Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF
After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!
I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.
Similar Messages
-
Hi,
I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
Thank you!
StacyI fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps. -
Failed to load an application resource (Internal Error)
Hi,
Running Leopard MAC OS/X 10.5.6 and Adobe Reader 9.1.0. Is anybody going to fix this problem???? Which happens when you try to run Preferences. I won't even mention the fact that I cannot print either. Ooops, I just mentioned it...
Thanks.
SusanThe same problem occurs for me.
The error Failed to load an application resource (internal error) appears when viewing preferences inside the application.
Like wise, when printing a similar error message is shown.
I have uninstalled the application, all adobe products on the system, removed application support files, preferences, PDF preferences and reinstalled. The problem still exists.
I installed the same version (v9.1.0) on another mac that had never had Acrobat installed before and the problem does not exist. I am able to view preferences and print.
Both are intel based Macs running 10.5.6.
Given that it works on one mac and not the other, what would be causing this?
Also is there an uninstall tool for Adobe Acrobat Mac from Adobe? -
Failed to load an application resource (internal error) win XP
I am
trying to correct the problem of not being able to open .pdf files from internet websites.
This is the error that I get when I go to edit
- preferences in adobe reader. Anyone have any advise? Greatly appreciated. Windows XPI fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps. -
I get this error 4 times when I open reader and can;t repair or uninstall it 11.0.06 (Mircrosoft windows search filter host needs to be closed).
Windows 7I haven't installed any third-party plugins. However, looking at the list of plugins, I see that there are two copies of ECMAScript: EScript.api dated 12/18/12, and EScript_AVG_RESTORED.api dated 1/21/13. So my bet is this is a side-effect of my anti-virus blocking the JavaScript security hole that was fixed by Java 7 Update 11. I deleted escript*.* from C:\Program Files (x86)\Adobe and the errors have gone away.
-
Reader 10.1 "Failed to load an application resource"
Hi
I upgraded from Reader X (10) to 10.1. Since then every time I start it, whether as a standalone or plug-in, I get one or more instances of an error message which says "There was an error during initialization. Failed to load an application resource (internal error)." I also note that there is no plug-ins menu.
This is getting annoying, to say the least. I am running Windows Vista SP2. Googling produced nothing relevant.
Does anyone have any ideas?
Thanks
LukeThanks.
Both. In Vista Add/Remove Programs gives a "Change" rather than a repair option but it runs the repair either way, says everything is ok, but it isn't.
Screenshots below
Luke -
Error message "Failed to load book because the requested resource is missing" on iPhone
I purchased 3 books in itunes to read on my iphone using ibooks. I have synced and I can see the books in my iBooks bookshelf, but when I try to open them I get an error message "Failed to load book because the requested resource is missing". I have tried opening the book again, deleting and resyncing but nothing seems to work. Any suggestions?
I was having the same probem.
I found success when I shut my iphone down all the way (press and hold power button then "slide to power off")
then started it back up. My phone was linked to my computer at the time, so it went through the sync - not sure if that is important. But, I can now read my books!
Good luck -
I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
many thanksHello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H. -
HT5557 message failed to load because requested resource is missing.
Cant redeem on I tunes no purchased books on I books Message failed to load because resource is missing.
Hi vbCoach1!
If these items were purchased from the iTunes Store, then you can find an article about re-downloading past purchases right here:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
80073712 Error Message can't load Apple Application Support Windows 7
I cannot get iTunes to load. Apple Application Support error message 80073712. I have tried all Apple website solutions and they don't work.
I would like an aswer to this too if anyone knows it.
-
Error message: Failed to load Main-Class manifest attribute from local_poli
OS: SLED 10 SP3 (Linux)
Production Installation: to have the freebXML.org "Hermes2" work on nhn.no
Hermes, apache-tomcat, jce, are all installed in same directory, and the first steps of Hermes installation is OK, but I cannot reach Hermes in http://localhost:8080, and I wonder if the JCE is part of this.
