Error Message File: \ \src\rmsdk_api_readr.cpp Line: 1405 Expression: loc!=NULL

Please try on latest ADE version: 4.0.3

Similar Messages

Internal Software Error:.\Vobulator\Titleplaner\CVOBUPlanner.cpp,Line 331

I am very frustrated...
I am using Encore CS3 on a relatively fast system with 2g of ram. I have successfully burned disc using Encore CS3 but it is a crap-shoot. Sometimes it works and half of the time I get this:
Internal Software Error:.\Vobulator\Titleplaner\CVOBUPlanner.cpp,Line 331
I am trying to burn a simple disc - nothing crazy. A static menu with three chapters linked to 3 points on a 1hour and 45minute avi file in the timeline. I organize it check the project and everything is fine. I start the build and it begins to transcode - everthing is still good. After the transcode it begins to organize the disc or something - and that is when I get the error message.
I click OK on the dialog box and notice that the video in the timeline is now only 5 frames long and the audio is still there. (I thought the video had totally dissapeared but when I zoomed in for a closer look I realized it had ben reduced from almost 2 hours to 5 frames.) I look to the project window and it shows that the AVI has been transoded and it shows that time of the transoded file is normal length.... I am lost.
Anyone have any ideas?
Mat Cain

Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Also, for Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS

Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217

I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEX

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530

I am trying to make a movie and burn it to a disk for school but I keep getting that error (Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530) It occures after about 5 or 10 minutes of transcoding. The original file was a mkv file format with a dts audio and a avs video track.
Here is the detail of the video.
Format                           : Matroska
Format version                   : Version 2
File size                        : 6.56 GiB
Duration                         : 2h 10mn
Overall bit rate                 : 7 197 Kbps
Encoded date                     : UTC 2011-10-26 03:46:55
Writing application              : mkvmerge v4.8.0 ('I Got The...') built on May 24 2011 03:12:58
Writing library                  : libebml v1.2.0 + libmatroska v1.1.0
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 5 frames
Muxing mode                      : Header stripping
Codec ID                         : V_MPEG4/ISO/AVC
Duration                         : 2h 10mn
Bit rate                         : 5 689 Kbps
Width                            : 1 280 pixels
Height                           : 528 pixels
Display aspect ratio             : 2.40:1
Frame rate                       : 23.976 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.351
Stream size                      : 5.05 GiB (77%)
Writing library                  : x264 core 119 r2106 07efeb4
Encoding settings                : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=5689 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language                         : English
Audio
ID                               : 2
Format                           : DTS
Format/Info                      : Digital Theater Systems
Muxing mode                      : Header stripping
Codec ID                         : A_DTS
Duration                         : 2h 10mn
Bit rate mode                    : Constant
Bit rate                         : 1 510 Kbps
Channel(s)                       : 6 channels
Channel positions                : Front: L C R, Side: L R, LFE
Sampling rate                    : 48.0 KHz
Bit depth                        : 24 bits
Compression mode                 : Lossy
Stream size                      : 1.38 GiB (21%)
Language                         : English
Knowing that Encore does not support mkv I demuxed the mkv taking out the video track into a .h264 file using mkvextract. I then muxed it into a mp4 without the audio using mp4box then dragged it into encore without any problems. For the audio, I just demuxed it out into a dts and dragged that in as well. I then created a new timeline and dragged each peice of media into there corresponding sections on the time line. I tried to play the video but there was no audio. I treid to import the dts and got a warning saying something like, "DTS is supported in this version of Encore (CS5) but just not in preview. When I burn it to the disk there will be no problems" So I just went ahead and tried to build the video into a dvd folder for a dual layer disk.
The setting I have for the DVD is default except I changed the bitrate to 9.4mbps. That's the only thing I changed. (I used NTSC)
I played the audio using an external player to see if it plays and it did. When I check to see if there is any problems with the build it only says something about start remote and end action. I have never set them before so I don't think that should matter.
I have Encore installed on my secondary drive (Not C: which is windows) and I treid to create the DVD Folder on that drive. When I got this problem I just thought it was that it could not create the files on the drive because the program isn't running off that drive which it should be, I treid to create the DVD Folder on the C: drive and I still revieve the same error.
Does anyone know how I can get past this? I need this to be done by tomorrow for school in the morning.

