Error message "failed to load Tosrfcom" on Satellite Pro U200

hi
I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
after restart, even for the first time, have the following error in Event Log:
Log Name: System
Source: Service Control Manager
Date: 07.07.2007 01:29:15
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: toshiba
Description:
The following boot-start or system-start driver(s) failed to load:
Tosrfcom
under:
http://www.eventid.net/
cannot find any solution !
knows someone howto solve this problem ?

Hi
After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
The driver was installed in the registry under this entry:
HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
I dont see many solution ways
Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center.

Similar Messages

I'm trying to load my newspaper and I keep getting the error message Failed to Load Kiosk, I've done a restore but no joy - any ideas?

I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
many thanks

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Error message "Failed to load book because the requested resource is missing" on iPhone

I purchased 3 books in itunes to read on my iphone using ibooks. I have synced and I can see the books in my iBooks bookshelf, but when I try to open them I get an error message "Failed to load book because the requested resource is missing". I have tried opening the book again, deleting and resyncing but nothing seems to work. Any suggestions?

I was having the same probem.
I found success when I shut my iphone down all the way (press and hold power button then "slide to power off")
then started it back up. My phone was linked to my computer at the time, so it went through the sync - not sure if that is important. But, I can now read my books!
Good luck

Error message: Failed to load Main-Class manifest attribute from local_poli

OS: SLED 10 SP3 (Linux)
Production Installation: to have the freebXML.org "Hermes2" work on nhn.no
Hermes, apache-tomcat, jce, are all installed in same directory, and the first steps of Hermes installation is OK, but I cannot reach Hermes in http://localhost:8080, and I wonder if the JCE is part of this.
I need to have the JCE Ecryption Extension installed, but upon trying <java -jar local_policy.jar> the error message comes like this:
*" Failed to load Main-Class manifest attribute from local_policy.jar "*
I am uncertain why this message comes.

816248 wrote:
>I need to have the JCE Ecryption Extension installed, but upon trying <java -jar local_policy.jar> the error message comes like this:
*" Failed to load Main-Class manifest attribute from local_policy.jar "*
I am uncertain why this message comes.
I'm uncertain why you think you need to execute "java -jar local_policy.jar" since the jar file local_policy.jar has no executable parts and is simply a container for two 'policy' files. Can you post a reference to the documentation that says you need to do this?
The only time you are likely to be directly interested in this jar file is when installing the 'unlimited strength' jar files when it is replaced.

Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mike

I'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!

2 error messages - failed to install extention 2.1 and output module 2.1

I just tried to update my Encore CS4 from the Master Suite. I have two error messages " failed to install extention Mgr. CS4 2.1 and failed to install output module update 2.1
Encore will load a new project and save but I can't do anything else like add files before it crashes. Any help please. - Art

This might not apply with En CS4, but there were some issues on install, and on updates in Photoshop. It seems that MS had a bum MSI (Installer) version, and it caused a lot of PS installs and updates to fail. Do not recall any specific error messages. The cure there was to download and install the revised MSI module from the MS site. I would imagine that any MSI module would be heavily Windows version-specific. Take that as a warning to check any very carefully, before downloading and installing. MS is pretty good at having a ReadMe with installation instructions for each such download. It almost always contains the exact versions of Windows, that the file is for. Please read any installation instructions carefully.
This might be worth a look. I do not have a link to the exact page, but a search of the MS site should yield something. I'd search for "MSI," to start.
I just do not recall any issues with En and either installation (on proper systems with updated OS's) or with any updates.
Good luck, and please report your success.
Hunt

Exit Code: 16 Please see specific errors below for troubleshooting. For example, ERROR: DW039 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s) ERROR: DW039: Failed to load deploy

Exit Code: 16
Please see specific errors below for troubleshooting. For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File

what os?
what are you doing (or trying to do) when you see that message?

Mac app store error message failed download.

When I try to download an app from the Mac App Store I get an error message "failed to download use the purchases page to try again".
How do I fix this problem on OS Mavericks 10.9.4?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

[SOLVED]Gtk-Message: Failed to load module "canberra-gtk-module"

Hi,
I'm getting this message
Gtk-Message: Failed to load module "canberra-gtk-module"
keepassx: symbol lookup error: /usr/lib/gtk-2.0/2.10.0/engines/libindustrial.so: undefined symbol: gtk_check_version
for various gtk-based applications.
I've read that is fixed, https://bugs.archlinux.org/task/23655.
Using Arch 64 bit, XFCE here.
Any clue?
Last edited by kinu (2011-09-29 13:17:06)

Changing gtk theme do the trick. I get the message, but applications start ok.

