Error message F:\setup.EXE on Equium

I have just started having problems with Equium laptop, trying to install some software all i now get is
F:\setup.EXE
The directory name is invalid.
Could really do with some assistance if possible.
thanks

Maybe more info can help. How to start with this two short sentences?

Similar Messages

Error message iTunes64 Setup.exe is not a valid Win32 application.

I've tried a few times to update my laptop with latest version of iTunes, even have uninstalled older version, and I just keep getting this message. What am I doing wrong? How do I fix it? I have Windows 7, 64-bit system.
I wouldn't have even tried to update, but when I plugged in my new iphone 4S to download my itunes librarby to it, i was prompted to get the most recent version. Now I don't have anything. HELP!

Perhaps try downloading and saving a copy of the installer to a different (64-bit) PC. Copy the iTunes64Setup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunes64Setup.exe file.
Does that go through any better for you?

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I am getting an error message Aps Daemon exe system error 1cud49dll...what can I do to fix this???

I am getting an error message Aps Daemon exe system error 1cud49dll. I cannot reinstall itunes...help please!!!

See Troubleshooting issues with iTunes for Windows updates for tips on repairing the iTunes installation.
tt2

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

When sending an email through windows live I get an error message from WebKit2WebProcess.exe

Hi,
Every time when I try and send an email from windows live I get an error message from WebKit2WebProcess.exe.
Not sure if I deactivate this from Windows live whether I will compromise my security.
Any advice would be helpful.
Thanks,
Becky

Thank you Matt. I'm sure this will be frustrating ...but the more I think about this problem there more info I have to share. The emails I write that do not get sent do end up in my "sent" folder but never reach the recipient. And, most perplexing, the issue/problem is sporadic. It was coming and going before I switched over to the SSL/TLS option in T-bird. And...since the switch it has reappeared and disappeared. I have made zero changes other than the above mentioned. I did get a security update today for T-bird perhaps this will help?
I read your link, thank you.
I obviously don't understand how these systems work. I'm baffled how an issue like this can come and go...

Equium A60: I get error message using explorer.exe

Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
Jonathan

Hi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards

When trying to download Firefox 7, I receive the error message "Firefox Setup 7.0.1.exe contained a virus and was deleted". I tried to disable my sercuity software (ESET) and have Windows Defender shut off, but still receive this message.

I just got a new computer and am preparing my old computer to give to my nephew. The old machine runs system 7 and was running FF 7.0.1. I completely removed Firefox to erase all of my data. When I tried to reinstall Firefox, I began getting this error message.

chs55 wrote:
I have tried shutting down my anti-virus software, to include Windows Defender, but it didn't help. I am running the AVG free anti-virus.
But you still got the message? If so, you didn't get everything shut down. Something has to be giving you that message.
More than likely, it's a false-positive. Happens quite a bit with updates when the AV companies haven't caught up with their definitions.
If you didn't get the message after disabling all your AV stuff, what DID happen?

Error while running setup.exe for oracle installation on windows 2003

Hi,
I am trying to install oracle 9.2.0.1 on my windows 2003 machine and when i click on setup.exe nothing happens. when i tried to run it thru command prompt again nothing happens when i check in computer management => event views it throws following error.
The application, C:\DOCUME~1\barb\Local Settings\Temp\1\OraInstall2006-08-11_05-19-46AM\jre\bin\javaw.exe, generated an application error The error occurred on 08/11/2006 @ 05:19:56.356 The exception generated was c0000005 at address 6D4CF9A0 (jvm!JVM_TraceMethodCalls)
can anybody suggest me what could be the problem or i will have to install jvm first and then try installing oracle?
thanks
Chandan

did you check the installation guide and Preinstallation Requirements?
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417

Flash Player error message when starting .exe

I have published a quiz on our local intranet in .exe format.
It runs fine and actually submits results (unlike the .swf files)
via Outlook. I created the quiz on a Windows XP machine running
Captivate 2.
The only problem I am finding is with certain machines, when
they go to run the quiz, they get a FlashPlayer error message that
says : "Cannot create file C:\DOCUME~1\iddem\LOCALS~1\Temp\Personal
Care final.swf" . On other machines, I don't see the message at
all.
If they click OK, it runs the quiz fine. My question is
whether there is a setting in Captivate I can change to avoid
having users see this message.
Thanks for any help you can provide -
Anne Goldenberger