Hi Stan and thank you for your concern, I was (I am) getting that in a timeline. and also a kind of general error when I was trying to build ether a folder or an image. I had made a copie of the project for me to delete all menus I also change all "end actions" who were on "stop" configuration but still my problem was there. In this project in encore two things I did witch may be the coz ot the problem?
-first when changing the menu styls and edition with Ps (maybe I did some thing wrong there?) and
-second when changing throught encore the markers on my principal time line witch maybe a did in a wrong way.
whatsoever thank you and sorry that I took a long time to answer, regarding my english writting you allready undertand that it is not my language. In addition I'm not a professional in editing but I'm still learning. I think it will be quiker for me to do the project again till the start on encore even if for me it wood be good for to know where the problem came from for me not to do it again.
Thanks a lot best regard
Fabian

"internal software error: \VCD\Primo\Primo Target.cpp,line 54" - Encore build DVD

When I'm ready with my Encor proj. to build the DVD, I go in the menu to Build, a popup comes up withe the next text "internal software error: \VCD\Primo\Primo Target.cpp,line 54" and it stops. Building disc is impossible. I've tried it with another (old) project, which is ready (and which I've already made a DVD) it gives the same error.The same error occurs trying to build a folder.

The only google hits for this error are this thread and the other one you found.
http://forums.adobe.com/thread/1274995?tstart=0
Odd error.
A similar error here:
http://forums.adobe.com/message/5736340#5736340
Getting the error building to a folder makes it espcially odd.
I did not find this site the last time, but primo appears to be a company:
http://www.primosoftware.com/

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

Itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

Hello pwithero,
The following article details the process of indicating to iTunes the correct location for the affected file.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Allen

What does the Error Message: "File format not supported" mean?

When I first open an existing project, I get an Error Message: "File format not supported". After a few seconds all the windows open up and I can continue to edit. My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up? All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate, 1920 x 1080.

More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
Also, are your files on an external drive?

Internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401 when burning DVD with sl

I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401

This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
hope this help someone else skip the frustration i had.

PDF file won't open after saving it from the web. get error message file is damaged.

My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?

I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

Rendering error message:File in use

Please help, I am trying to print a project to video but in the rendering process I get the error message: File in use by this or another application. I have no files in use in another application. MAC support is unfamiliar with the message and recommends uninstalling FCP and re-installing. Any other ideas as I am afraid of losing the project. Any help would be appreciated. Thanks, G.
G5 Mac OS X (10.3.9) FCP HD 4.5
G5 Mac OS X (10.3.9) FCP HD 4.5

If you rerender does the error go away? I know this comes up with Tiger and spotlight. I just disabled spotlight for my media drives. It does not look like you are running Tiger, usless your auto info has not been updated.
If you cannot render at all, then is is not spotlight.
I would try braking the timeline down in 1/2s. keep going until you get a render that works. You may be able to track down the exact clip that is having a problem. Good luck
Bob

I get error message file is corrupt for firefox 3.6

every time i try to download firefox 3.6 i get to extraction and i get an error message "file is corrupt." i do not like using the firefox beta version. can you try to help me figure out why i can not download or install or use 3.6. or can you come up with a newer version that is not beta whatsoever. i loved EVERTYHING about 3.6 until it stopped working on my laptop. i've even tried installing it on my desktop and i get the same error message. is it just the 3.6 version or is it something i'm doing wrong. please help me fix this.

You will need to create a new profile if you didn't create one for the 4.0 beta version.
See:
http://kb.mozillazine.org/Profile_Manager
[[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

When trying to change ringtone I keep getting the error message file type not supported.

I have downloaded some ringtones fro VZ Tones and when I go to make them the default it gives me the error message file type not supported. If I go to my storage and try to look at pictures, it tells me the same thing.

That's definitely odd CrystiDawn, and I understand it can be quite frustrating. Let's get to the bottomof this. What device make and model phone do you have? Did you receive a text message with a link to download the ringtones? If so, once downloaded, please go to all your Apps, locate "Files" and play the ringtone using the media player. You will have the option to set it as ringtone while playing and pressing the menu icon. Were the pictures taken from the phone or transferred using the USB cable?
AdaS_VZW
Follow us on Twitter at @VZWSupport

Error message: file was skipped because the old remote file could not be deleted.. Later it will up

Error message: file was skipped because the old remote file could not be deleted.. Later it will upload after i try a few more times. Not at my size quota for website (I have lots of room) , have toggled Passive FTP ...keeps happening. Is there a way to fix this? Thanks! I am using DW CS5 on Windows 7 platform. This does not happen when I upload otherwise on my computer - only when using DW.
It also only happens with the html files - it does not happen with my jpeg files

Do you have notes in your site? DW's local and remote site synching might be off. Try clearing your cache.
http://forums.adobe.com/thread/494811
Nancy O.

Error Message File: \ \src\rmsdk_api_readr.cpp Line: 1405 Expression: loc!=NULL

Similar Messages

Maybe you are looking for