighting from the text. This way when you start typing it won't overwrite these device filters. Second, it places the cursor below this text.
Now, type "GEARAspiWDM" (without quotes) to add the iTunes device filter.
If the "Value data" box is blank, follow these instructions:
Type GEARAspiWDM to add in the iTunes device filter. See the example below.
Continue on with the next step.
Click OK.
Restart the computer.

An error message is flashing continously on my iphone4 screen. How to get rid of this?

Error message is flashing continously on my iphone4 screen. How to get rid of this?

i was just pointing you in the right direction
thanks for the star and ... happy computing !
JGG

Error message: Adobe Flash Player 11.6 r602 stopped working and was closed

I keep getting this error message: Adobe Flash Player 11.6 r602 stopped working and was closed.

elmer33 wrote:
I loggin by selecting "Run as Administrator". Does this qualify as being logged-in as Admministrator? If so, this still does not allow deletion of the intended file.
Thanks for your suggestions.
Use File Assassin. If it can't remove it. it CAN'T BE REMOVED.

Mystery with SE3320 - Error message "External SCSI BUS Reset

We have had this problem for several weeks and have been unable to resolve with much trial & error attempts.
Appreciate the help of the Sun community!
=============
*Initial Problem: During Sybase installation on E2900 server. During "create database" stage, which involved a lot of harddisk operation, the system showed external reset error message for several disks on StorEdge 3320
During mirroring process, we always getting error message "External SCSI BUS Reset" then "target xxxxxx reduce sync transfer rate". We suspect that we have a wrong cable as of we are using P/N 530-3631-01 instead of 530-3631-02 as mentioned on SE3320 Product Manual. Unfortunately, we do not have the suggested cable with us, if you believe the problem is with the cable? Now we are trying to re-seat connections as well as change available SCSI cables just to find our luck. We are also suspicious if we need jumpers and terminators.
2 (two) faulty storages condition now is still in the SAME with condition when we raised complaint which is error message during high load I/O operations. In total, we have 6 SE3320 Storage, and the error messages only occur for this 2 faulty storage systems. It is true that mirroring will still created sucessfully regardless the error messages, however after error messages, I/O speed for that disk will be reduced.

Correction to my previous post: the "burn" button is not visible when browsing through the music library, only in the "purchased" or "playlist" views (which is really confusing, by the way.)
that's normal. you'll only see it in a playlist of some description. (the "Purchased" list is a playlist.) see:
I'm having trouble burning a CD or DVD
is that a home-built or custom-built PC? (checking, because it makes a difference when going checking for updates to drivers and whatnot.)

Error Message when opening attached doc with Mac for Word 2008

When I try to open attached docs of any any sorts (mainly word/pdf) I get an error message that wont allow me to open the attachments, please help!!
I have MB Pro with Mountain Lion

There are some things I can open but word docs and pdf docks I cannot open, here's the error

I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
Write Status is Read/Write
SMART Status is Not Supported
Partition Map Scheme is Master Boot Record
HELP!
timothy7712

You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

Unable to publish projects with inserted video - error message The Flash video can not be loaded

I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.

Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Output Error Message in Flash 8

Hi All,
I'm building a form in Flash 8 that includes check boxes.
When I add the check boxes and test the movie I get the following
output error message:
**Warning** The linkage identifier 'CheckBox' was already
assigned to the symbol 'Assets/UIComponents/CheckBox', and cannot
be assigned to the symbol 'CheckBox', since linkage identifiers
must be unique.
For the life of me I can't get rid of this. Anyone know what
the heck is going on?
Thanks,
Scott

It appears that the OP has created a MovieClip symbol and
named it CheckBox, then has chosen to export for actionscript. The
CheckBox component needs to have that identifier to function
correctly. So the OP needs either, change the linkage ID on the
symbol named "CheckBox", or take the linkage ID off
completely.