Gtk-Message: Failed to load module "canberra-gtk-module"

I get the following error when I try to run gnome-terminal:
$ gnome-terminal
(gnome-terminal:4165): Gtk-WARNING **: GTK+ module /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so cannot be loaded.
GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported.
Gtk-Message: Failed to load module "canberra-gtk-module"
$
I found that libcanberra-gtk-module.so is owned by libcanberra 0.28-1:
$ pacman -Qo /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so is owned by libcanberra 0.28-1
$
And even tried to remove it, but there are other packages which depend on it:
$ sudo pacman -R libcanberra
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: gdm: requires libcanberra
:: kdebase-runtime: requires libcanberra
:: libgnome: requires libcanberra>=0.28
$
If I understood properly it complains mixing gtk-2 and gtk-3 in gnome-terminal process.
I have both versions installed:
extra gtk3 3.0.11-1 [installed]
extra gtk2 2.24.4-2 [installed]
How can I solve this problem?
Thanks!

$ pacman -Qm
bin32-skype 2.1.0.81-3
cdlabelgen 4.1.0-2
cloog-ppl 0.15.10-2
eggdbus 0.6-1
flashplugin 10.0.45.2-1
fontcacheproto 0.1.3-1
gcombust 0.1.55-4
kmldonkey 2.0.2-5
lib32-alsa-lib 1.0.23-2
lib32-dbus-core 1.2.24-1
lib32-e2fsprogs 1.41.12-1
lib32-expat 2.0.1-5
lib32-fontconfig 2.8.0-1
lib32-freetype2 2.4.1-1
lib32-gcc-libs 4.5.0-6
lib32-glib2 2.24.1-1
lib32-glibc 2.12-4
lib32-lcms 1.18-3
lib32-libdrm 2.4.21-1
lib32-libgl 7.8.2-1
lib32-libice 1.0.6-1
lib32-libjpeg 8.0.2-1
lib32-libldap 2.4.22-1
lib32-libpng 1.4.3-1
lib32-libsasl 2.1.23-4
lib32-libsm 1.1.1-1
lib32-libtiff 3.9.4-1
lib32-libx11 1.3.4-1
lib32-libxau 1.0.5-1
lib32-libxcb 1.6-1
lib32-libxcomposite 0.4.2-1
lib32-libxcursor 1.1.10-1
lib32-libxdamage 1.1.3-1
lib32-libxdmcp 1.0.3-1
lib32-libxext 1.1.2-1
lib32-libxfixes 4.0.5-1
lib32-libxft 2.1.14-1
lib32-libxi 1.3-2
lib32-libxinerama 1.1-1
lib32-libxmu 1.0.5-1
lib32-libxrandr 1.3.0-1
lib32-libxrender 0.9.6-1
lib32-libxslt 1.1.26-1
lib32-libxss 1.2.0-1
lib32-libxt 1.0.8-1
lib32-libxv 1.0.5-1
lib32-libxxf86dga 1.1.1-1
lib32-libxxf86vm 1.1.0-1
lib32-mesa 7.8.2-1
lib32-openssl 1.0.0.a-2
lib32-pcre 8.02-1
lib32-qt 4.6.3-1
lib32-sqlite3 3.6.23.1-1
lib32-util-linux-ng 2.17.2-2
lib32-zlib 1.2.5-2
libxfontcache 1.0.5-1
libxxf86misc 1.0.2-1
mysql-gui-tools 5.0r14-4
ndiswrapper-utils 1.56-2
squeeze 0.2.3-4
texlive-bibtexextra-doc 2008.12985-2
texlive-core-doc 2008.13013-1
texlive-fontsextra-doc 2008.13014-1
texlive-formatsextra-doc 2008.11913-1
texlive-games-doc 2008.12626-1
texlive-genericextra-doc 2008.12667-1
texlive-htmlxml-doc 2008.12803-1
texlive-humanities-doc 2008.11969-1
texlive-latex3-doc 2008.10126-2
texlive-latexextra-doc 2008.13033-1
texlive-music-doc 2008.7340-2
texlive-pictures-doc 2008.12087-1
texlive-plainextra-doc 2008.11913-1
texlive-pstricks-doc 2008.12873-2
texlive-publishers-doc 2008.11913-1
texlive-science-doc 2008.12088-1
thunar-vfs 1.2.0-2
thunderbird-spell-ru 3.1-1
ttf-ms-fonts 2.0-3
xf86miscproto 0.9.3-1