I need to have the JCE Ecryption Extension installed, but upon trying <java -jar local_policy.jar> the error message comes like this:
*" Failed to load Main-Class manifest attribute from local_policy.jar "*
I am uncertain why this message comes.816248 wrote:
>I need to have the JCE Ecryption Extension installed, but upon trying <java -jar local_policy.jar> the error message comes like this:
*" Failed to load Main-Class manifest attribute from local_policy.jar "*
I am uncertain why this message comes.
I'm uncertain why you think you need to execute "java -jar local_policy.jar" since the jar file local_policy.jar has no executable parts and is simply a container for two 'policy' files. Can you post a reference to the documentation that says you need to do this?
The only time you are likely to be directly interested in this jar file is when installing the 'unlimited strength' jar files when it is replaced. -
Error message "failed to load Tosrfcom" on Satellite Pro U200
hi
I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
after restart, even for the first time, have the following error in Event Log:
Log Name: System
Source: Service Control Manager
Date: 07.07.2007 01:29:15
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: toshiba
Description:
The following boot-start or system-start driver(s) failed to load:
Tosrfcom
under:
http://www.eventid.net/
cannot find any solution !
knows someone howto solve this problem ?Hi
After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
The driver was installed in the registry under this entry:
HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
I dont see many solution ways
Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center. -
Hi,
I'm using Windows 8.1 and I can see photoshop CC 64 bit. But when I'm launching it, it throws an error "Some of the application components are missing from the Application directory, Please reinstall the application". I've reinstalled twice but getting the same error. Whereas the 32 bit application works fine. Any help?Branching this to a new discussion.
Govinda_s13 are you still receiving the error messages referenced above? -
Error Message on a Extended Fiori application
I'm currently trying to Extend and modify a SAP Fiori application
The SAP Standard application is installed and working successfully in our system at the moment.
When i'm trying to launch our extended Z Application i get the following error message
Failed to resolve navigation target: #SAP_HCM_LVExtension-View - Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/INTEROP/ResolveLink?linkId='SAP_HCM_LVExtension-View'&shellType='FLP'&formFactor='desktop'": HTTP request failed
Details: Launchpad ZHCM_APP / TRANSACTIONAL / SAP_HCM_LVExtension does not exist.
In LPD cust we have the link text of SAP_HCM_LVExtension
An Application Alias of SAP_HCM_LVExtension
Any help would be appreciated !
Cheers
JamesHaving the same issue, did you have any luck solving this?
-
i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
I have tried uninstalling itunes and re-installing it.
Turning off firewall and antivirus.
Has anyone had this before and if so how did you over come this issue?
Thanks in advanceHey troyboi12345,
Thanks for using Apple Support Communities.
To troubleshoot this issue, follow this article.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Have a nice day,
Mario
Maybe you are looking for
-
I know how to empty my iPhoto Trash but I can't find the bin. I have iPhoto 7.1.3. I can't find anything in the Preferences to tell me where Trash is. I would like to see what's in the trash before emptying. Thanks, EST
-
How to Disable Automatic Java Update
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy EnableJavaUpdate Type=REG_DWORD Data=0x000000000 (1) Replace 1 with 0 and you are good.
-
There seems to be a limit of only 10 steps for the Value Axis. Is that true? Also, when I try to set a maximum value of 4 for the Value Axis, it keeps defaulting to 96.00. Any idea why? Also, is there a limit to the number of characters, entries, or
-
Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing
Hello All, For Complaint in CRM change in default item category gives the captioned error. The error is there for all Sales Organisations. Any suggestion how this error can be removed. Thanks & Regards, DP
-
Machine shows Non compliant in SCCM 2012R2 Configuration Manager
We are using 2012 sccm R2 and one of our client machine shows non compliant in the reports. When we check the machine , we found that all the required and approved patches are downloaded . So it should be a compliant machine . SCCm Clinet is ACtive a