MIRO error message not flashing

I am trying to flash the error message when inspection lot not found but it is not flashing the hard coded error message.
Then I tried to use function module MRM_ERRMSG_COLLECT and used the below code
CLEAR wa.
          wa-MSGTY                 =                   sy-msgty."   'E'.
          wa-MSGID                 =                    sy-msgid."'00'.
          wa-MSGNO                 =                    sy-msgno."'001'.
          wa-MSGV1                 =                    'QA acceptance is not made for the inspection lot'.
         MSGV2                 =
         MSGV3                 =
         MSGV4                 =
         wa-SOURCE               =                      'P'.
         wa-RBLGP                 =                    '000000'.
         SHOWN                 =
APPEND wa to error_tab.
CALL FUNCTION 'MRM_ERRMSG_COLLECT'
EXPORTING
    i_xcustom        = 'X'
I_XCOLLECT       = 'X'
    i_msgid          = wa-MSGID
    i_msgty          = wa-MSGty
    i_msgno          = wa-MSGno
I_MSGV1          =
I_MSGV2          =
I_MSGV3          =
I_MSGV4          =
I_SOURCE         = ' '
I_RBLGP          = 0
tables
    t_errprot        = error_tab
CHANGING
X_ERROR          = ' '
In this case it isllowing the document to save.
Please help

Thasnks All,
I have found a solution to it.
We need to add the messages in FI message class.
and pass it in the exit like this.
MESSAGE id wa-MSGID TYPE wa-MSGty number wa-msgno .
change wa-msgno to the message number you have goven to your nes message

Error Message in Flash

Hello there,
I keep having problems in flash. I have created a webpage
gallery of 11 images. Once I finish it and test it. Everything
works. I then go to save it. And that works. But I have use .psd
image files because I know flash has better compression that way
and smaller published files. I am having problems when I go to Save
and Compact. I get the error message:
quote:
Could not open one or more scenes probably because of low
memory.
To increase available memory close open documents.
Well if you look at the image
here
there is only one other file open and it's new and has one little
square in it. I have only 4 other programs open. None of which are
doing anything. My Ram is not an issue because I have 2GB ram and
right now I currently have over half a gig left available! So is
there any reason this isn't working? I am just trying to update an
already existing web gallery (
http://scotbarchitects.com/root/potomac1gal.html
) with new pictures and also taking the .jpg's that I have in there
and replacing them with .psd for faster load times.
Any ideas.
Oh also after that error message comes up and I click it a
couple times, I cannot open my file. So then I have to redo the
whole Gallery!!

Do PNG files compress as well as psd files?

Error Message on Flash Update

While trying to install an update for Adobe Flash I recieved this error. I can't seem to find anyone to help with this. There aren't any email addresses etc that are available.
the following is the exact error message I recieved. I haven't had problems prior to this for installing updates.
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
So, I need assistance to update.
Debora Moes
Cold Lake Alberta
[email address removed]

What is your operating system? Try the offline installer
Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
P.S. this is a public forum; please do not post your email address or other private data!

Error message re flash download

I received this error message - any advice?
Adobe Reader could not open 'install_flash_player_osx_ub-6.dmg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Try to download the installer from
http://www.adobe.com/products/flashplayer/fp_distribution3.html

Error Message: External program terminated with exit code 2

Hi ALL
We are doing REORG tablespace in DB13 and i am getting below error message. Please help us to resolve the issue.
20100430 113234 DB6PM 000 Reorg_Tbspc:Command DB6CLP failed on server
20100430 103959 DB6PM 000 Reorg_Tbspc:Exitcode:Error
20100430 103959 DB6PM 000 Reorg_Tbspc:ERRORMESSAGE: An SQL error occured. Will print output of the command
20100430 103959 DB6PM 000 Reorg_Tbspc:External program terminated with exit code 2
20100430 103959 DB6PM 000 REASON=C call failed
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 30, 2010 6:55 AM

Exitcode 2, if returned from the OS, means "No such file or directory". Note that as of SAP kernel release 7, you usually do not have DB6CLP any more. Can you check if the executable is available in the SAP exe directory ?
If running SAÜ kernel 700 or higher, I suggest to apply a recent SP level.
Malte

Error Message on Flash installation

I tried the fix suggested by johndiablo - downloaded flash
installer then downloaded IE "standalone" Flash 9 installer. Now I
get an error message "Flash Player ex is not a valid Win32
application. What's it all mean?? Will I ever get Flash installed?
Thanks. annievg

What version of Mac OS X? Be aware that Studio 8 is quite old and may not be supported on later versions of Mac OS X. In fact the reference to <Flash Carbon Player> suggests this, as Carbon is being deprecated (it was a way to bridge the old pre-mac os x codebases and bring them over to Mac OS X). It may be time to upgrade/update your software.

Error message external flash attached, 60d

Similar Messages

Maybe you are looking for