xfce4-icon-theme 4.4.3-2
xfce4-messenger-plugin 0.1.0-6
xfce4-playercontrol-plugin 0.3.0-1
xfce4-xfapplet-plugin 0.1.0-7
$
$ env
ORBIT_SOCKETDIR=/tmp/orbit-krivenok
SSH_AGENT_PID=3836
XDG_DATA_HOME=/home/krivenok/.local/share
GPG_AGENT_INFO=/tmp/keyring-GNxCNe/gpg:0:1
GLADE_PIXMAP_PATH=:
TERM=xterm
SHELL=/bin/bash
XDG_MENU_PREFIX=xfce-
HISTSIZE=1000
XDG_SESSION_COOKIE=b79c6be714d24a271b9b97254af70d85-1307951402.186020-1227276077
QT_XFT=true
WINDOWID=41958279
GNOME_KEYRING_CONTROL=/tmp/keyring-GNxCNe
QTDIR=/opt/qt
GTK_MODULES=canberra-gtk-module
HISTFILESIZE=1000
USER=krivenok
GLADE_MODULE_PATH=:
SSH_AUTH_SOCK=/tmp/keyring-GNxCNe/ssh
SESSION_MANAGER=local/olimpico-mobile:@/tmp/.ICE-unix/3858,unix/olimpico-mobile:/tmp/.ICE-unix/3858
USERNAME=krivenok
MOZ_PLUGIN_PATH=/usr/lib/mozilla/plugins
XDG_CONFIG_DIRS=/etc/xdg:/etc/xdg
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/kde/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/opt/qt/bin
DESKTOP_SESSION=xfce
PWD=/home/krivenok
JAVA_HOME=/usr/lib/jvm/java-6-openjdk
GNOME_KEYRING_PID=3799
LANG=
PS1=\[\033[01;34m\]\u@\h \t\[\033[01;34m\] \w \$\[\033[00m\]
PS3=>
GDMSESSION=xfce
HISTCONTROL=ignoredups
PS2=>
PS4=+
HOME=/home/krivenok
SHLVL=2
XDG_CONFIG_HOME=/home/krivenok/.config
GTK_PATH=:/usr/lib/gtk-2.0
XDG_CACHE_HOME=/home/krivenok/.cache
LOGNAME=krivenok
XDG_DATA_DIRS=/usr/share/:/usr/local/share/:/opt/kde/share:/usr/share
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-dhoEuCXfIB,guid=6a08b000d2a68c3a6c6a704900000039
J2SDKDIR=/usr/lib/jvm/java-6-openjdk
PKG_CONFIG_PATH=:/opt/qt/lib/pkgconfig
PROMPT_COMMAND=history -a
WINDOWPATH=8
DISPLAY=:0.0
GLADE_CATALOG_PATH=:
LIBGLADE_MODULE_PATH=:
J2REDIR=/usr/lib/jvm/java-6-openjdk/jre
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/var/run/gdm/auth-for-krivenok-HKewEM/database
_=/usr/bin/env

HT4623 Please help I I have updated pc win 8, update itunes and i can open and access all in icould but my reminders will not load error message can't load reminders

I can not open my reminders in icloud, error message can't load reminders. Have hp win 8 and all has been fine until today for over a year. win updates are done and itune updates done, what should I do?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

Error message "Unable to load plug-in type"

Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
post create and update but we are getting this error on any entity updates and creates..
Any help on how to resolve this issue with be deeply appreciated.
thanks in advance,
Future MVP

While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
The solution I have is:
a. Import just the plugin assembly without the new plugin steps, and publish.
b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
c. The solution should now be imported successfully.
What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
HTH anyone else experiencing the same issue.
Henri

Error message "failed to load Tosrfcom" on Satellite Pro U200

Similar Messages

Maybe you are looking for