I don't know for sure, but believe an .exe is (supposed to
be) the Flash
Player and the .swf file essentially 'zipped' up into an
.exe. So when
you open the .exe, it auto-extracts to the user's temp folder
and the
swf is told to play using the bundled Flash player.
HOWEVER, recent posts indicate at least some of that is not
true, or not
working as it should, in that if a user doesn't have the
Flash player
installed, the .exe won't work (swf doesn't play). So perhaps
the issue,
assuming my previous assumption is true, is the .exe is
supposed to make
the Flash player available but is not, or is directing the
swf to use
the installed player instead...which fails if the player is
not
installed....
SO, point being if that's all true, that's why the user's
temp folder
may be coming into play - the .exe is trying to extract to
that
location. Is the folder path different for each user -
showing their
username in the temp folder location?
Why the error is occurring or how to fix it, I'm not sure.
Emptying the
user's temp folder sounds valid. Maybe it's just too 'full'
and hitting
some quota limit? Or perhaps the temp folders have some sort
of
permissions restriction (which would be silly)?
At least the file works despite the error...
Erik
Anne L Goldenberger wrote:
> Thanks for your response Larry. What really seems
strange to me is that the
> error message comes from Flash - which seems really odd
since what I published
> was an .exe file - NOT a .swf file. When the .exe runs,
maybe it is trying to
> 'create' a .swf file???
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Latest Fx version won't download, getting error message. "pSVzV7gx.exe.part source file cannot be read.

I have attempted to download the latest version of Fx. I get the message "pSVzV7gx.exe.part can't be downloaded because the source file could not be read".

Hey,
Thanks for your response. I've checked in the about itunes and it says the MacBook's itunes details are as follows
11.05.5 (5)
64 bit
copyright 2000-2013
I imagine the iMac has the lates itunes on it although I cannot check because it brings up the error message as described above. Any help will be appreciated.
AJ

What is causing this error message? FlashPlayerPlugin_11_9_900_117.exe-Application Error the exception unknown software exception (0xc0000710) occurred in the a

I keep getting this error message every time I open certain sites such as Facebook, Wayfair, etc. I have uninstalled Flash many times and re-installed it many times but keep getting this message.

I had the same problem.
I went through the troubleshoot and it's not the extensions etc.
The Adobe Flash Player Plugin version 11.9.900.117 seems to be the problem.
Flash still plays fine, just the pop-up happens and not sure why.
If it's annoying you, try installing the older version:
Uninstal this version (v11.9), and re-install the older version (v11.8)
You can find older versions on :
''http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html''
To test this, I installed this version :
''(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)''
It downloads a zip file, which contains 7 files, I ran the file :
''flashplayer11_8r800_168_win.exe''
And now the pop-up does not happen.
==================================================
Note 1: I did this:
:1: uninstall v11.9
:2: open firefox (so I'm opening up firefox without flash)
:3: go to youtube = a popup to install flash appears, click to install
The version it offered was not 11.9, but 11.8 : strange! why not v11.9?
: anyway, if you try to install v11.8 this way, it always fails
==================================================
Note 2:
This problem only happens on my main home desktop and does not happen on my other machines (which all are Firefox Sync-ed, so all running same extensions etc...)
Strange!
==================================================

Occasional error message saying "Labview.exe has stopped working"

Hi,
I am using Labview 8.0 on a Windows Vista operating system to communicate with lab instruments through GPIB. Occasionally, when one of my programs finishes running, an error message appears saying "Labview.exe has stopped working". The error window gives me the option to close the program or debug. After clicking debug, Windows cannot find the source of the error and the all labview applications get closed. Any ideas? Thanks.

The code that I have been having an issue with is attached. The main program is called "Frequency Sweep Real Time2". The other two attachments are subVI's used within the main program. I am a young programmer and I have never had any official training with Labview so sorry if my Labview programming is unconventional or just plain bad. Thanks to whoever looks this over.
-Ryan
Attachments:
Frequency Sweep Real Time2.vi ‏443 KB
Read multiple values.vi ‏26 KB
Save_data2.vi ‏22 KB

How does the Error Row Definition and Error Message Lookup setup work?

Suppose I use web ADI to load data to PA_TRANSACTION_INTERFACE_ALL (This is Oracle standard Interface table for Projects)
I call a Importer (The Importer is called post upload of data to above Interface Table). The Importer will update the Interface table columns (TRANSACTION_STATUS_CODE) and (TRANSACTION_REJECTION_CODE) with values based on the clearing all validations. If validation fails, the column, TRANSACTION_STATUS_CODE is updated with value 'R' and TRANSACTION_REJECTION_CODE has the error code. This error code is stored in the Lookup, with Lookup Type = 'TRANSACTION REJECTION REASON'
I define the Error Row Definition as follows -
select * from PA_TRANSACTION_INTERFACE_ALL where TRANSACTION_STATUS_CODE = 'R' and BATCH_NAME = $param$.batchname (BATCH_NAME is populated in the Web ADI Template)
I define the Error Message Lookup as -
select meaning from apps.fnd_lookup_values where lookup_type ='TRANSACTION REJECTION REASON'
and language='US' and lookup_code = $param$.TRANSACTION_REJECTION_CODE
I have defined the , Document Row : Interface Attribute Mapping - with the column, ORIG_TRANSACTION_REFERENCE (THe column with the Unique value for a row and links the Excel row with the Interface table)
I feel my setups are fine. Still why the Error -
An error has occurred while running an API import. The ERRORED_ROWS step 275:ER_501996, parameter number 1 must contain the value BIND in attribute 1.

Duplicate post -- https://community.oracle.com/thread/2615675

Error message F:\setup.EXE on Equium

Similar Messages

Maybe you are looking for